TRENDnet TV-IP430PI User manual

© Copyright 2015 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Table of Contents
i
Contents
Contents ............................................................................................... i
Product Overview ................................................................................ 2
Package Contents................................................................................................................2
Features ..............................................................................................................................2
Cables..................................................................................................................................3
Warnings: ............................................................................................................................3
Cautions: .............................................................................................................................3
Plan for Installation.............................................................................. 4
Setup Camera with CD.......................................................................... 4
Access Camera through the Web Browser ............................................ 7
System Management and Default Settings........................................................................7
Logging-in to the Camera....................................................................................................8
Basic Settings..................................................................................... 10
Live View ...........................................................................................................................10
Presets............................................................................................................................................. 11
Patrols ............................................................................................................................................. 12
Pattern............................................................................................................................................. 13
Playback ............................................................................................................................14
Log.....................................................................................................................................17
System...............................................................................................................................18
Advanced Settings.............................................................................. 18
System............................................................................................... 18
Device Settings ................................................................................................................................ 18
User Accounts.................................................................................................................................. 19
Time Settings................................................................................................................................... 20
Daylight Savings............................................................................................................................... 20
Live View Settings ............................................................................................................................21
Maintenance....................................................................................................................................22
Network..............................................................................................23
TCP/IP ..............................................................................................................................................23
Port ..................................................................................................................................................24
DDNS................................................................................................................................................24
PPPoE...............................................................................................................................................25
SNMP ...............................................................................................................................................25
802.1X..............................................................................................................................................26
IP Address Filter...............................................................................................................................27
QoS, Quality of Service ....................................................................................................................27
UPnP ................................................................................................................................................28
Video ..................................................................................................28
Video Format ...................................................................................................................................28
Audio ...............................................................................................................................................29
Display Settings................................................................................................................................30
Text Overlay.....................................................................................................................................34
Video Recording...............................................................................................................................35
Events.................................................................................................36
Motion Detection ............................................................................................................................36
Video Tamper ..................................................................................................................................38
Exception .........................................................................................................................................40
Snapshot ..........................................................................................................................................40
Email ................................................................................................................................................41
Alarm Input......................................................................................................................................42
Alarm Output...................................................................................................................................43
Storage ...............................................................................................44

© Copyright 2015 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Table of Contents
i
Storage Management...................................................................................................................... 44
Network Storage.............................................................................................................................. 44
FTP Server........................................................................................................................................ 45
PTZ (Pan/Tilt/Zoom)...........................................................................46
Basic ................................................................................................................................................ 46
Limit................................................................................................................................................. 47
Initial Position.................................................................................................................................. 48
Park Action ...................................................................................................................................... 48
Private Mask.................................................................................................................................... 49
Schedule Tasks................................................................................................................................. 49
Clear Config ..................................................................................................................................... 50
Restore Default Password ...................................................................51
Troubleshooting..................................................................................52

© Copyright 2015 TRENDnet. All Rights Reserved.
2
TRENDnet User’s Guide
TV-IP430PI
Product Overview
TV-IP430PI
Package Contents
TV-IP430PI
CD-ROM (Software & User’s Guide)
Multi-Language Quick Installation Guide
If any package contents are missing or damaged, please contact the retail store, online
retailer, or reseller/distributor that the item was purchased from.
Features
TRENDnet’s Outdoor 2 MP Full HD 1080p PoE IR Mini Speed Dome Network Camera,
model TV-IP430PI, offers 4x optical zoom, 30 meters (100 feet) night vision, an IP66
weather rating, and endless 360 degree PTZ functionality. Record 2 Megapixel HD
video (1920 x 1080) at 30 fps in a space saving H.264 compression format. Manage up
to 32 TRENDnet cameras with included complimentary software and mobile apps. A
separate mounting bracket is required—install with TRENDnet’s TV-HC400, TV-HW400,
TV-HP400, or TV-HN400.
2 Megapixel Full 1080p HD
Record 1920 x 1080 at 30 fps in the space saving H.264 compression format
Auto Patrol
Choose pre-defined or program auto patrol sequences with varying zoom levels
Storage
Record video to a Samba client or to a Micro SD card (up to 64GB sold separately)
Tamper Detection
Receive tamper detection still image via email
D-WDR
Improved image quality and autofocus in high contrast lighting environments with
Digital Wide Dynamic Range technology
Recording Schedule
Define a weekly recording schedule
IPv6
IPv6 support

