TPI CEH / 3380 SERIES User manual

INSTALLATION INSTRUCTIONS
2 X 2 T-BAR MOUNTING KIT
MODEL TB3380A
FOR USE WITH CEH/3380 SERIES HEATERS
INSTALLATION
INSTRUCTIONS
CAUTION: Disconnectsupplyservicetoavoidelectricalshock.
All wiring connections must conform to the National Electric Code and local codes having jurisdiction.
NOTE:Assembly less grill and wiring compartment cover prior to placement in grid, may simplify installation.
1. Remove any part kits or packing from heater.
2. Remove the required K.O. from the ceiling box.
3. Removewiringcompartmentcoverifinstalled.Assembleheater,adapter plate and ceiling box in the order as
shown. Secure the parts with the screws provided.
4. Place the above assembly in the T-bar grid.
5. Attach conduit or cable and make wiring connections and install wiring compartment cover.
6. Installgrille,restorepowerand check heater operation ( See installation sheet provided with heater).
INSTALLATION
INSTRUCTIONS
IMPORTANT: OWNER SHOULD RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
ECO 1-5757 7/07 FORM 9743
CEILING BOX
T-BAR ADAPTER
PLATE
HEATER
WIRING COMPARTMENT
COVER
GRILLE