TRENDnet TV-IP343PI User manual

TRENDnet User’s Guide
Cover Page

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Table of Contents
i
Contents
Product Overview .................................................................................. 1
Package Contents .............................................................................................................1
Features............................................................................................................................1
Product Hardware Features .............................................................................................2
Installation ............................................................................................3
Hardware Installation .......................................................................................................3
Camera Installation ..........................................................................................................4
Configuration......................................................................................... 7
Viewing Camera Basic Function .......................................................................................7
Configuring the Camera Setting .......................................................................................9
SYSTEM...........................................................................................................................10
NETWORK.......................................................................................................................12
AUDIO/VIDEO SETTING ..................................................................................................23
EVENT CONFIGURATION ................................................................................................28
Logout.............................................................................................................................33
How to Access the IP camera via IP Installer ......................................... 34
Troubleshooting .................................................................................. 35

© Copyright 2014 TRENDnet. All Rights Reserved.
1
TRENDnet User’s Guide
TV-IP343PI
Product Overview
TV-IP343PI
Package Contents
TV-IP343PI
Multi-Language Quick Installation Guide
CD-ROM (Utility, Software & User's guide)
Power adapter (12V DC. 1A) (1.5M / 5 ft.)
Network cable (1.5 M/ 5 ft.)
RJ-45 coupler
Camera Mounting hardware
Features
The Outdoor 2MP Full HD PoE Day/Night Network Camera, model TV-IP343PI, offers 25
meters ( 82 ft.) night vision, an IP66 weather rating, tamper detection, and 3.5x manual
optical zoom for installation flexibility. Record full 1080p HD video (1920 x 1080) at 30
fps in a space saving H.264 compression format. Manage up to 32 TRENDnet cameras
with included complimentary software and mobile apps.
Resolution
Record 2 Megapixel Full 1080p HD, 1920 x 1080 at 30 fps, in the space saving H.264
compression format
Multi-Language Interface
Support for English, French, Spanish, German, and Russian
Time and Text Stamp
Enable time and additional identifying text stamp overlays
IPv6
IPv6 support
ONVIF
ONVIF v2.20 and v1.01 compliant
Dynamic DNS Support
Support for dyn.com, no-ip.com, and iptecno.com
Samba Support
Record video to a defined network storage device
Tamper Detection

© Copyright 2014 TRENDnet. All Rights Reserved.
2
TRENDnet User’s Guide
TV-IP343PI
Receive tamper detection video clips via email, ftp, or save to network storage device or
Micro-SD card
D-WDR
Improved image quality in high contrast light environments with Digital Wide Dynamic
Range technology
Motion Detection
Create up to 3 motion detection windows with separate sensitivity settings and event
triggers
Privacy Masks
Create up to three privacy masks to conceal sensitive areas
Product Hardware Features
Camera Overview
Shield: It is used to protect the camera for the inclement weather.
IR Lens: IR lens for the camera.
Camera Stand: the mounting stand to hold the camera.
Shield
IR Lens
Camera Stand

© Copyright 2014 TRENDnet. All Rights Reserved.
3
TRENDnet User’s Guide
TV-IP343PI
Camera Connectors
Power Connector: Connects the power adapter to supply power to the camera
if using non-PoE connection
BNC Video Out: Connect a CRT monitor or handheld monitor.
Microphone In: Connects an external microphone to receive the on-the-spot
sound where the camera is installed.
Ethernet/PoE Port: Plugs the network cable to connect to your local area
network (LAN). If you are using the PoE, you must have the network cable
connect to your PoE switch or PoE Injector.
GPIO Port: Connect external device. Please refer to I/O setting paragraph. It's
also used for IP camera reset. Please refer to Factory Default paragraph.
Speaker Out: Connects an external audio device (such as the active speaker) to
deliver sound via the camera.
Installation
Hardware Installation
Viewing Angle
Choose the location where has good angle to shoot the image you expect to see. The
motion detection area should also be considered when installing the camera.
Bracket Installation
Turn and lock the bracket into the mounting hole of IP camera. Use screws to fix the
bracket to ceiling or wall, and turn the knob tightly to fix the angle of camera.
Vari-Focal Lens
The camera equipped with external vari-focus lens control. Using flathead screwdriver
or paper clip to adjust zoom/focus button.
Power
Connector
Speaker
Out
Microphone
In
GPIO
Port
Ethernet /PoE
Port
BNC
Video Out

