Trane has a policy of continuous product and
product data improvement and reserves the right
to change design and without notice.
Literature Order Number: Wall Thermostats
6002rpA:etaD
Supersedes: Jan 2006
Stocking Location: Bangkok, Thailand
TRANE HVAC PARTS CENTER
ÿ
ÿ
http://www.tranethailand.com
A business of American Standard Companies
Display unit / Receiver
LCD Wireless Remote Control
Note : These the rmostats can be used for both refrigerant system of chilled water coil system.
30th-31st Floor, Vanit Building II
1126/2 New Petchburi Road,Makkasan,
Rachthevee,Bangkok 10400 Thailand
Tel. 02-704-9999
LCD Wireless Remote Control
Name and function of buttons
1. Power button
- Press this button to start operation
at setting condition
- Press this button again to shut down
the operation
2.Fan button
- Press this button to select fan speed
3. Mode button
- Press this button to select system
operating modes. In cooling only system,
a mode is selected in a sequence as FAN,
COOL, DRY, and back to FAN
4.Temperature setting buttons
Temp : Press this button to increase
the set temperature
Temp : Press this button to decrease the
set temperature
5. SWEEP button [SW]
- Press this button to activate sweep motor
6. LOUVER button [LV]
- Press this button to adjust the direction
7. POWERCOOL button
- Press this button to activate POWERCOOL
mode in COOL or DRY operating that the fan
runs at high speed and temperature set at
18 C for 20 minutes
- Press this button again to deactivate
POWERCOOL mode
8. ECONO button
- Press this button to activate ECONO mode
COOL operating that the fan runs at low
speed and temperature is adjustable
- Press this button again to deactivate ECONO mode
9. SLEEP button
- Press this button to control temperature automatically
in COOL or DRY operating while sleeping; temperature
will increase 0.5 C after 1 hour passed since SLEEP
operating activated, then 30 minutes later temperature
will increase another 0.5 C
- Press this button again to deactivate SLEEP mode
10. CLOCK button
- This button is for setting the clock; pressing or
to set number in hour and minute.
11. AUTO START button ON
- This button is for setting the automatic start timer;
pressing or to set number in hour and minute.
12. AUTO STOP button OFF
- This button is for setting the automatic shutdown
timer; pressing or to set number in hour
and minute.
13. SEND
on the remote controller to the fan coil unit
14. IONIZER button [ION] (Optional)
- This button is to operate the ionizer function
however it depends on model of air conditioning
unit is applicable
15. KEYLOCK button
- Press this button to lock and unlock the programming
set on the remote controller to protect change of
programming