© Copyright 2015 TRENDnet. All Rights Reserved.
3
TRENDnet User’s Guide
TV-IP430PI
ONVIF
ONVIF compliant
Complimentary Software
Complimentary pro-grade software to manage up to 32 TRENDnet cameras
Complimentary Apps
Live video to a mobile device with free iOS and Android™ apps
Cables
RED AC24V
YELLOW/GREEN
BLACK AC24V
BLUE/WHITE AUDIO_OUT
RED/WHITE AUDIO_IN
GREEN/WHITE AUDIO_GND
Warnings:
It is recommended to use the PoE+ injector or an IEEE 802.3at compliant PoE+
switch.
If the product does not work properly, please contact your dealer or the nearest
service center. Never attempt to disassemble the camera yourself. Disassembling
the product will void the warranty and may cause harm or injury.
The installation should be done by a qualified service person and should conform
to all construction and electric regulations and other local codes.
Cautions:
Make sure the power supply voltage is correct before using the camera.
Do not drop the camera or subject to physical shock.
Do not touch sensor modules with fingers. If cleaning is necessary, use a clean
cloth with a bit of ethanol and wipe it gently. If the camera will not be used for an
extended period of time, put on the lens cap to protect the sensor from dirt.
Do not aim the camera lens at the strong light such as the Sun or an incandescent
lamp. Strong light can damage the camera sensor.
The sensor may be burned out by a laser beam. When any laser equipment is
being used, make sure that the surface of the sensor will not be exposed to the
laser beam.
Do not place the camera in extremely hot, cold temperatures (the operating
temperature should be between -30°C to 65°C), dusty or damp environment, and
do not expose it to high electromagnetic radiation.
To avoid heat accumulation, good ventilation is required for a proper operating
environment.
While shipping, the camera should be packed in its original packing.
Use water proof tape to cover all the wires, cables which will be exposed outdoor
after the camera installation.
Connectors for AC
power adapter
(Not required when PoE
injector is included)
Audio Line in, line out,
and grounding wires
Network cable
connection

© Copyright 2015 TRENDnet. All Rights Reserved.
4
TRENDnet User’s Guide
TV-IP430PI
There are a number of factors involved in successful camera installation. Follow the
suggested installation steps and go through the check lists. This guide will help you to
make your camera installation smooth and easy.
Plan for installation location
Setup Camera with CD
Selecting the appropriate mounting accessories, see Mounting Guide
Plan for Installation
Viewing angle
The camera is a vari-focal camera with a wide viewing range that provides non-
distorted and detailed images. Choose the location where has good angle to
shoot the image you expect to see. The motion detection area should also be
considered when installing the camera.
Weather Conditions
The camera is an outdoor dome camera, which fits most installations indoor
and outdoor. The camera can work under a wide range of weather conditions.
For severe weather conditions. Using the camera in milder weather conditions
will help extend the camera’s life and preserve the quality of the camera image.
Moisture: Avoid damp or moist environments whenever you can. The camera
is an IP66 grade water proof camera, and it will work in moist environments.
However, rain may affect the picture quality, especially at night, water may
reflect the light from the infra-red illumination and degrade picture quality.
Temperature: Camera works within a specified temperature range. Areas with
severe temperatures should be avoided when installing the camera. It’s
recommended that you use an enclosure with a heater and blower if you plan
on using this camera outside of the specified temperature range.
Sunlight: Avoid direct sun light exposure. Direct sun light will damage the
image sensor. If sunlight is necessary for your viewing purposes, provide
protection for the image sensor.
Lighting: Consider installing your camera faces the same direction of the light
sources. Shooting images with top-down position outdoor or next to the
existing light source are good choices. Avoid the light source if it creates a
shade that darkens the viewing area.
Setup Camera with CD
1. Insert the Installation CD-ROM into your computer’s CD-ROM drive to initiate
the Auto-Run program. Choose your preferred language and then click the
Install Camera.(mounting accessories are not included)

© Copyright 2015 TRENDnet. All Rights Reserved.
5
TRENDnet User’s Guide
TV-IP430PI
2. Write down the MAC Address of the camera.
3. Connect the power/network cable
4. Wait while the utility is searches for the camera.
5. The installation wizard will list cameras found on your network. If only one
camera is found, it will be selected by default. If you have more than one
camera on the network, please choose the camera you wish to set up by
identifying its MAC address. Select the camera and then click Next.

