TRENDnet TEW-818DRU User manual

TRENDnet User’s Guide Cover Page

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide Table of contents
2
Table of Contents
Table of Contents............................................................................2
Product Overview ...........................................................................4
Package Contents .......................................................................................................... 4
Features ......................................................................................................................... 4
Product Hardware Features........................................................................................... 5
Application Diagram ...................................................................................................... 7
Router Setup...................................................................................7
Creating a Home Network ............................................................................................. 7
Router Installation ......................................................................................................... 8
Connect additional wired devices to your network..................................................... 12
Wireless Networking and Security .................................................12
How to choose the type of security for your wireless network .................................. 12
Secure your wireless network ..................................................................................... 13
Connect wireless devices to your router ..................................................................... 15
Connect wireless devices using WPS ........................................................................... 15
Basic .............................................................................................17
Access your router management page........................................................................ 17
Network Status ............................................................................................................ 17
Wireless settings.......................................................................................................... 18
Guest Network............................................................................................................. 19
Steps to improve wireless connectivity ....................................................................... 21
Parental Control........................................................................................................... 21
Doman/URL Filters............................................................................................. 22
IP Filters (LAN Client Filters) .............................................................................. 22
MAC Address Filters........................................................................................... 22
ADVANCED ...................................................................................23
Change your router IP address.................................................................................... 23
Set up the DHCP server on your router ....................................................................... 24
Set up DHCP reservation ............................................................................................. 24
Manually configure your Internet connection ............................................................ 25
Clone a MAC address................................................................................................... 25
Add static routes to your router.................................................................................. 26
IPv6 Internet Connection Settings............................................................................... 27
Prioritize traffic using QoS (Quality of Service) ........................................................... 28
Advanced wireless settings ......................................................................................... 29
Multiple SSID ..................................................................................................... 29
Wireless bridging using WDS (Wireless Distribution System) ........................... 31
Additional wireless settings............................................................................... 32
Set your router date and time..................................................................................... 33
Create schedules ......................................................................................................... 33
Access Control ............................................................................................................. 34
Open a device on your network to the Internet.......................................................... 35
DMZ ................................................................................................................... 35
Virtual Server ..................................................................................................... 35
Special Applications........................................................................................... 36
Gaming............................................................................................................... 37
Enable/disable Application Layer Gateways (ALG)...................................................... 38
Enable/disable UPnP on your router........................................................................... 39
Using External USB Storage ........................................................... 39
Samba Network File Server ......................................................................................... 39
FTP (File Transfer Protocol) Server .............................................................................. 40
Properly Eject USB device............................................................................................ 41
Print Share Utility Installation ....................................................... 42
Windows Installation................................................................................................... 42
MAC OS X Installation.................................................................................................. 43

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide Table of contents
3
Launching the Utility.................................................................................................... 44
Utility Main Window.................................................................................................... 44
Configure Server .......................................................................................................... 45
Connect........................................................................................................................ 45
Disconnect ................................................................................................................... 45
Sending a Request to Connect..................................................................................... 46
Connect to a Printer..................................................................................................... 47
Auto-Connect Printer................................................................................................... 48
Connect to a Scanner................................................................................................... 48
Router Maintenance & Monitoring................................................49
Change your router login password ............................................................................ 49
Change your device name ........................................................................................... 49
Change your device URL .............................................................................................. 50
Identify your network on the Internet......................................................................... 50
Allow remote access to your router management page ............................................. 51
Reset your router to factory defaults .......................................................................... 51
Router Default Settings ............................................................................................... 52
Backup and restore your router configuration settings .............................................. 52
Upgrade your router firmware .................................................................................... 53
Reboot your router...................................................................................................... 54
Allow/deny ping requests to your router from the Internet....................................... 54
Check the router system information ......................................................................... 55
Router Management Page Structure ............................................. 59
Technical Specifications ................................................................ 60
Troubleshooting ........................................................................... 62
Appendix ...................................................................................... 63

