TP Toys TP476 TP Kingswood2 Tower Quick guide

Shown with TP997 3m Slide
(Sold as an optional extra)
TP476 TP Kingswood2 Tower
Instructions for assembly, maintenance and safe use.
Please retain for future reference.
Robovision Ltd t/a TP Toys
Unit 11, Enterprise Way, Flitwick, Bedfordshire, MK45 5BX England
www.tptoys.com
THIS PRODUCT CONTAINS SMALL PARTS AND IS NOT SUITABLE FOR CHILDREN UNDER 36 MONTHS.
CONTAINS SMALL PARTS. CHOKING HAZARD.
ONLY FOR DOMESTIC USE. FOR OUTDOOR USE.
TOY MUST BE ASSEMBLED BY AN ADULT BEFORE USE.
ADULT SUPERVISION IS REQUIRED
CHILDREN MUST NOT USE THE EQUIPMENT UNTIL PROPERLY INSTALLED.
REMOVE ALL PACKAGING BEFORE GIVING TO YOUR CHILDREN.
THIS PRODUCT IS INTENDED FOR USE BY CHILDREN FROM AGES 3 TO 14 YEARS.
ANCHORS THAT ARE SUPPLIED WITH THIS PRODUCT MUST BE FITTED BEFORE USE.
MAXIMUM COMBINED USER WEIGHT 250KGS
WARNINGS!
x2
6
Hrs
Build Time
TP476 Kingswood2 Tower In0476-H 10 21.indd 1TP476 Kingswood2 Tower In0476-H 10 21.indd 1 12/10/2021 12:3012/10/2021 12:30

Important advice for assembly, maintenance and safe use
1. Toys must be assembled by an adult before use exactly in accordance with the instructions.
2. Check all parts are present before you start to assemble the product.
3. Place small parts on a tray or similar, to ensure they are not lost.
4. If any parts are missing do not use the product until the replacement parts are fitted.
5. Remove all packaging before giving to your children or allowing them to play with this product.
6. Ensure your product is sited on level ground. Failure to do this may put additional stress on connections and joints
and in time could cause them to fail.
7. Ensure your product is located on a soft impact surface like grass. Never locate your product on hard surfaces like
concrete or asphalt.
8. Children must not use this product until properly installed.
9. Adult supervision is required at all times to ensure children play safely. Ensure children’s clothing is appropriate for
the play activity.
10. Equipment should be checked by an adult at the beginning of each season and at regular intervals during the
usage season to ensure it is safe.
11. Pay special attention to all connections and fastenings.
12. Parts may need to be replaced if they show signs of wear and tear. Replace any defective parts in accordance
with these instructions.
13. Any changes to this toy, e.g. changing or adding an accessory, must be done in accordance with our instructions.
Failure to do this will render your guarantee null and void and may make your product unsafe.
14. The age recommendation for this product is clearly stated on the packaging and these instructions. Please adhere
to it at all times.
15. When you dispose of this equipment please do so responsibly.
Safe play free space area
The safe play area refers to the zone extending 200cm
around the toys on all sides and 250cm above the toy.
The safe play area must be free from all obstacles.
2m 2m
2m
2m
2m
2m
2m
2m
2m
TP997 3m Slide
TP969
Crazywavy Slide
TP Kingswood2 Tower
2
TP476 Kingswood2 Tower In0476-H 10 21.indd 2TP476 Kingswood2 Tower In0476-H 10 21.indd 2 12/10/2021 12:3012/10/2021 12:30

Know About Wood
Unlike steel, wood is a natural, organic material and each piece will be unique, bearing its own knots, cracks and
variations in colour and, unlike steel, wood will react significantly to changes in atmospheric conditions.
Wood will expand and contract as fluctuations of temperature and humidity affect the water content of the cell structure.
In warm sunny weather it will shrink and in wet weather it will expand. As these physical changes do not, necessarily,
take place uniformly throughout a piece of wood, forces are set up which cause cracks and splits to arise.
It is not necessary to stain your Wooden frame.
It is made from selected wood which has been pressure treated. This is a process by which preservatives are forced
under pressure into the fabric of the timber to protect it from decay and insect damage.
If you do wish to stain your Wooden frame for aesthetic reasons, please use a water-based stain, which is available from
any good DIY store.
Dimensions
480cm
225cm
255cm
134cm
TP997
3m
Slide
225cm
211cm
134cm
345cm
CrazyWavy Slide
Platform Heights: 116cm and 152cm
Height of set: 306cm (not including Flag)
TP Kingswood2 Tower
3
TP476 Kingswood2 Tower In0476-H 10 21.indd 3TP476 Kingswood2 Tower In0476-H 10 21.indd 3 12/10/2021 12:3012/10/2021 12:30