© Copyright 2015 TRENDnet. All Rights Reserved.
6
TRENDnet User’s Guide
TV-IP430PI
6. Select the DHCP option to assign IP address dynamically, or select Fixed IP to
assign the camera an IP address, then click Next.
7. If you select Fixed IP, enter the IP address, subnet mask, default gateway, and
DNS server address. Please make sure the IP address you are setting on the
camera is in the same network of the computer that you are using. Click Next.
8. Enter a new password. The default password is admin. You are required to
change the password from the default setting to prevent unauthorized access.
Enter the default password: admin and enter the new passwords for a brand
new installation*. The password must be between 8 and 16 characters.
(Alphanumeric: a-z, A-Z, 0-9, !, @, #, $).
*This camera installation wizard is also good for finding the camera if it was setup with
DHCP. The IP address may change dynamically with the DHCP setting. If you want to
access your camera again and you don’t know the IP address, you can run this camera
installation wizard again. If you have already setup the password and want to keep the
password unchanged, un-check the Change Password box and click next to get the link
to access your camera.)
** Please save the password for future references. This device does not have a
hardware reset function for temper proof purpose.

© Copyright 2015 TRENDnet. All Rights Reserved.
7
TRENDnet User’s Guide
TV-IP430PI
9. Click here to access to the camera’s web page or click Next for mobile app
installation.
10. Click Finish to exit the program or click Home to return to the main screen. You
can also download a free app to view video on your mobile devices. Scan the
QR code to find and install the TRENDnetVIEW app.
Access Camera through the Web Browser
System Management and Default Settings
It is recommended that you install your camera with the CD that comes with the
package and use accompanying TRENDnetVIEW Pro software for Windows computers. If
you do not have the CD with you, please go to http://www.trendnet.com/support and
enter the model number and download the software.
If you didn’t go through the CD installation wizard or you have reset the camera, your
camera has following settings:
Management IP :
192.168.10.30 or a dynamic assigned IP
address if you connect the camera to your
existing network
Administrator name :
admin
Administrator password :
admin
If you want to access your camera directly instead of using software, you can follow the
steps specified in this chapter to login to your camera. A web browser plug-in must be
installed to view live image.

© Copyright 2015 TRENDnet. All Rights Reserved.
8
TRENDnet User’s Guide
TV-IP430PI
Logging-in to the Camera
1. Open the web browser on your computer. In the address bar, enter the IP
address you setup through the setup CD or 192.168.10.30. (If you have a DHCP
server on your network, the IP address will be assigned dynamically. For
example, if you have a home gateway on your network and you plug-in the
camera on the same network, you can find the camera’s IP address on your
home gateway.), and then press Enter.
2. Enter the user name, admin, and the password you setup through the setup CD
or the default password, admin, and then click OK.
If the camera was not setup through the CD and you are accessing it the first
time, you will be prompted to change password automatically.
3. The camera management page will detect if you installed the camera video
streaming plug-in or not. Click the link to download the plug-in from the
camera.
Permission request depends on the Internet security settings of your computer.
Click Run to install the plug-in.
Note: for Mac systems, the plug-in file is stored on the CD or you can download the
latest version from
http://www.trendnet.com/downloads/camera/mac/WebComponents.zip

© Copyright 2015 TRENDnet. All Rights Reserved.
9
TRENDnet User’s Guide
TV-IP430PI
4. Click Next to install the plug-in.
5. Click Finish to finish the installation.
6. Open the browser and login again. Allow the plug-in from TRENDnet if
prompted. The Live View page will show and begin streaming video.

