TRENDnet TEW-652BRU User manual

300Mbps Wireless N Home Router with USB Port
TEW-652BRU
1.01
ŸQuick Installation Guide (1)

Minimum Requirements
USB Port Software Utility Requirements
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
TEW-652BRU
Multi-Language Quick Installation Guide
CD-ROM (Utility and User's Guide)
Network cable (1.5 m / 5 ft.)
Power adapter (5V DC, 2A)
Ÿ
Ÿ
Ÿ
Computer with an Ethernet port and Web browser
Broadband Internet
Installed modem
Package Contents
1. Before You Start
1
Supported Operating
Systems CPU Memory
Windows 7 (32/64-bit)
Windows Vista (32/64-bit)
Windows XP (32/64-bit)
1GHz or above
800MHz or above
300MHz or above
1GB RAM or above
512MB RAM or above
256MB RAM or above
Mac OS X (10.6)
Mac OS X (10.7)
1.06GHz or above
1.06GHz or above
1GB RAM or above
2GB RAM or above
Mac OS X (10.5) 867MHz or above 512MB RAM or above
Mac OS X (10.4) 333MHz or above 256MB RAM or above

2
2. Installation
1. Verify that you have an Internet connection.
2. Power down your modem.
3. Disconnect the network cable from your modem and your computer.
4. Connect your modem to the TEW-652BRU's WAN port.
5. Connect your computer to one of the TEW-652BRU's LAN ports.
6. Connect the power adapter to the TEW-652BRU and then to a power outlet. Push the power button
to the “On” position.
7. Power on your modem. Wait until the LEDs indicate that modem is fully booted up. For more
information on your modem's LEDs, please consult with your modem's User's Guide.
8. Verify that the status LED indicators on the front of the router to confirm that the device is fully
functional (Power is solid green, Status is blinking green, WAN and WLAN (Wireless) are solid
green, and the LAN port for which your computer is connected is solid green).
4
6
8
5
6
7
WAN

3
9. Open your web browser, type
http://192.168.10.1 in the Address bar, and
then press Enter.
10. Enter the User Name and Password and
then click OK. By default:
User Name: admin
Password: admin
Note: User Name and Password are case
sensitive.
11. The Wizard will automatically appear. If the
Wizard does not automatically appear, click
the Wizard button on the bottom left side of
your screen.
13. Open up your browser and enter in a URL
(e.g. www.trendnet.com) to verify that you
have Internet connection.
Note: For instructions on using your USB
device with the TEW-652BRU, please refer
to the User's Guide on the provided
CD-ROM.
12. Follow the setup Wizard's instructions and
then click Restart.
Note:
ŸTo protect your network from
unauthorized access it is recommended
to enable wireless encryption. Please
refer to the User's Guide on the CD-ROM
for information on setting up encryption.
ŸOnce encryption is enabled on the
router, make sure your encryption key is
in a safe location. The router now
prompts users to input the encryption key
when connecting for the first time.
Wireless router installation is now complete
For detailed information regarding the TEW-652BRU’s configuration and advanced settings, please refer to the
User's Guide included on the CD-ROM, or TRENDnet's website at http://www.trendnet.com.

TRENDnet
20675 Manhattan Place
Torrance, CA 90501. USA
Copyright ©2011. All Rights Reserved. TRENDnet.