Trail Tech VOYAGER PRO User manual

Voyager Pro User's Guide
User's Guide Help
Hello Adventurer!
Trail Tech brings functionality and life to your motor vehicle with high quality
and innovation. To ensure long and trouble-free operation, this embedded
user's guide contains valuable information about how to operate and
maintain your digital gauge properly.
Please read this manual carefully.
Tap the ? in the top corner of menu screens to get useful tips and
information.
Use the lin s below to navigate.
Thanks for riding with Trail Tech!
Precautions Help
1. To charge Voyager Pro using a wall outlet, a Trail Tech approved wall
charger is required. Attempting to charge Voyager Pro directly off an outlet
will result in failure of your device.
2. Read all instructions before using Voyager Pro.

3. Avoid contact with gasoline, degreasers or other chemical cleaners.
4. Do not wash with pressure washer.
5. When installing Voyager Pro, disconnect the vehicle battery.
6. When installing radiator hose temperature sensors, ma e sure it fits
BEFORE cutting the radiator hose.
7. Chec gap between wheel sensor and magnet periodically to ensure
correct measurements and reading on Voyager Pro.
8. Do not bend, twist, in or abuse the sensor cables.
9. Do not disassemble Voyager Pro or its accessories.
10. Do not operate Voyager Pro while driving/riding.
11. Do not rely on Voyager Pro for operations requiring precise
measurements of distance or direction. All GPS devices inherently contain
some amount of error. Use the wheel sensor for the most precise data.
12. PAY ATTENTION TO THE TRAIL!
FA Help
How do I take a screenshot?
Press the menu button and the up button at the same time. A JPG image file
will be saved the the MicroSD memory card. If you share it on social media,
tag us #ridetrailtech

How long does the internal battery take to
charge fully?
Voyager Pro ta es 3-8 hours to fully charge depending on charge mode. You
don't need to pre-charge; connect and ride.
How do I get the best GPS reception?
The internal antenna is designed for optimum reception potential. If Voyager
Pro is mounted with metal bloc ing the internal antenna, consider
purchasing an external GPS antenna for better positioning.
How do I mount Voyager Pro to my machine?
Voyager Pro is compatible with RAM mounts. Vehicles with handlebars can
use the included handlebar mounting hardware. There are also protective
accessory mounts available, or use the doc 's four mounting holes for
dashboard mounting.

What kind of power does Voyager Pro need
for proper operation?
Voyager Pro requires DC power to function and charge correctly. DC power
systems with a failing vehicle battery may produce too low a system voltage
(<11.5V) to allow for proper operation. For applications where DC power is
not available, Trail Tech offers an AC wall charger for Voyager Pro to charge
the internal battery.
Voyager Pro kits include physical sensors,
magnets, and other cables. Why, if it's a GPS?
You can use Voyager Pro without any sensors connected. However,
connecting the vehicle sensors enables several features, li e extra gauges,
more precision, and battery charging.

My other GPS unit gets along just fine without
a wheel sensor, do I really need one?
All speed/distance data can be gathered from either GPS or the wheel
sensor.
Trail Tech believes an accurate odometer and hour meter are critical
features. To maintain this accuracy, a wheel sensor is recommended.
1. When using a wheel sensor, Voyager Pro nows to stop logging when the
vehicle stops moving. When you start rolling again, Voyager Pro nows to
resume logging (without a GPS induced lag.)
2. The wheel sensor will trac distance, even when the GPS signal is out of
range.
3. GPS cannot tell the difference between a motorcycle moving under its
own power or in the bac of a truc .
4. The GPS signal can be lost, especially around metal structures or in
tunnels. With no signal, speed and distance accuracy is lost.
5. GPS cannot see small changes in elevation (i.e. whoops and ruts.) Over
time this will create significant odometer error.
6. GPS is accurate while travelling in straight lines at constant velocity.
However, tight, fast corners will cause the GPS to s ip over part of your
path. Over time this will contribute to odometer error.
Can Voyager Pro use GPX files?
GPX (GPS exchange format) is Voyager Pro's native format. Import/export
recorded trac s between the MicroSD and dozens of software programs and
web services.