© Copyright 2015 TRENDnet. All Rights Reserved.
10
TRENDnet User’s Guide
TV-IP430PI
Basic Settings
Live View
After you log-in into the camera management page, you’ll see the Live View page.
Multi-Language
Change your preferred language anytime
Snapshot
Click this icon to take a video snapshot
Recording
Click once to start recording. Click it again to stop
recording. The status bar will indicate if it is in recording
state or not
Zoom
Click once to enable zoom. Then, click and drag the area
on the picture to zoom in. Click once on picture for 100%
zoom. Click the icon again to disable zoom. The zoom
function works in full screen mode as well
Video Stream
The camera has two video streams: H.264 and MJPEG.
Switch to view the different video streams by clicking
this icon
3D Zoom
Click the position of the live video, the corresponding
position will be moved to the center of the live feed.
Click and hold the mouse for a desire portion of the live
image, then that position will be moved to the center of
the live feed
2-way Audio
Click to enable 2-way audio
Full Screen Mode
Double click the picture to view in full screen mode.
Double click again or press escape key on your keyboard
to exit full screen mode
Status Bar
The status bar shows the status you are at, including
enabled the zoom, recording video, and successfully
taking a snapshot
The icon expands the PTZ control panel
Pan / Tilt / Zoom control panel
Zoom in / out
Focus close / far
Iris open / close
Speed of pan/tile movement

© Copyright 2015 TRENDnet. All Rights Reserved.
11
TRENDnet User’s Guide
TV-IP430PI
Presets
Use the presets panel to move to previously saved
locations
Presets
Configure a Preset position
A preset is a predefined image position. For the defined preset, you can click the Call
button to quickly view the desired image position.
1. In the PTZ control panel, select a preset number from the preset list.
2. Use the PTZ control buttons to move the lens to the desired position.
• Pan the speed dome to the right or left.
• Tilt the speed dome up or down.
• Zoom in or out.
• Refocus the lens.
3. Click to finish the setting of the current preset.
4. You can click to delete the preset. You can configure up to 256 presets.
Calling a Preset position
In the PTZ control panel, select a defined preset from the list and click to call the
preset.
The following presets are predefined with special commands. You can only call them
but not configure them. For instance, preset 99 is “Start auto scan”. If you call preset
99, the speed dome starts auto scan function.
Special
Preset
Function
Special
Preset
Function
33
Auto flip
93
Set limit stops manually
34
Back to initial position
94
Remote reboot
35
Call patrol 1
96
Stop a scan
36
Call patrol 2
97
Start random scan
37
Call patrol 3
98
Start frame scan
38
Call patrol 4
99
Start auto scan
39
IR cut filter in
100
Start tilt scan
40
IR cut filter out
101
Start panorama scan
41
Call pattern 1
102
Call patrol 5
42
Call pattern 2
103
Call patrol 6
43
Call pattern 3
104
Call patrol 7

© Copyright 2015 TRENDnet. All Rights Reserved.
12
TRENDnet User’s Guide
TV-IP430PI
44
Call pattern 4
105
Call patrol 8
45
One-touch patrol
92
Start to set limit stops
Note: When you call preset 45 (one-touch patrol), the speed dome patrols from
presets 1 to 32. Before you enable this function, please set presets 1 to 32 first.
Patrols
A patrol is a memorized series of preset functions. It can be configured and called on the
patrol settings interface. There are up to 8 patrol available for customization. A patrol
can be configured with 32 presets.
Configure a Patrol route
1. In the PTZ control panel, click to enter the patrol settings interface.
2. Select a patrol number from .
Click to add a preset to a patrol path.
3. Configure the preset number, patrol time and patrol speed.
Name
Description
Patrol
Time
This is the duration the camera stays on one patrol point. The speed
dome moves to another patrol point after the patrol time.
Patrol
Speed
This is the speed that the camera moves in between patrol points.

© Copyright 2015 TRENDnet. All Rights Reserved.
13
TRENDnet User’s Guide
TV-IP430PI
4. Click to save a preset into the patrol.
5. Repeat the steps from 3 to 5 to add more presets.
6. Click to save all the patrol settings.
Calling a Patrol route
In the PTZ control panel, select a defined patrol from and click
to call the patrol.
Buttons on the Patrol interface:
Buttons
Description
Save a patrol
Call a patrol
Stop a patrol
Add a preset to a patrol path
Modify a preset
Delete a preset
Delete all the presets in the selected patrol path
Pattern
A pattern is a memorized series of pan, tilt, zoom, and preset functions. A pattern can
be called in the pattern settings interface. There are up to 4 patterns available for
customization.
Configure a Pattern
1. In the PTZ control panel, click to enter the pattern settings interface.
2. Select a pattern number from the list as shown in Error! Reference source not
found..
3. Click to enable recording the panning, tilting and zooming actions.
4. Use the PTZ control buttons to move the lens to the desired position after the
information of PROGRAM PATTERN REMAINNING MENORY (%).
• Pan the speed dome to the right or left.
• Tilt the speed dome up or down.
• Zoom in or out.
• Refocus the lens.