Pack 1
Pack 2
Pack 3
Contents - Please check
Screwdriver
Tools - You will need:
Spirit Level
Power
Screwdriver
10mm 13mm
Spanner
3mm Drill Bit
Pozi #2
Pozi #3
Tape
Measure
Wrench
Socket
13mm
Step
Ladder
MW2060 2606mm x2
MW2062 2500mm x2
MW2064 2105mm x1
MW2065 2250mm x2
MW2067 1582mm x2
MW2104 1700mm x2
MW2068 1582mm x1
MW2070 1206mm x2
MW2071 1346mm x1
MW2072 1111mm x1
MW2073 1583mm x1
MW2074 1136mm x1
MW2081 445mm x4
MW2082 390mm x1
PR5069 x4
TP Kingswood2 Tower
4
TP476 Kingswood2 Tower In0476-H 10 21.indd 4TP476 Kingswood2 Tower In0476-H 10 21.indd 4 12/10/2021 12:3012/10/2021 12:30

Pack 4
Pack 5
MW2103 200mm x2
MW2069 1066mm x2
MW2075 902mm x2
MW2076 573mm x1
MW2077 953mm x1
MW2078 1346mm x1
MW2079 674mm x2
MW2080 1206mm x1
MW2083 617mm x1
MW2084 617mm x1
MW2085 674mm x1
MW2086 532mm x1
MW2088 150mm x2
MW2090 1116mm x2
MW2094 605mm x1
MW2095 250mm x1
MW2029 974mm x11
MW2091 1200mm x4
MW2092 528mm x4
MW2093 574mm x9
MW2023 x32
MW2089 360mm x2
MW2096 912mm x4
MW2014 966mm x16
FB9985 x1
TP794
TP795
TP794
TP795
TP794 TP795
TP346
Universal Sandpit Cover
TP112 TP112
TP112
TP30 TP30
TP290 TP290
TP290 TP30
TP476 TP476
TP476
TP342
TP342
TP342
TP342
TP342
TP342
NOT A TOY
Removecover before play and
storecover in a safe place away
fromchildren.
WARNING
FactoryCut Marks FactoryCut Marks
CG346-B
Pleasecut as shown to fit your Sandpit.
Alsosuitable without cutting for
TP285and TP286
TP346 x1
MW2098 1115mm x2
MW2100 678mm x3
MW2101 535mm x4
MW2097 974mm x1
4 x 16mm x2
FA4527
PM1968 x1
PM1007
Flag x1
TP Kingswood2 Tower
5
TP476 Kingswood2 Tower In0476-H 10 21.indd 5TP476 Kingswood2 Tower In0476-H 10 21.indd 5 12/10/2021 12:3012/10/2021 12:30

Fixings - SP4761
M8 x 25mm
FA7184
45
M8
FA8163
30
M8 x 70mm x8
FA8439
5mm x 60mm x98
FA9768
5mm x 80mm x3
FA4521
5mm x 100mm x18
FA9761
4.5mm x 40mm x227
FA4517
M6 x 150mm x7
FA9784
Fixings - SP4762
M8 x 120mm x20
FA8434
M8 x 150mm x5
FA8760
M8 x 100mm x5
FA8437
Note:
Build frame on
level ground
Bolt Tightening Guide
3
8
8
TP Kingswood2 Tower
6
TP476 Kingswood2 Tower In0476-H 10 21.indd 6TP476 Kingswood2 Tower In0476-H 10 21.indd 6 12/10/2021 12:3112/10/2021 12:31

