Tremblay SA EN292 User manual

BASKETBALL STAND
INSTRUCTIONS MANUAL
EN292
1 adult

WARNING
2
ASSEMBLY STEPS
1. Aached the rim (1) on the top pole (2), at the joint by
using four bolts (6), through four washers (7) and four lock
nuts (8).
2. Connect the top pole (2), middle poles (3) and boom pole
(4) one piece by one piece, then to insert them into the
base (5).
3. Fix all the poles by screws (9).
4. Fill the base with sand (or water), then put the cap (10) on
it.
PARTS LIST
1. Rim x1
2. Top pole x1
3. Middle pole x2
4. Boom pole x1
5. Base x1
6. Bolt x4
7. Washer x4
8. Lock nut x4
9. Screw x3
10. Base cap x1
 Not suitable for children under 3 years. Contains small
parts and long cord.
 This product should only be used under direct adult su-
pervision.
 This product should be assembled by an adult.

ASSEMBLY DRAWING
3
6
9
1
2
7
8
9
3
3
10
9
4
5

Arcle compliant with :
 EN71–Part1: 2014 - Mechanical and Physical Properes
 EN71–Part2: 2011+A1:2014 - Flammability
 EN71 - Part 3:2013 + A1 :2014 - Migraon of certain elements
Imported and distributed by
TREMBLAY SAS
90 rue de la Farnière - ZAC d’Epinay
69400 Gleizé
France