© Copyright 2014 TRENDnet. All Rights Reserved.
4
TRENDnet User’s Guide
TV-IP343PI
LED Indicator
The green LED will be flash when power on the camera and if there is the data
transmission.
Waterproofing
The camera is designed featuring waterproof. However, you need to protect the cable
connectors from water soaking. For example, you can tape the junction points of the
connectors while you connect the cables or purchase a weatherproof cable/power cord
protector.
SD Card Slot
After installed a Micro SD Card, please ensure the cover was screw tightly to protect
water soaking.
Camera Installation
1. Insert the Installation CD-ROM into your computer’s CD-ROM drive to initiate the
Auto-Run program. Click the Install Camera.
2. Write down the MAC ID of the camera.
Power On
LED

© Copyright 2014 TRENDnet. All Rights Reserved.
5
TRENDnet User’s Guide
TV-IP343PI
3. Plug in and connect the power adapter to the camera. If you are using the PoE to
supply power to the camera, please skip to the next step. Click Next when you are
done.
4. Connect a network cable to the camera’s network port and then to your router. If
you are using PoE, please ensure the cable is connected to a PoE switch or PoE
injector.
5. Wait while camera is searching.
6. The founded cameras will show on the screen. The camera already selected by
default if you have only one camera installed. If you have more than one camera in
the same Network, you will need to identify the camera by the MAC ID. Click Next.

© Copyright 2014 TRENDnet. All Rights Reserved.
6
TRENDnet User’s Guide
TV-IP343PI
7. Select "DHCP" option to assign an IP by DHCP server or Select "Fixed IP" to set IP
address manually. Click Next.
8. If you select "Fixed IP", fill out the IP address, subnet mask, default gateway, DNS
server. Please ensure that the IP address of the camera and the computer must
within the same network. Click Next.
9. Type in the Password. The default password is “admin”. You must change the
default password of the camera. Enter the default password: admin and enter the
new password. The password must be between 8 and 32 characters.
(Alphanumeric: a-z, A-Z, 0-9), and entering the password two to confirm password.
10. Click the hyperlink to access to the camera’s web page or click Next. It is
recommended that you access the IP camera now if it was using a DHCP
connection.

© Copyright 2014 TRENDnet. All Rights Reserved.
7
TRENDnet User’s Guide
TV-IP343PI
11. Click Finish to exit the program or click Home to return to the main screen.
This device also supports the Mobile App. Using your mobile device to scan the QR
code to install the App.
Configuration
Viewing Camera Basic Function
Open the Web browser on your computer (example showed in this User’s Guide is
based on the Internet Explorer). In the Address bar, type the IP address you got from
"Camera Installation" chapter or found by IP Installer, and then press [Enter].
When the login window appears, enter the User name (admin) and Password and press
OK to access to the main screen of the camera’s Web Configuration.
Note: if you are initially access to the camera, you will be prompted to install a new
plug-in for the camera. Permission request depends on the Internet security settings of
your computer. Click Allow and Install to process.

© Copyright 2014 TRENDnet. All Rights Reserved.
8
TRENDnet User’s Guide
TV-IP343PI
After you login into the live screen of the camera, the main page will appear as below:
The live screen of the IP camera configuration provides you with many useful
information and functions, including:
SETUP : Click the button to configure the camera.
SNAPSHOT: Click the button to take a snapshot. The snapshot will pop up another
window for your review first. Right click the mouse to save the snapshot at the
desire destination.
System Information: It shows current system Date, Time, Video Resolution, and
Video Refreshing Rate.
Digital Zoom: The drop down menu has 3 images size available, 1/2x, 1x and 2x. The
default is 1/2x.
Streaming Profile: Use the drop down menu to select Streaming 1 & Streaming 2
video. (If the streaming 2 setting is closed on “AUDIO/VIDEO SETTING >> Video”,
this option will not appear)
Speaker/Microphone: Click the "Mic" to speak out through the camera. Click the
“Speaker” to receive the on-side sound and voice from the camera.
Online Visitor: It shows how many people connect to this IP camera.
Relay On: Click the Relay out "ON" to trigger the relay output for testing. click "Off"
to stop triggering. To switch between these two types of relay out, please refer to
Event Configuration >> GPIO Setting session for detail.
Logout: Click to logout the camera. Please note: Closing the browser does not
logout the camera. It will remain in the same session. If camera in the idle time for
3 minutes, it will automatic logout the session.
One the live view video, right click the mouse for the additional menu options.
Snapshot: Save a JPEG picture
Record Start: Record the video in the local PC. It will ask you where to save the
video. To stop recording, right-click the mouse again. Select “Record Stop”. The
video format is AVI. Use Microsoft Media Player to play the recorded file.
Mute: Turn off the audio. Click again to turn on it.
The "mute" button does not affect the playback recording video. As long as the "2-
Way Audio" option in the audio setting is enabled, all the audio will be recorded
into the playback video even you click "mute" in the live page.
Full Screen: Full-screen mode.









