TRENDnet TV-IP751WC User manual

TRENDnet User’s Guide
Cover Page

© Copyright 2011 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Table of Contents
i
Contents
Product Overview ...........................................................................1
Package Contents .......................................................................................................... 1
Features......................................................................................................................... 1
Product Hardware Features........................................................................................... 2
Application Diagram ...................................................................................................... 3
Installation Option Description*......................................................4
Wired Connection ..................................................................................................... 4
WPS Connection........................................................................................................ 4
TRENDnet Cloud Service..................................................................5
Image A (connecting using WPS) ................................................................................... 5
Image B (wired connection)........................................................................................... 5
Blue Mode ..................................................................................................................... 5
Green Mode................................................................................................................... 6
Red Mode ...................................................................................................................... 6
Install the Camera ...........................................................................7
Configure Wireless settings ......................................................................................... 11
Connect to your TV-IP751WC/TV-IP751WIC with a Mobile App......15
Mobile Apps, QR code Download Option.................................................................... 15
Configuration................................................................................18
Viewing Video .............................................................................................................. 18
Viewing Camera Settings ............................................................................................. 19
System..................................................................................................................... 19
Video ....................................................................................................................... 19
Audio ....................................................................................................................... 20
Wireless................................................................................................................... 20
Network .................................................................................................................. 20
Cloud Link................................................................................................................ 20
Active Users ............................................................................................................ 21
Configuring Camera Settings ....................................................................................... 21
System..................................................................................................................... 21
Video ....................................................................................................................... 22
Audio....................................................................................................................... 22
Wireless................................................................................................................... 22
Network .................................................................................................................. 23
Cloud Link Settings .................................................................................................. 24
User......................................................................................................................... 25
Date/Time ............................................................................................................... 25
Motion Detection.................................................................................................... 26
Upload..................................................................................................................... 26
E-mail ...................................................................................................................... 27
Day/Night Mode...................................................................................................... 28
Tools ............................................................................................................................ 29
FTP Server Test........................................................................................................ 29
E-mail Test............................................................................................................... 29
Restart..................................................................................................................... 30
Factory Reset .......................................................................................................... 30
Firmware Upgrade .................................................................................................. 30
Backup and Restore ................................................................................................ 31
How to setup/access the camera remotely.................................... 32
Technical Specifications ................................................................ 35
Troubleshooting ........................................................................... 39

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP751WC / TV-IP751WIC
1
Product Overview
TV-IP751WC TV-IP751WIC
Package Contents
In addition to your camera, the package includes:
Muti-Language Quick Installation Guide
CD-ROM (Utility, software & User’s Guide)
Network cable (1.5m / 5ft)
Power adapter (5V DC, 1.2A)
Camera mounting kit
If any package contents are missing or damaged, please contact the retail store, online
retailer, or reseller/distributor that the item was purchased.
Features
TV-IP751WC
The Wireless Cloud Camera, model TV-IP751WC, transmits real-time video over the
Internet. Wireless n technology provides unsurpassed wireless coverage and improved
streaming video quality. Add this camera to your wireless network at the touch of a
button with Wi-Fi Protected Setup (WPS).
Record 640 x 480 (VGA) video at up to 20 frames per second (fps). Manage up to 32
TRENDnet cameras with the included complimentary camera management software.
Advanced features include adjustable motion detection recording areas, email alerts,
scheduled recording sessions, one-way audio, an adjustable lens, and four times digital
zoom. A wall/ceiling mounting kit is included and the camera’s off white housing blends
into most environments.
TV-IP751WIC
The Wireless Day/Night Cloud Camera, model TV- IP751WIC, transmits real-time video
over the Internet. Record crisp video in complete darkness for distances of up to 7.5
meters. Wireless n technology provides unsurpassed wireless coverage and improved
streaming video quality. Add this camera to your wireless network at the touch of a
button with Wi-Fi Protected Setup (WPS).
Record 640 x 480 (VGA) video at up to 20 frames per second (fps). Manage up to 32
TRENDnet cameras with the included complimentary camera management software.
Advanced features include adjustable motion detection recording areas, email alerts,
scheduled recording sessions, one-way audio, an adjustable lens, and four times digital
zoom. A wall/ceiling mounting kit is included and the camera’s off white housing blends
into most environment.

