Transcend StoreJet SJM100 User manual

The SJM100/300/500 comes bundled with Transcend Elite, which
enables the StoreJet’s One Touch Auto-Backup button (available on
select StoreJet models only). See the Elite Software User’s Manual
for details. The Transcend Elite software is available for download at
www.transcend-info.com/downloads.
The StoreJetToolBox only works on Windows—Please see the
“Formatting the Hard Drive”section of this manual for more
information. The StoreJetToolBox software is also available for
download at www.transcend-info.com/downloads.
Do not connect the Thunderbolt cable and the USB cable
simultaneously.
The SJM100/300/500 is pre-formatted for use with Mac OS. To use it
with Windows, please reformat with NTFS
Please do not break or remove the warranty sticker on your
Transcend product as this will void your product warranty.
Desktop or notebook computer with a working Thunderbolt / USB port. You
will need one of following Operating Systems:
Windows users must install certain drivers on their computer to use the Thunderbolt
connection. Please visit the link below to download the drivers:
www.transcend-info.com/downloads.
1.
2.
3.
4.
5.
Note:
System Requirements
The SJM100/300/500 comes bundled with Transcend Elite, an advanced new software
developed for use with Transcend's JetFlash, StoreJet and Portable SSD products. Elite
includes powerful and user-friendly applications that help you keep your important
data organized, protected and up-to-date. To install the software, run the
“TranscendElite.exe” le located in the root directory of your SJM100/300/500. Please
read the Software User’s Manual for detailed instructions on how to best use the
software with your StoreJet. For more information or to download the latest version of
Transcend Elite, please visit www.transcend-info.com/downloads.
Transcend Elite Software
StoreJet for Mac Quick Start Guide
USB3.0 Windows® 8.1
Windows® 8
Windows® 7
Mac® OS X 10.5+
Linux® Kernel 2.6.31+
Thunderbolt Windows® 8.1
Windows® 8
Windows® 7
Mac® OS X 10.6+

When the SJM100/300/500 is successfully
connected to a computer, the LED will light up. A
new disk drive icon will appear on the desktop
and a new device with volume name will also
appear on the left side bar of Finder.
Note: (C:) and (D:) above are example drive
letters; the letter on your "My Computer"
Note: “New Volume” is an example drive. The
Connecting to a Computer
Thunderbolt / USB Cable
Thunderbolt Connector
Thunderbolt
USB 3.0
USB 3.0 Micro B Type Male
Thunderbolt Connector
USB 3.0 A Type Male
Mac
Windows