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-818DRU
4
Product Overview
TEW-818DRU
Package Contents
In addition to your router, the package includes:
•CD-ROM (Utility and User’s Guide)
•Multi-Language Quick Installation Guide
•Network cable Ethernet Cable (1.5m / 5ft.)
•Power Adapter (12V, 2A)
If any package contents are missing or damaged, please contact the retail store, online
retailer, or reseller/distributor from which the product was purchased.
Features
TRENDnet’s AC1900 Dual Band Wireless Router, model TEW-818DRU, is an
extreme performance wireless router. It creates two concurrent wireless
networks—a 1.3 Gigabit Wireless AC network and a 600 Mbps Wireless N
network to connect common wireless devices. Use the high speed USB 3.0 port
and Gigabit Ethernet ports to further expand your network.
Ease of Use
Easy Setup
Get up and running in minutes with the intuitive guided setup
One Touch Connection
Securely connect to the router at the touch of the Wi-Fi Protected Setup (WPS)
button
USB Share Ports
Plug in a flash or storage drive into the 5 Gbps USB 3.0 port or the USB 2.0 port
Multi Language
Multi Language Interface: English, Spanish, French, German, and Russian
Security
Encrypted Wireless
For your security the router arrives pre-encrypted with its own unique password
Guest Network
Create a secure, isolated network for guest internet access only
Parental Controls
Control access to specific websites or types of content
Performance
Next Generation Wireless AC
802.11ac provides uninterrupted HD video streaming in a busy connected home
Simultaneous Dual Band
High speed 1300 Mbps Wireless AC band + 600 Mbps Wireless N

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-818DRU
5
Gigabit Ports
Gigabit ports extend high performance wired connections
Wireless Coverage
Whole home wireless coverage for average size homes
Backward Compatible
Compatible with legacy wireless devices
Energy Savings
Embedded GREENnet technology reduces power consumption by up to 50%
Targeted Beamforming
Increased real-time performance by directing stronger wireless to your specific
location
*Maximum wireless signal rates are referenced from IEEE 802.11 theoretical
specifications. Actual data throughput and coverage will vary depending on
interference, network traffic, building materials and other conditions. 802.11n 2.4 GHz
TurboQAM speeds requires clients with TurboQAM support.
** Printer Control Center utility installation required for each computer in order to
access the printer
Product Hardware Features
Rear View
•USB 3.0 and USB 2.0 Share Port: Connect a USB storage device to share files across
your network or connect a USB printer to share printers across your network
(Printer Control Center utility required for printer sharing).
•WPS Button (Wi-Fi Protected Setup): Push and hold this button for 5 seconds to
activate WPS. The Power LED will blink when WPS is activated.
•Gigabit LAN Ports 1-4: Connect Ethernet cables (also called network cables) from
your router LAN ports to your wired network devices.
•Gigabit Internet Port:Connect an Ethernet cable from your router Internet port to
your modem.
Reset Button (Located on Bottom)
Gigabit LAN
Ports 1-4
Gigabit Internet
Port
USB 3.0 Share
Port
Power Port
WPS Button
On/Off Power Switch
(EU only)
USB 2.0 Share
Port