© Copyright 2015 TRENDnet. All Rights Reserved.
14
TRENDnet User’s Guide
TV-IP430PI
5. Click to save the pattern settings.
Buttons on the Patterns interface:
Buttons
Description
Start recording a pattern.
Stop recording a pattern.
Call the current pattern.
Stop the current pattern.
Delete the current pattern.
These 4 patterns can be operated separately and with no priority level.
When configuring and calling the pattern, proportional pan is valid; the limit
stops and auto flip will be invalid; and the 3D positioning operation is not
supported.
Playback
You can playback the video recording on the network storage and download the video
clip and snapshots to your local computer.

© Copyright 2015 TRENDnet. All Rights Reserved.
15
TRENDnet User’s Guide
TV-IP430PI
Search for video recordings
Click the date selection, and then choose a date for the date range of your recording.
Click Search to start searching.
Time line
There is a playback head in the center of the time line represented by a yellow vertical
line. To look for a specific video recording, move the time line by clicking and dragging it.
If the recording is short, zoom in by clicking button. Click to zoom out the
time scale. If you know the exact time of the day you are looking for, click then
enter the time you want to playback.
Different types of recordings are identified differently. The scheduled recordings are
marked in blue, and the recordings triggered by motion detection are marked in red.
Click and drag the time line to move your time manually
Click this button to zoom in the scale
Click this button to zoom out of the scale
Click this button to specify a specific time of the day.
then click to confirm selection and then click Xto close
this dialog box.
Play video
Use playback controls to play back the video recordings.
Click this button to play the video
Click this button to pause video playback
Click this button to stop playback
Click this button to increase playback speed*
Click this button to decrease playback speed*
Click to playback video frame by frame. Click again for the next
frame.
*There are 5 steps of playback speeds. You can choose from ¼, ½ , 1,
2, and 4 times of original speed.

© Copyright 2015 TRENDnet. All Rights Reserved.
16
TRENDnet User’s Guide
TV-IP430PI
Take Images from a video playback
You can take snapshots from playback video or make new video clips from the video you
are playing back.
Click this button to enable zoom. Then click and drag on the video to
define the area you want to zoom in. Click again to get back to 100%
zoom.
Double click to show video in full screen and press ESC on keyboard
to exit full screen mode
Click this button to disable zoom
Click this button to take a snapshot of current playback
Click this button to start clipping a video from playback
Click this button to stop clipping a video from playback
Download sections of a video
To save complete video sections or snapshots, you can download the files directly.
Click this button to download video sections

© Copyright 2015 TRENDnet. All Rights Reserved.
17
TRENDnet User’s Guide
TV-IP430PI
Download snapshots
Click this button to download snapshots
Select the type of event that triggered the snapshots. Choose the Start Time and End
Time. Then, click Search to find the snapshot list. Check the time of the snapshot, and
then select the snapshots you want to download, then click Download.
Note: Where can I find saved files?
Videos and snapshots captured from Playback will save to your computer.
Log
The log of the TV-IP430PI will be saved on the network storage. You can search the
relevant records and save to your local computer.
Search for logs
Click the type of log and then the Start Time and End Time. Click Search to start
searching.
Click First Page, Prev Page, Next Page, and Last Page to show the logs. Click Save Log to
save the logs to your computer.

© Copyright 2015 TRENDnet. All Rights Reserved.
18
TRENDnet User’s Guide
TV-IP430PI
System
System Information page shows the camera basic information. Click System then click
System Info to show the page.
Basic Information
Device Name:
User defined device name
Firmware Version:
Firmware Version
MAC Address:
MAC address of the camera
System Time:
Display the system time
Network Information
IP Address:
IP address of the camera
Subnet Mask:
Network range of IP address
Default Gateway:
Gateway for the camera
Primary DNS:
Primary DNS server address
Secondary DNS:
Secondary DNS server address
Advanced Settings
System
Device Settings
Setup your camera name and location for easy identification. This camera name will also
be recognized by other network camera software as the name of this camera.
OSD, On Screen Display, the camera name is setting up here as well.
Names
Camera Name:
Name of the camera. The camera name setup here can
be discovered by other network camera software and
OSD, On Screen Display. The default is the camera’s