1
MW2062
MW2065
2
MW2060
Note:
Do not fully tigthen
Note:
Do not fully tigthen
M8 x 25mm
FA7184
x1
M8
FA8163
x1
150mm
M8
M8
ASSEMBLY TIP
MW2062 2500mm x1
MW2065 2250mm x1 M8 x 150mm
FA8760 x1
M8 x 150mm
FA8760 x1
M8 x 25mm
FA7184
x1
M8
FA8163
x1
MW2060 2606mm x1
Use MW2103
for support
ASSEMBLY TIP
Use MW2103
for support
150mm
M8
M8
TP Kingswood2 Tower
7
TP476 Kingswood2 Tower In0476-H 10 21.indd 7TP476 Kingswood2 Tower In0476-H 10 21.indd 7 12/10/2021 12:3112/10/2021 12:31

3
4
MW2075
MW2065
MW2062
90°
90°
Note:
Do not fully tigthen
MW2075
M8 x 25mm
FA7184
x2
M8
FA8163
x2
MW2075 902mm x1 M8 x 120mm x2
FA8434
Note:
Fully tigthen frame
ensuring MW2062
is vertical to
MW2065 & MW2075
Fit Flush
120mm
M8
M8
TP Kingswood2 Tower
8
TP476 Kingswood2 Tower In0476-H 10 21.indd 8TP476 Kingswood2 Tower In0476-H 10 21.indd 8 12/10/2021 12:3112/10/2021 12:31

5
6
MW2062
MW2065
Note:
Do not fully tigthen
Note:
Do not fully tigthen
MW2060
M8 x 25mm
FA7184
x1
M8
FA8163
x1
MW2062 2500mm x1
MW2065 2250mm x1 M8 x 150mm
FA8760 x1
M8 x 150mm
FA8760 x1
M8 x 25mm
FA7184
x1
M8
FA8163
x1
MW2060 2606mm x1
ASSEMBLY TIP
Use MW2103
for support
150mm
M8
M8
150mm
M8
M8
TP Kingswood2 Tower
9
TP476 Kingswood2 Tower In0476-H 10 21.indd 9TP476 Kingswood2 Tower In0476-H 10 21.indd 9 12/10/2021 12:3112/10/2021 12:31

7
8
MW2075
Note:
Do not fully tigthen
MW2075
MW2065
MW2062
90°
90°
M8 x 25mm
FA7184
x2
M8
FA8163
x2
MW2075 902mm x1 M8 x 120mm x2
FA8434
120mm
M8
M8
Note:
Fully tigthen frame
ensuring MW2062
is vertical to
MW2065 & MW2075
Fit Flush
TP Kingswood2 Tower
10
TP476 Kingswood2 Tower In0476-H 10 21.indd 10TP476 Kingswood2 Tower In0476-H 10 21.indd 10 12/10/2021 12:3112/10/2021 12:31

9
G
DETAIL G
SCALE 1 : 5
MW2070
MW2071
Note:
Do not fully tigthen
M8 x 25mm
FA7184
x4
M8
FA8163
x4
M8 x 120mm x4
FA8434
MW2070 1206mm x1
Note:
Do not fully tigthen
MW2071 1346mm x1
120mm
M8
M8
Note: 3 holes on top
TP Kingswood2 Tower
11
TP476 Kingswood2 Tower In0476-H 10 21.indd 11TP476 Kingswood2 Tower In0476-H 10 21.indd 11 12/10/2021 12:3112/10/2021 12:31

10 M8 x 25mm
FA7184
x8
M8
FA8163
x3
M8 x 120mm x1
FA8434
M8 x 100mm x2
FA8437
MW2081
MW2081
MW2081
MW2081 445mm x3
x1
M8 x 70mm x3
FA8439
90°
90°
ASSEMBLY TIP
Drill
3mm
Pilot
Hole
or
...then fully tighten bolts from Stage 9
x2
2x
M8
Note:
Ensure frame
is vertical
as shown...
TP Kingswood2 Tower
12
TP476 Kingswood2 Tower In0476-H 10 21.indd 12TP476 Kingswood2 Tower In0476-H 10 21.indd 12 12/10/2021 12:3112/10/2021 12:31

11
M8 x 25mm
FA7184
x4
M8
FA8163
x4
M8 x 120mm x4
FA8434
MW2067 1582mm x2
TP Kingswood2 Tower
13
TP476 Kingswood2 Tower In0476-H 10 21.indd 13TP476 Kingswood2 Tower In0476-H 10 21.indd 13 12/10/2021 12:3112/10/2021 12:31

