TRENDnet TE100-P11 User manual

TE100-P11
TEW-P11G
H/W: V1
Quick Installation Guide

Table of Contents
Table of Contents
Version 12.12.2008
English ...................................................................................................... 1
1
3
4
1. Before You Start
2. How to Install .....................................................................................
3. Configure the Print Server .................................................................
.................................................................................
Troubleshooting ........................................................................................ 8

1. Before You Start
English
1
Package Contents
System Requirements
?
?Windows 98SE/Me/2000/XP/2003 Server/Vista
?Wired or Wireless Router
?An Available DHCP Server – routers usually have a built-in DHCP server
CD-ROM Drive
?
?
?Multi-Language
?
TE100-P11/TEW-P11G
Utility CD-ROM
Quick Installation
Guide
AC Power Adapter (5V DC, 2A)

English
2
Application
2-Port USB/Parallel Print Server
(TE100-P11)
Cable/DSL
Modem
Parallel
Printer
USB
Printer
4-Port Gigabit Firewall Router
(TWG-BRF114)
Internet
10/100Mbps
Workstation with
10/100Mbps PCI Adapter
(TE100-PCIWN)
Worstation with
10/100Mbps PCI Adapter
(TE100-PCIWA)
Cable/DSL Modem
Internet
USB
Printer
Parallel
Printer
Wireless 2-Port
USB/Parallel Print Server
(TEW-P11G)
Workstations with
Wireless N USB Adapter
(TEW-644UB) Wireless N Home Router
(TEW-652BRP)
Wireless g 54Mbps

2. How to Install
English
3
1. Connect a RJ-45 network cable
from the LAN port on your Router
to the LAN port of the Print Server.
4. Power ON printer.
3. Connect the AC Power Adapter to
the Print Server and then to a
power outlet.
Note: Please power off all printers before connecting them to the print server.
Then turn on each printer after you make your hardware connections.
2. Connect a Parallel or USB Printer
to the printer server.

English
4
1. Insert the Utility CD-ROM into
your computer's CD-ROM Drive.
2. Click Run autorun.exe (Windows
Vista only).
3. Configure the Print Server
Note: Disable any anti-virus and firewall programs before starting hardware
installation.
For Windows Users
4. Click Next.
3. Click Setup Wizard.

Note: If you have the TE100-P11, skip to step 11. If you have the TEW-P11G,
continue on step 8.
English
5
5. Select the print server and then
click Next.
6. If desired, change the Device
Name, Domain Name and add a
Comment (optional). Then click
Name.
7. Select the Obtain IP Address
automatically and then click Next.
8. Select the desired wireless
network and click Next.

English
6
10. If enabled, enter the encryption
key for your wireless network and
then click Next. This example
shows WPA2-PSK.
9. The correct wireless settings
should be automatically configured.
Then click Next.
11. Click Finish.

Print Server configuration is now complete.
7
English
For detailed information regarding adding printers for Windows
98SE/ME/2000/XP/2003 Server/Vista, please refer to the User's Guide on the
Utility CD-ROM or TRENDnet's website at www.trendnet.com
13. Disconnect the RJ-45 cable and
unplug the power. Then plug the
power back in (TEW-P11G only).
12. Click OK.
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
register your product Online at: www.trendnet.com/register
Thank you for choosing TRENDnet

8
Troubleshooting
Q1.
A1.
Q2.
A2.
Q3.
A3.
Q4.
A4.
The Setup Wizard is unable to see my printer server. What should I do?
First, double check your hardware connections; make sure that the print
server is powered ON and is properly connected. Second, click Refresh. Third,
disable any software firewall programs (e.g. ZoneAlarm). If your computer is
running Windows XP or Vista, disable the built in firewall program. Fourth, unplug
the power to the print server, wait 15 seconds, then plug the power back in.
How do I add a printer to my computer?
Please refer to the User's Guide on the CD-ROM for instructions on adding a
printer.
I configured my print server to automatically receive an IP Address from a
DHCP server but I can't log in to the browser configuration for the print server.
Open the Setup Wizard (See 3. Configure the Print Server) to locate your print
server's IP Address. Then type in the IP address into your browser.
After I successfully configured the TEW-P11G to match my wireless network
settings, I can not connect to the print server.
First, verify that the wireless settings match your wireless network settings.
Second, make sure to disconnect the Ethernet cable from the print server and
verify that the WIRELESS LED is lit.
If you still encounter problems or have any questions regarding the TE100-P11/TEW-
P11G, please refer to the User's Guide included on the Utility CD-ROM or contact
TRENDnet's Technical Support Department.