TP-Link Tapo Camera User manual

• Keep the device away from water, re, humidity or hot
environments.
• Do not use damaged charger or USB cable to charge the
device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed.
• Adapter shall be installed near the equipment and shall be
easily accessible.
• Use only power supplies which are provided by manufacturer
and in the original packing of this product. If you have any
questions, please don't hesitate to contact us.
• For indoor use only.
• Do not disassemble, repair or modify the product.
• Do not use the product if the casing has been broken. Danger
of electric shock.
• Never touch the product with wet hands.
• Do not expose to heavy rain or any type of moisture.
• Do not place near automatically controlled devices such as re
alarms. Radio waves emitted from this product may cause such
devices to malfunction resulting in an accident.
• Observe restrictions on using wireless products in fuel depots,
chemical plants or when blasting operations are in progress.
• Do not use liquid to clean the product. Only use a dry cloth.
• Never put metal objects inside the product. If a metal object
enters the product turn o the circuit breaker and contact an
authorised electrician.
• This product is not intended to be used when providing
medical care. Consult the manufacturer of any personal
medical devices, such as pacemakers or hearing aids to
determine if they are adequality shielded from external RF
(radio frequency) energy.
• Do not use this product in health care facilities. Hospitals or
health care facilities may be using equipment that could be
sensitive to external RF energy.
TP-Link hereby declares that the device is in compliance with
the essential requirements and other relevant provisions of
directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)
2015/863. The original EU declaration of conformity may be
found at https://www.tapo.com/en/support/ce/
TP-Link hereby declares that the device is in compliance with
the essential requirements and other relevant provisions of the
Radio Equipment Regulations 2017.
The original UK declaration of conformity may be found at
https://www.tapo.com/support/ukca/
Pan/Tilt AI Home Security
Wi-Fi Camera
Quick Start Guide
7106509655 REV1.0.0 *Images may dier from actual products.
• Do not use this product near water for example near a bath tub,
wash bowl, kitchen sink or laundry tub, in a wet basement or
near a swimming pool.
• The product should be kept free from excessive smoke, dust or
high temperature and vibration.
• This product should not be exposed to direct sunlight
• Do not place heavy objects on top of the product.
• When you leave the product unused for a long time unplug the
product from the power outlet.
• Product should be kept away from heat sources such as
radiators, cookers etc. - it should not be placed in rooms where
the temperature is less than 0 degrees or greater than 40
degrees. Damp basements should also be avoided.
• This product may interfere with other electronic products such
as TV, radios, personal computers, phones or other wireless
devices.
• Operating Temperature: 0 °C ~ 40°C (32°F ~ 104°F)
• Operating Humidity: 10%~90%RH, Non-condensing
Please read and follow the above safety information when
operating the device. We cannot guarantee that no accidents or
damage will occur due to improper use of the device. Please use
this product with care and operate at your own risk.
©2022 TP-Link
Need some help?
Visit https://www.tapo.com/support/
for technical support, the user guide, FAQs,
warranty & more
?

System LED Indication
Blinking red and green
Blinking red slowly
Solid amber
Blinking red quickly
Solid red
Solid green
Blinking green quickly
Starting up
Connected to the cloud
Ready for setup
Connecting to Wi-Fi
Connected to Wi-Fi
Camera resetting
Camera updating
Plug in your camera and wait
until the LED blinks red and
green.
POWER UP
STEP 2
SET UP
STEP 3
Tap the button in the app
and select your model. Follow
app instructions to complete
setup.
DOWNLOAD APP
Get the Tapo app from the
App Store or Google Play.
STEP 1
Scan to download
Camera
Base
Mounting
Template
Camera
Mount Your CameraSet Up Your Camera
Place the mounting template
where you want the camera.
For wall mounting, drill two
holes through two circles.
1. Mark Position
Attach the camera on the
base and rotate to secure
the camera.
3. Secure Camera
2. Mount Base
Ax the camera base using
the screws.
For wall mounting, insert two
anchors into the holes and use
the screws to ax the camera
base over the anchors.
RESET Button
While the camera is on, press and hold the RESET
button for at least 5 seconds until the LED blinks red.
microSD Card Slot
Insert a microSD card and initialize it on the Tapo app
for local recording.
Appearance
Note: Tilt the camera lens up to nd the RESET button
and the microSD card slot.
Lens
System LED
Privacy Mode Button
Micro SD RESET
Micro SD RESET
Micro SD
Privacy Mode Button
Press the button to turn Privacy Mode on and o.
When Privacy Mode is on, the camera lens is hidden.
Package Contents
Power
Adapter
Mounting
Screws
Mounting
Anchors Quick Start Guide
Quick
Start
Guide
Slot & Button Explanation