12
M8 x 25mm
FA7184
x8
M8
FA8163
x4
M8 x 120mm x2
FA8434
MW2070 1206mm x1
MW2080 1206mm x1
MW2070
MW2080
5mm x 60mm
FA9768
x2
M8 x 25mm
FA7184
x1
M8
FA8163
x1
M8 x 120mm x1
FA8434
120mm Bolt
100mm Bolt
60mm Screw
x2
x2
MW2070
13 MW2068 1582mm x1
90°
90°
5mm x 80mm x1
FA4521
x2
M8 x 100mm x2
FA8437
TP Kingswood2 Tower
14
TP476 Kingswood2 Tower In0476-H 10 21.indd 14TP476 Kingswood2 Tower In0476-H 10 21.indd 14 12/10/2021 12:3112/10/2021 12:31

14 M8 x 25mm
FA7184
x1
M8
FA8163
x1
M8 x 120mm x1
FA8434
MW2077 953mm x1
MW2069 1066mm x2
MW2079 674mm x1
MW2077
MW2079
MW2069
MW2069
5mm x 100mm x7
FA9761
Note:
Do not fully tigthen
until 14B
approx
40mm
Drill 4mm
Pilot Holes
A
B
C
90°
Note:
Now tigthen
FA8434
120mm
TP Kingswood2 Tower
15
TP476 Kingswood2 Tower In0476-H 10 21.indd 15TP476 Kingswood2 Tower In0476-H 10 21.indd 15 12/10/2021 12:3112/10/2021 12:31

15 5mm x 60mm
FA9768
x10
MW2090 1116mm x2 MW2089 360mm x1
MW2090
MW2089
ASSEMBLY TIP
MW2090MW2089
50mm
15mm
Use
Deck board
for positioning
15mm
MW2090
Use
Deck board
for positioning
15mm
ASSEMBLY TIP
MW2090
50mm 15mm
TP Kingswood2 Tower
16
TP476 Kingswood2 Tower In0476-H 10 21.indd 16TP476 Kingswood2 Tower In0476-H 10 21.indd 16 12/10/2021 12:3112/10/2021 12:31

16
17
MW2073 1583mm x1
5mm x 100mm x2
FA9761
MW2072 1111mm x1
90°
565mm
565mm
Level
FA9784
M6 x 150mm x2
ASSEMBLY TIP
Use
Deck board
for positioning 15mm
TP Kingswood2 Tower
17
TP476 Kingswood2 Tower In0476-H 10 21.indd 17TP476 Kingswood2 Tower In0476-H 10 21.indd 17 12/10/2021 12:3112/10/2021 12:31

18
MW2029 974mm x11
MW2092 528mm x4
4.5mm x 40mm x44
FA4517
A
B
C
B
C
MW2097
x1
MW2092
x4
MW2029
x11
3mm
MW2097 974mm x1
397mm
Note:
Equal
Spacing
TP Kingswood2 Tower
18
TP476 Kingswood2 Tower In0476-H 10 21.indd 18TP476 Kingswood2 Tower In0476-H 10 21.indd 18 12/10/2021 12:3112/10/2021 12:31

19
20
5mm x 60mm
FA9768
x8
Note:
Equal
Spacing
MW2064 2105mm x1 M8 x 25mm
FA7184
x1
M8
FA8163
x1
M8 x 150mm
FA8760 x1
MW2098 1115mm x2
Note:
This side
TP Kingswood2 Tower
19
TP476 Kingswood2 Tower In0476-H 10 21.indd 19TP476 Kingswood2 Tower In0476-H 10 21.indd 19 12/10/2021 12:3112/10/2021 12:31

21
22
MW2076 573mm x1
M8 x 25mm
FA7184
x2
M8
FA8163
x2
M8 x 120mm x2
FA8434
MW2083 617mm x1
M8 x 25mm
FA7184
x1
M8 Nylon Insert
FA8163
x1
M8 x 120mm x1
FA8434
TP Kingswood2 Tower
20
TP476 Kingswood2 Tower In0476-H 10 21.indd 20TP476 Kingswood2 Tower In0476-H 10 21.indd 20 12/10/2021 12:3112/10/2021 12:31