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP751WC / TV-IP751WIC
2
Product Hardware Features
Rear Panel View
LAN Port –Connect Ethernet cables to your wired network devices.
Power Port –Connect the included power adapter from your camera to an
available power outlet.
Note: Use only the adapter that came with your camera.
Front Panel View
IR LED –Built-in 4 IR LED for night vision uses. (for TV-IP751WIC)
Light Sensor –Detects the light source to turn IR on or off.
Focus ring –turn to adjust the focus of the camera.
Microphone –Built-in microphone for audio can be turn on or off.
Power -This LED indicator is solid blue when your camera is powered on.
Otherwise if this LED indicator is off, there is no power to your camera.
Link –This LED indicator is blinking orange when there is connection/data to
your camera.
IR LED
Power port
Ethernet port
Light Sensor
Microphone
Camera Lens
Power/Link LED
Focus ring

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP751WC / TV-IP751WIC
3
Side Panel View
Reset Button –Use an item such as a paperclip to push and hold this button for
3 seconds and release to reset your camera to its factory defaults.
WPS (Wi-Fi Protected Setup) –Push and hold this button for 3 seconds to
activate WPS. The button LED is blinking green when WPS is activated.
Application Diagram
Reset
WPS

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP751WC/ TV-IP751WIC
4
Installation Option Description*
Wired Connection
1. Connect the Ethernet Cable
If you intend to use the network camera as a wired device, connect one end of
the included Ethernet cable into the Ethernet port on the rear panel of the
camera and connect the other end to an available port on your network. If you
prefer to use the camera on a wireless network, see below for instructions on
connecting the power adapter.
2. Attach the Power Supply
Attach the included power supply to the DC 5V 1.2A receptor on the rear panel
of the camera and then connect it to a wall outlet or power strip. A blue LED
will light up under the lens indicating that the camera has power.
WPS Connection
An alternative method of connecting your camera to your network is by using WPS. WPS
is a quick, simple and secure method of adding devices to a network. If you have a
router which supports WPS follow the steps below, otherwise, please use the wired
mode of setting up the camera.
1. Attach the Power Supply
2. Press the WPS button on your wireless device then press the WPS button on
the camera.
*The Install wizard CD inside the package box will guide you step-by-step of wired or
wireless options with the TRENDnet Cloud Service of installation; please refer to the
page 7.

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP751WC/ TV-IP751WIC
5
TRENDnet Cloud Service
Note: (Before beginning, make sure you are connected to the internet and the camera is
accessible to the web).
1. Take a look for a similar URL to this (11223344.cam.trendnetcloud.com) at the
label on the back of the camera.
2. Connect the power cable to the camera.
.
There are two methods to connect to the internet, wired and wireless. For wireless,
follow the instructions from Image A below. For wired, follow the instructions from
Image B below.
Image A (connecting using WPS)
.
Image B (wired connection)
3. Open your browser, type the URL listed at the back of your camera and hit
Enter to connect to the camera’s live stream. Please note: you can also use this
URL to connect to the camera from any location or computer.
There are three modes when connecting your TV-IP751WC/TV-IP751WIC to the
web. This is visible through the “cloud” at the top right side of the web interface.
Blue Mode
The Blue Mode indicates the camera is connecting directly to the internet or local
network. This mode offers configuration and management options.

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP751WC/ TV-IP751WIC
6
Green Mode
The Green Mode indicates the camera is connecting to media in a peer-to-peer fashion
to the internet or local network. This mode doesn’t offer configuration and
management options –only live streaming.
Red Mode
The Red Mode indicates the camera is connecting to the internet or local network
through a firewall. This mode doesn’t offer configuration and management options –
just live streaming for 180 seconds.
The firewall settings limits live streaming for each user.
The “red” notification at the bottom of the viewing area warns users of the limited time
Refresh this screen continuously if you wish to view your camera’s live stream.

