TradeQuip 6019T User manual

Visit us at www.tqbbrands.com.au
ASSEMBLY INSTRUCTIONS FOR:
WORKSHOP TOOL TROLLEY
2 DRAWER/LOCKABLE/SLIDING TOP
PRODUCT CODE: 6019T
Thank you for purchasing this TradeQuip product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS &
CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO
MAY CAUSE DAMAGE AND/OR PERSONAL INJURY, AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE
FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
Only use this Workshop Tool Trolley for the purpose for which it has been designed.
Do not modify any component of this Workshop Tool Trolley.
When servicing, use only TradeQuip identical replacement parts. Use of any other parts
will void the warranty.
Safe Working Capacity 100kg
Each Drawer Capacity is 8kg
Upper Tray Capacity is 40kg
Bottom Tray Capacity is 40kg
Do not open more than 1 drawer at a time to avoid tipping of Workshop Tool Trolley.
Do not put/rest a heavy load on an open drawer
This product is intended for indoor use only.
2. CONTENTS & SPECIFICATIONS
Safe Working Capacity 100kg
Drawer Capacity (each) 8kg
Upper Tray Capacity 40kg
Lower Tray Capacity 40kg
3. PARTS LIST
Part #
Description
QTY
A
Upper Tray with Liner
1
B
Legs
4
C
Handle
2
D
Lower Tray
1
E
Castors w/brake
2
E
Castors
2
F
Bolts
33
G
Drawer Set
1
H
Nuts
33

Visit us at www.tqbbrands.com.au
4. ASSEMBLY INSTRUCTIONS
Attach the same diameter castors on each side
:
Attach handles to sides