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-818DRU
6
•On/Off Power Switch: Push the router On/Off power switch to turn your router
“On” (Inner position) or “Off” (Outer position). Available on EU version product
only.
•Power Port:Connect the included power adapter from your router power port and
to an available power outlet.
•Reset Button (Located on Bottom): Press and hold this button for 10 seconds to
reset the router.
Front View
USB 3.0 and USB 2.0 LED: The indicator turns green indicating a USB device is
connected and turns off when there is no USB device connected.
5GHz Wireless (Link/Activity) LED: The indicator turns on solid green when 5GHz
wireless is enabled on your router. The indicator will blink during when data is
transmitted or received by your 5GHz wireless client devices connected to your
router.
2.4GHz Wireless (Link/Activity) LED: The indicator turns on solid green when
2.4GHz wireless is enabled on your router. The indicator will blink when data is
transmitted or received by your 2.4GHz wireless client devices connected to your
router.
LAN Ports 1-4 (Link/Activity) LED: These LED indicators are solid green when the
Gigabit LAN ports 1-4 (Black) are physically connected to your wired network
devices (which are turned on) with a network or Ethernet cable. These LED
indicators will blink green while data is transmitted or received through your
router’s Gigabit LAN ports.
Internet Port (Link/Activity) LED – This LED indicator is solid green when your
router Gigabit Internet port is physically connected to the modem network or
Ethernet port with a network or Ethernet cable (modem turned on). The LED
indicator will be blinking green while data is transmitted or received through the
Gigabit Internet port of your router.
Power/WPS LED: The indicator is solid green when your router is powered on.
Otherwise if this LED indicator is off, there is no power to your router. The
indicator will also blink when WPS is activated. The LED will stop blinking and
remain solid green automatically once WPS process is completed.
USB Share Port
5GHz Wireless LED
2.4GHz Wireless LED
LAN Ports 1-4 LEDs
Internet Port LED
Power/WPS LED

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-818DRU
7
Application Diagram
The router is installed near the modem (typically supplied by your ISP “Internet Service Provider”)
and physically connected to it from the router’s Internet port to the modem’s network port which
connects to the Internet. 2.4GHz wireless signals from the router are broadcasted to wireless
clients such as laptops (with wireless capability) and the less congested 5GHz wireless signals from
the router are broadcasted to other wireless client devices such as TVs, game consoles, or media
bridges thereby providing Internet access for all wireless client devices, for faster 11ac
connection.
Router Setup
Creating a Home Network
What is a network?
A network is a group of computers or devices that can communicate with each other. A
home network of more than one computer or device also typically includes Internet
access, which requires a router.
A typical home network may include multiple computers, a media player/server, a
printer, a modem, and a router. A large home network may also have a switch,
additional routers, access points, and many Internet-capable media devices such as TVs,
game consoles, and Internet cameras.
•Modem: Connects a computer or router to the Internet or ISP (Internet Service
Provider).
•Router:Connects multiple devices to the Internet.
•Switch: Connect several wired network devices to your home network. Your router
has a built-in network switch (the LAN port 1-4). If you have more wired network
devices than available Ethernet ports on your router, you will need an additional
switch to add more wired connections.
How to set up a home network
1. For a network that includes Internet access, you’ll need:
•Computers/devices with an Ethernet port (also called network port) or wireless
networking capabilities.
•A modem and Internet service to your home, provided by your ISP (modem
typically supplied by your ISP).
•A router to connect multiple devices to the Internet.
2. Make sure that your modem is working properly. Your modem is often provided by
your Internet Service Provider (ISP) when you sign up for Internet service. If your
modem is not working contact your ISP to verify functionality.
3. Set up your router. See “How to setup your router” below.
4. To connect additional wired computers or wired network devices to your network,
see “Connect additional wired devices to your network” on page 12.
5. To set up wireless security on your router, see “Wireless Networking and Security” on
page 12.
How to setup your router
Refer to the Quick Installation Guide or continue to the next section “Router
Installation” on page 8 for more detailed installation instructions.
Where to find more help
In addition to this User’s Guide, you can find help below:
•http://www.trendnet.com/support (documents, downloads, and FAQs are available
from this Web page)

