Tranberg TEF 1239 User manual

R. Stahl Tranberg AS
E[email protected] | stahl-tranberg.com
Main office: Strandsvingen 6 | N-4032 Stavanger | Norway | T+47 51 57 89 00 | F+47 51 57 89 50
Office Oslo: Luhrtoppen 2 | N-1470 Lørenskog |Norway | T+47 24 08 44 10
IMPORTANT
Read this instruction carefully before installing the
product
INSTALLATION
TEF 1239 WATERTIGHT SWITCH
SAFE AREA
USER MANUAL
Subject to change without prior notice TUM1034 REV. C 17.07.2017

TEF 1239 WATERTIGHT SWITCH USER MANUAL
INTRODUCTION
Thank you for purchasing this product!
For installation, maintenance and assurance of a long life
of this product, please follow this manual.
CONTENT IN BOX
The product is fully assembled, and ready for installation.
SAFETY PRECAUTIONS
Note that changes made to the product and/or installation
of components which do not conform to the approval,
may be a safety violation. The manufacturer will in no
circumstance be held responsible for such activity.
For your health and safety, always use safety gear suited
for the task. Be certain to follow codes, regulations and/or
specific procedures that are related to the installation.
TOOLS REQUIRED
Regular tools required for installation:
• 3mmflatscrewdriver–forthescrewonthetopoftheswitch.
• 6,5 mm flat screwdriver - for connecting switch and
earth screw.
• 10 mm flat screwdriver - for blindplug.
• 27 mm wrench – for cable gland.
• 25 mm wrench – for tightening the pressure nut.
MAINTENANCE INSTRUCTIONS
The switch should be inspected according to Company
routines. The manufacturer suggests regular check for
water intrusion/condensation which should be removed
immediately.
APPLICATIONS
• 2 POLE Amp. 250V AC
• Switch for use in marine environment and safe area.
• For use in harsh environments and adverse weather
conditions.
APPROVALS
Certificate NEMKO GR.1.112.6 or 14.1.112.6

TEF 1239 WATERTIGHT SWITCH USER MANUAL
INSTALLATION INSTRUCTIONS
SPARE PARTS
Description Rart No.
Switch insert 5081 0011
Cable gland, M25, marine 5591
Stopping plug, M25, marine 5590
Neoprene gasket for shaft 5003 0013
Neoprene gasket for cover 5000 0027
Switch lid with gasket 1000 0027
Bracket 6037
Be sure to install the cable in a way wich prevents water to
penetrate into the enclosure through the cable.
Ensure the cable glands provide a proper seal towards the
cables. Change the gaskets in the glands if required.
Unused cable glands should be replaced with a blind plug.
Terminate the cables directly to the switch. For safety rea-
sons, ensure both conductors are terminated to the 2-pole
switch.

R. Stahl Tranberg AS
E[email protected] | stahl-tranberg.com
Main office: Strandsvingen 6 | N-4032 Stavanger | Norway | T+47 51 57 89 00 | F+47 51 57 89 50
Office Oslo: Luhrtoppen 2 | N-1470 Lørenskog |Norway | T+47 24 08 44 10
TEF 1239 WATERTIGHT SWITCH USER MANUAL
TECHNICAL DATA
Material: Cast brass
IP-rating: IP 56
Standard cable entries: 2 x M25 cable gland
Area of use: Safe area / marine
Weight: 0,9 kg.