TRENDnet TE100-P1U User manual

TE100-P1U
Quick Installation Guide

Table of Contents
Table of Contents
Version 10.08.2007
English ...................................................................................................... 1
1
2
3
5
7
1. Before You Start
2. How to Install .....................................................................................
3. Configure the Print Server .................................................................
4. Add the Printer to your PC .................................................................
.................................................................................
Troubleshooting ........................................................................................

1. Before You Start
English
1
Package Contents
System Requirements
Application
?
?CPU: 300MHz or above/ 800MHz or above (Windows Vista)
?Memory: 256MB RAM or above/ 512MB RAM or above (Windows Vista)
?indows Vista/2003 Server/XP/2000/ME/98SE, Unixware, Linux,
Mac OS X
C
W
D-ROM Drive
?
?
TE100-P1U
Quick Installation Guide
Utility CD-ROM?
?AC Power Adapter (5V DC, 2.5A)
*Mac Systems are only compatible with Post-Script printers
1-Port
USB 2.0 Print Server
(TE100-P1U)
10/100Mbps
USB 2.0 Printer
Cable/DSL
Modem
Internet
Workstations with
Fast Ethernet PCI Adapter
(TE100-PCIWN)
Cable/DSL 4-Port
Broadband Router
(TW100-S4W1CA)

2. How to Install
English
2
Note: Please power off all printers before connecting them to the print server.
1. Connect a RJ-45 network cable
from a Switch/Router to the LAN
port of the Print Server.
2. Connect the USB Printer to the
USB port on the Print Server.
4. Power ON printer.
3. Connect the AC Power Adapter to
the Print Server and then to a
power outlet.

English
3
1. Insert the Utility CD-ROM into
your computer's CD-ROM Drive
and then click Utility > PS Utility.
3. Click Start > Programs > PS-
Utility, and then click PS-Utility
v3.11.
2. Follow the InstallShield Wizard
instructions. Click Finish.
3. Configure the Print Server
Note: The Print Server can be managed using the PS-Utility or a web browser.
For Mac users, change your computers IP address to 192.168.0.X (where X is
an available number from 2-254). Since the Print Server's default IP address is
192.168.0.1, make sure no other network devices are assigned an IP address
of 192.168.0.1. Then enter http://192.168.0.1 in your web browser to access
the Print Server's Web Utility.
For Windows Users

6. Click Show Web Setup.
5. Click OK.
English
4
4. Select the Print Server and click
Change IP Address.
Manually assign the IP Address of
the Print Server and then click OK.
Note: The IP Address must match
the network segment of your
network.
Print Server configuration is now complete.
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
register your product Online at: www.trendnet.com/register
Thank you for choosing TRENDnet

English
5
4. Add the Printer to your PC
Note: For printing instructions for Windows ME and 98SE, please consult the
User's Guide included on the Utility CD-ROM.
Windows Vista/2003 Server/XP/2000
2. Select the print server, select the
desired port and then click Add
Printer.
1. Click PS Wizard and then click
Win 2000/XP/Vista.
3. Click Select from manufacturer
list. Select the appropriate driver
for your printer and then click Next.

English
6
Add Printer is now complete.
For detailed information regarding the TE100-P1U configuration and advanced
settings, please refer to the User's Guide on the Utility CD-ROM or
TRENDnet's website at www.trendnet.com
5. Click Print Test Page.
4. Click Next.
7. Click Finish.
8. Repeat steps 1 to 7 to add the
printer to other computers on the
network.
6. Click OK.

Q1.
A1.
Q2.
A2.
Q3.
A3.
Q4.
A4.
The PS Wizard / PS Utility is unable to see my printer server. What should I
do?
First, double check your hardware connections; make sure that the print
server and printer are powered ON and are properly connected. Second, click
Discover. Third, disable any software firewall programs (e.g. ZoneAlarm). If
your computer is running Windows XP or Vista, disable the built in firewall
program.
I successfully added a printer to my computer and I can print a test page, but I
cannot print anything from Microsoft Word or other applications.
Make sure to set the newly installed network printer as your default printer.
Click Start and then click Printers & Faxes, verify that your printer icon has a check
on it.
I configured my print server to automatically receive an IP Address from a
DHCP server, and now I cannot go into the Print Server’s web utility.
Open PS-Utility v3.11 (See 3. Configure the Print Server) to locate your print
server’s IP Address. For MAC users, press the Reset button at the back of the
TE100-P1U, hold the button for 15 seconds, release the button, and enter
http://192.168.0.1 in a web browser to access the web utility feature.
How do I setup the TE100-P1U on a Mac?
Type in http://192.168.0.1 in you browser to logon to the built-in web
configuration.
If you still encounter problems or have any questions regarding the TE100-P1U, please
refer to the User's Guide included on the Utility CD-ROM or contact TRENDnet’s
Technical Support Department.
7
Troubleshooting

Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received. Including interference that may
cause undesired operation.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
Waste electrical and electronic products must not
be disposed of with household waste. Please
recycle where facilities exist. Check with you Local
Authority or Retailer for recycling advice.
ADVERTENCIA
En todos nuestros equipos se mencionan claramente las caracteristicas del adaptador de
alimentacón necesario para su funcionamiento. El uso de un adaptador distinto al
mencionado puede producir daños fisicos y/o daños al equipo conectado. El adaptador
de alimentación debe operar con voltaje y frecuencia de la energia electrica domiciliaria
existente en el pais o zona de instalación.

Copyright ©2007. All Rights Reserved. TRENDnet.
TRENDnet Technical Support
Product Warranty Registration
Please take a moment to register your product online.
Go to TRENDnet’s website at http://www.trendnet.com/register
US Canada
24/7 Tech Support
Toll Free Telephone: [phone]
Europe (Germany France Italy Spain Switzerland UK)
English/Espanol - 24/7
Francais/Deutsch - 11am-8pm, Monday - Friday MET
English/Espanol - 24/7
Francais/Deutsch - 11am-8pm, Monday - Friday MET
Worldwide
Telephone: +(31) (0) 20 504 05 35
Toll Free Telephone: [phone]
.
. . . . .
20675 Manhattan Place
Torrance, CA 90501
USA