TrailMax 104071 User manual

Position brackets using
measurements from previous
table.
Cut crossing the rubber over
the ditch ensuring you do not
damage painted vehicle
surface, them remove
sections "B" and "D" to fit item
14.
Inspect for paint scratch and fill
with anti-corrosive spray paint.
104071
injected mounting bracket system

Inspect under to assure side airbag clearance,
slide in cardboard to guide out swaff,
Use 5 mm depth stop on drill,
re seal cut hole
Do not drill or damage side
airbag. It is the responsibility of the
installer to ensure airbag is not
damaged during or after installation.
Please ensure you install
bolts ( item "22") before
rivoting on brackets.
Position brackets using measurements from
previous page table. mark hole positions
accuaratly
104071
injected mounting bracket system
1- Use SEALANT arround all roof holes
before place brackets to protect and seal.
2- Clean the sealant excess
after placement of roof -
brackets.
20
20
22 24
89
22
24
24
24
24 24
61
89 35