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-818DRU
8
Router Installation
Before you install
Many Internet Service Providers (ISPs) allow your router to connect to the Internet
without verifying the information fields listed below. Skip this section for now and if
your router cannot connect to the Internet using the standard installation process, come
back to this page and contact your ISP to verify required ISP specification fields listed
below.
1. Obtain IP Address Automatically (DHCP)
Host Name (Optional)
MAC Address: ___:___:___:___:___:___ Enter your PC’s MAC address (Optional)
DNS Servers Address 1: _____. _____._____._____ (Optional)
DNS Servers Address 2: _____. _____._____._____ (Optional)
2. Static/Fixed IP address
MAC Address: ___:___:___:___:___:___ Enter your PC’s MAC address (Optional)
IP Address: _____. _____._____._____ (e.g. 215.24.24.129)
Subnet Mask: _____. _____._____._____
Default Gateway IP Address: _____. _____._____._____
DNS Servers Address 1: _____. _____._____._____
DNS Servers Address 2: _____. _____._____._____
3. PPPoE to obtain IP automatically
User Name: _________
Password: ________________
4. PPTP
Type (Dynamic IP/DHCP or Static IP)
PPTP Server: _____________________ (IP address)
IP Address: _____. _____._____._____ (e.g. 215.24.24.129)
Subnet Mask:_____. _____._____._____
Default Gateway:_____. _____._____._____
Server IP: _____. _____._____._____
DNS Servers Address 1: _____. _____._____._____
DNS Servers Address 2: _____. _____._____._____
User Name: _________
Password: ________________
5. L2TP
Type (Dynamic IP/DHCP or Static IP)
L2TP Server: _____________________ (IP address)
IP Address: _____. _____._____._____ (e.g. 215.24.24.129)
Subnet Mask:_____. _____._____._____
Default Gateway:_____. _____._____._____
Server IP: _____. _____._____._____
DNS Servers Address 1: _____. _____._____._____
DNS Servers Address 2: _____. _____._____._____
User Name: _________
Password: ________________

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-818DRU
9
Hardware Installation
1. Verify that you have an Internet connection when connecting your computer directly
to your modem.
2. Turn off your modem.
3. Disconnect the Network cable from your computer to your modem.
4. Connect your modem to the router Internet port (yellow).
5. Connect your computer to one of the router LAN ports.
6. Connect the power adapter to the router and then to a power outlet.
7. Turn on your modem.
8. Verify that the status LED indicators on the front of the router are illuminated: Power,
Internet, one of the LAN ports (1,2,3,4) and Wireless Bands (2.4G,5G).

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-818DRU
10
Internet Setup Wizard
1. Open your web browser (e.g. Internet Explorer, Firefox, Safari, Chrome, or Opera) and
go to http://TEW-818DRU or you can access the router management using the IP
address http://192.168.10.1.
2. Your router will prompt you for a user name and password. For added security, the
router is preconfigured with a unique password. You can find the Password on a
sticker on the side of the router and on the label on the bottom of the router.
3. Enter your Username and Password, select your preferred language, then click Login.
User Name: admin
Password: (xxxxxxxx)
Note: User Name and Password are case sensitive.
4. The wizard will automatically begin when upon your initial setup. Click Next to begin.
5. Select “DHCP Connection (Dynamic IP Address)” and click Next to continue.
Note: Dynamic IP (DHCP) is typical for most Internet services. You can verify your
settings with your Internet Service Provider.
6. Confirm your Internet connection type and wireless interface settings. Click Apply to
save settings.

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-818DRU
11
7. Click OK when prompted.
9. Open a new tab on your web browser and enter in a website (e.g.
www.trendnet.com) to verify that you have an Internet connection.
10. For added security, the router is pre-encrypted with its own unique wireless network
security key. You can find the unique network security key and pre-assigned network
name (SSID) on a sticker on the front of the router and on a label on the bottom of the
router. If you would like to change the wireless settings, continue to the next page to
launch the wireless setup wizard.