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP751WC/ TV-IP751WIC
7
Install the Camera
Insert the included CD-ROM into your CD/DVD drive. The Install Wizard program will
run automatically.
Note: If the Install Wizard does not run, you may have autorun disabled on your
machine. In this case, browse to the CD drive and run InstallWizard.exe to begin the
installation wizard.
Begin by selecting Install Camera and follow the on-screen steps to continue the
installation.
1. This is TRENDnet’s Terms of Use. Click Agree to continue.
2. The next step references information on the camera itself. Go to your camera
and check the details at the back of the device. Click Next to continue, Back to
go to the previous screen or Home to return to the Main Menu.
3. The most important part of the setup process is the network connection type.
There are three options:
a. Connect camera to your wireless network using Wi-Fi Protected Setup
(WPS) button (Verify your router has a WPS button. If not, select the
next option).
b. Connect camera to your wireless network manually
c. Connect camera to your network using a network cable.

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP751WC/ TV-IP751WIC
8
4. The basic connection type is “C” using a network cable. Let’s begin the
installation process using the network cable connection first. Click this radio
button and click Next to continue, Back to go to the previous screen or Home
to return to the Main Menu.
5. Follow the instructions in the next screen to Power up the Camera. Click Next
to continue, Back to go to the previous screen or Home to return to the Main
Menu.
6. Connect one end of the network cable to your camera and the other end to
your router. Click Next to continue, Back to go to the previous screen or Home
to return to the Main Menu.

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP751WC/ TV-IP751WIC
9
7. The wizard searches the network for your camera.
8. If you only have one camera on your network, the wizard will automatically
select it (as shown below). Otherwise, if you have more than one camera, it
provides several options from the list. The wizard provides the Model Number
and MAC Address of the camera. If you do not see any of your camera(s) in the
wizard, click Retry to scan for the camera again. Click Next to continue, Back to
go to the previous screen or Home to return to the Main Menu.
9. Password Settings. Follow the instructions on the screen. The Default
username is admin. Click the Change Password checkbox to enter the new
password details. Click Next to continue, Back to go to the previous screen or
Home to return to the Main Menu.

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP751WC/ TV-IP751WIC
10
10. The wizard configures your parameters.
11. The initial setup is complete. The main feature is the Cloud Access accessibility
feature. Click the link(s) or icon below to create a shortcut on your desktop.
Also, below the icon is a warning. This warning is only shown when the internet
connection is inactive or the Cloud server cannot be found. Make sure the
internet connection is active, click Retry. When the Cloud server isn’t found,
the server may be busy or under maintenance. Under these circumstances,
click Retry later again. If there is no warning, click Next.
12. The mobile option allows the user to download the TRENDnet CloudView App
in either Apple or Google android format. To use this feature, the user must
have a QR Scanner App on their mobile device. This is also available from the
Apple App Store or Google’s Play store. Click Next to continue, or Home to go
to the main menu.
You are now ready to use your camera. Click Finish to exit.
Connecting to your TV-IP751WC/TV-IP751WIC with a Mobile App
Please refer to the page 15 for mobile apps download through the QR code option.

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP751WC/ TV-IP751WIC
11
Configure Wireless settings
Find the access point (AP) or wireless router you wish to connect to from the
Available AP drop down menu.
In most cases you should leave the Channel set to Auto as the AP will
determine the channel of operation.
Select the type of authentication and encryption required by the access point
and enter the Key required to connect.
Click Next to continue, Back to go to the previous screen or Home to return to the Main
Menu.
Please read the next steps carefully as it pertains to the WPS feature on your router and
camera.
1. Follow the instructions and click Next to continue. If you wish to go to the
previous screen, click Back or Home to return to the main menu.
2. The camera now searches for the settings you chose.
3. Once your wireless network is discovered, the wizard provides you with an
option to select the Available Wireless Network and also to provide a Wireless
Network Password. If you do not see your wireless network details, click the
Rescan link to scan the network again.

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP751WC/ TV-IP751WIC
12
4. The wizard searches for wireless Access Points.
5. Once the wizard has found your Access Point, you will be prompted to enter an
8-16 bit password depending on your router configuration. Click Next to
continue, Back to go to the previous screen or Home to return to the Main
Menu.
6. Next, you are prompted to disconnect your network cable from the
camera/router.

