Traice TR-S1.3AN/20-DV User manual
TR-S1.3AN/20-DV
Analogue Indoor Dome Camera
Varifocal lens
Before providing power for the camera, please read this
user guide.
Do not attempt to disassemble the camera. If the
camera does not work, please contact us or your local
distributor.
SPECIFICATIONS
FEATURES
NOTES:
Model Number TR-S1.3AN/20-DV
Platform Analogue
Sensor Chip 1/3" Sony 1.3 MP sensor
TV System NTSC / PAL (selectable by OSD menu)
Resolution 1000 TVL
IR Distance 20 meters (21 pcs IR LED's)
Lens 2.8-12mm varifocal lens
Min. Illumination 0.01 Lux / F1.2
S/N Ratio >50dB
Scanning System 2:1 interlace scan
Shutter Speed Up to 1/100,000 s
Video Output 1Vp-p, 75Ω
Video Compression N/A
Bit Rate N/A
Max Image Size N/A
Frame Rate N/A
Streaming N/A
Protocol Compliancy N/A
Protocol N/A
Wide Dynamic Range Real WDR
Auto Gain Control Yes
Back Light Compensation On / off
DNR 3D-DNR
White Balance Auto
Storage Temperature -30 to 60°C
Operating Temperature -10 to 50°C
Operating Humidity 95% max
Power Source DC12V / 350mA
Indoor dome camera
1000 TVL analogue camera
20m IR distance
2.8-12mm varifocal lens
www.traicecctv.com
www.facebook.com/traicecctv
www.twitter.com/traicecctv
DISTRIBUTED BY:
OSD MENU CONNECTIONS INTRODUCTION
TROUBLESHOOTING
SCHEMATICS
OSD
SET
IMAGE
3D-NR ON/OFF
AE MODE
global / center
center weight / black light
front light / distinguish
WB
AWB-PRO / AWB-TEMPORAL
AWB-AI / / AWB-SZ
AWB-GW / AWB-CCT
IMAGE
ENHANCE
sharpness / contrast /
saturation
MIRROR ON / OFF
FLIP ON / OFF
BRIGHTNESS 0, 10, 20,... 250
ZOOM IN 50, 60, 70, 80, 90, 100
DAY&NIGHT auto / IR-Cut
ZONE
MASKING
COLOR
mosaic / white / yellow / cyan
green / magenta / red / blue /
black
AREA NO.0 - AREA NO.7
MOTION
DIRECTION
SENSITIVITY weak / low / middle / high
AREA NO.0 - AREA NO.3
VIDEO
STANDARD PAL / NTSC
LANGUAGE CHINESE / ENGLISH
LOAD DEFAULT
SOFT VERSION
SAVE&EXIT
EXIT
VIDEO
DC12V
DC12V POWER SUPPLY
TR-S1.3AN/20-DV
KEYBOARD
PRESS
MENU
1. NO VIDEO OUTPUT AFTER PROVIDING POWER
Check power supply stability
Check power supply polarity
Check video cable signal from camera to DVR using a
TRAICE CCTV tester
Test camera output directly from camera to TRAICE CCTV
tester to ensure video cable and termination is correct
2. FLOWING INTERFERENCE RIPPLES ON VIDEO OUTPUT
Caused by power supply AC ripples, change power supply
Check monitor and DVR
3. CONTINUOUSLY CHANGING VIDEO BACKGROUND
COLORS
Caused by uorescent lighting, change the lighting or
increase distance between lighting and camera
Use external synchronization on power supply
4. PICTURE SMEAR
Unstable power supply voltage, change the power supply
High impedance on cables, check cable quality and
termination
Congratulations for purchasing a TRAICE product. The TR-
S1.3AN/20-DV is a feature-full product that adopts the latest
Sony sensor chip and driver. This camera enjoys high resolution
and real-time video capturing that is rich in colour and quality. It
is also easy to install with a built-in 3-axis adjustable lens making it
both wall mount and ceiling mount.
“Please read this instruction manual carefully to ensure proper use of
the product.”
Please note the camera’s storage and operating temperature
Avoid using the camera in environments of very high or very
low temperatures.
The operating temperature is -30°C to +60°C
(Recommended operating temperature is -10° C to +50°C)
Never make the camera face the sun or a bright object.
Do not mount the camera near by the radiator or heater.
Do not attempt to disassemble the camera. If the camera
does not work, please contact local distributor or our
company
CAUTION: RISK OF ELECTRIC
SHOCK, DO NOT OPEN
NOTES:
DVR
POLARITY GUIDE
GND VIDEO
VIDEO
POWER
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER OR BACK. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
CAUTION: TO PREVENT ELECTRIC SHOCKS AND
RISK OF FIRE HAZARDS, DO NOT USE OTHER THAN
SPECIFIED POWER SOURCE.