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP751WC/ TV-IP751WIC
13
7. Click Next to continue, Back to go to the previous screen or Home to return to
the Main Menu.
8. The wizard once again searches for the wireless device. If your settings are
incorrect an error message (similar to the one below) will appear.
Click the Retry radio button or the Re-enter Wireless Settings to re-configure
the wireless settings. Once you have configured the wireless network so that it
works with the camera, your camera will be detected and the same process as
with a wired network will be displayed.
Click Next to continue, Retryto find another camera, Back to go to the
previous screen or Home to return to the main menu.
9. The initial setup is complete. The main feature is the Cloud Access accessibility
feature. Click the link(s) or icon below to create a shortcut on your desktop.
Also, below the icon is a warning. This warning is only shown when the internet
connection is inactive or the Cloud server cannot be found. Make sure the
internet connection is active, click Retry. When the Cloud server isn’t found,
the server may be busy or under maintenance. Under these circumstances,
click Retry later again. If there is no warning, click Next.

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP751WC/ TV-IP751WIC
14
10. The mobile option allows the user to download the TRENDnet CloudView App
in either Apple or Google android format. To use this feature, the user must
have a QR Scanner App on their mobile device. This is also available from the
Apple App Store or Google’s Play store. The QR codes of Apple and Android
are presented on the last page of the autorun wizard.
Use the links to access the camera or QR codes on your desired mobile device. Click
Next to continue or Home to return to the main menu.
Click Finish to exit the wizard and start using your TRENDnet camera.
Please refer to the page 15 for mobile apps download through the QR code option.

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP751WC/ TV-IP751WIC
15
Connect to your TV-IP751WC/TV-IP751WIC with a
Mobile App
TRENDnet Cloud Services also offers mobile connectivity. Access the iPhone App by
going to the Apple™App Store and downloading “TRENDnet CloudView” App.
Alternatively, if you are using the Google™Android service, go to the Google Play™
Store and download the app from there. Currently, TRENDnet does not support
Blackberry™or the Windows™App stores.
Mobile Apps, QR code Download Option
The mobile option allows the user to download the TRENDnet CloudView App
in either Apple or Google android format. To use this feature, the user must
have a QR Scanner App on their mobile device. This is also available from the
Apple App Store or Google’s Play store. The QR codes of Apple and Android
are presented on the last page of the Install wizard.
Mobile Apps
Using your mobile device, in this example it is an Android phone, touch the Bar Code
scanning app on your phone (You need to download a bar code scan APP prior to QR
code scan). Hold it up to the QR Code on the wizard that reads, Android, and snap to
scan the image. The Bar Code app will read the QR Code and record it.
The app copies the QR link and provides a HTML link to the TRENDnet app. Click on the
link.
You will be directed to the Google Play Storefront to download the app.

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP751WC/ TV-IP751WIC
16
Download the app, install it and use the app on your mobile device to view the
TRENDnet camera.
The TRENDnet icon will appear on your android device screen.
Touch the icon to activate it.
Enter the settings and touch the check icon. You are now able to have a live view from
your camera.

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP751WC/ TV-IP751WIC
17
Here is Apple iTunes version
Scan the QR Code using one of iOS’s QR Code apps. The app automatically creates an
HTML link to the iTunes App Store. Link the link.
You are immediately directed to the iTunes App Store. Click the link to download.

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP751WC/ TV-IP751WIC
18
Configuration
After completing the Setup Wizard, you are ready to use your camera. The
camera’s built-in Web configuration utility is designed to allow you to easily access and
configure your TV-IP751WC and TV-IP751WIC camera. Open a web browser such as
Internet Explorer® and enter the IP address of your camera. To log in, use the
Username “admin” and the Password created in the Setup Wizard. If you did not create
a password, the default Password is admin. You will then be prompted to change the
default password, admin. After entering your password, click OK.
The home page for the TV-IP751WC and TV-IP751WIC appears.
Viewing Video
Click VIEW VIDEO | ACTIVEX or VIEW VIDEO | JAVA to begin viewing live video from
your camera.
VIEW VIDEO | ACTIVEX
Windows users who do not have Java installed can choose ActiveX mode to view video.
Internet Explorer will prompt you to install ActiveX when you click on the VIEW VIDEO |
ACTIVEX link. Mac users must use the Java mode to view video.