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-818DRU
12
Connect additional wired devices to your network
You can connect additional computers or other network enabled devices to your
network by using Ethernet cables to connect them to one of the available LAN ports
labeled 1,2,3,4 on your router. Check the status of the LED indicators (1, 2, 3, or 4) on
the front panel of your router to ensure the physical cable connection from your
computer or device.
Note: If you encounter issues connecting to your network, there may be a problem with
your computer or device network settings. Please ensure that your computer or device
network settings (also called TCP/IP settings) are configured to obtain IP address settings
automatically (also called dynamic IP address or DHCP) and to Obtain DNS Server
address settings automatically.
Wireless Networking and Security
How to choose the type of security for your wireless network
Setting up wireless security is very important. Leaving your wireless network open and
unsecure could expose your entire network and personal files to outsiders. TRENDnet
recommends reading through this entire section and setting up wireless security on your
new router.
There are a few different wireless security types supported in wireless networking each
having its own characteristics which may be more suitable for your wireless network
taking into consideration compatibility, performance, as well as the security strength
along with using older wireless networking hardware (also called legacy hardware).
It is strongly recommended to enable wireless security to prevent unwanted users from
accessing your network and network resources (personal documents, media, etc.).
In general, it is recommended that you choose the security type with the highest
strength and performance supported by the wireless computers and devices in your
network. Please review the security types to determine which one you should use for
your network.
Wireless Encryption Types
•WEP: Legacy encryption method supported by older 802.11b/g hardware. This is
the oldest and least secure type of wireless encryption. It is generally not
recommended to use this encryption standard, however if you have old 802.11 b or
802.11g wireless adapters or computers with old embedded wireless cards(wireless
clients), you may have to set your router to WEP to allow the old adapters to
connect to the router.
Note: This encryption standard will limit connection speeds to 54Mbps.
•WPA: This encryption is significantly more robust than the WEP technology. Much
of the older 802.11g hardware was been upgraded (with firmware/driver upgrades)
to support this encryption standard. Total wireless speeds under this encryption
type however are limited to 54Mbps.
•WPA-Auto: This setting provides the router with the ability to detect wireless
devices using either WPA or WPA2 encryption. Your wireless network will
automatically change the encryption setting based on the first wireless device
connected. For example, if the first wireless client that connects to your wireless
network uses WPA encryption your wireless network will use WPA encryption. Only
when all wireless clients disconnect to the network and a wireless client with WPA2
encryption connects your wireless network will then change to WPA2 encryption.

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-818DRU
13
Note: WPA2 encryption supports 802.11n speeds and WPA encryption will limit
your connection speeds to 54Mbps
•WPA2: This is the most secure wireless encryption available today, similar to WPA
encryption but more robust. This encryption standard also supports the highest
connection speeds. TRENDnet recommends setting your router to this encryption
standard. If you find that one of your wireless network devices does not support
WPA2 encryption, then set your router to either WPA or WPA-Auto encryption.
Note: Check the specifications of your wireless network adapters and wireless
appliances to verify the highest level of encryption supported.Below is brief
comparison chart of the wireless security types and the recommended
configuration depending on which type you choose for your wireless network.
Security Standard WEP WPA WPA2
Compatible
Wireless
Standards
IEEE 802.11a/b/g
(802.11n devices
will operate at
802.11g to connect
using this standard)
IEEE 802.11a/b/g
(802.11n devices
will operate at
802.11g to connect
using this
standard) IEEE 802.11a/b/g/n
Highest
Performance
Under This
Setting Up to 54Mbps Up to 54Mbps
Up to 450Mbps (11n)
and up to 1.3Gbps
(11ac)*
Encryption
Strength Low Medium High
Additional
Options
Open System or
Shared Key,
HEX or ASCII,
Different key sizes
TKIP or AES,
Preshared Key or
RADIUS
TKIP or AES,
Preshared Key or
RADIUS
Recommended
Configuration
Open System ASCII
13 characters
TKIP
Preshared Key
8-63 characters
AES
Preshared Key
8-63 characters
*Dependent on the maximum 802.11n/ac data rate supported by the device (150Mbps,
300Mbps, 450Mbps, 867Mbps, or 1.3Gbps)
Secure your wireless network
Wireless (2.4GHz or 5GHz)> Security
After you have determined which security type to use for your wireless network (see
“How to choose the security type for your wireless network” on page 12), you can set up
wireless security.
1. Log into your router management page (see “Access your router management page”
on page 17).
2. Click on the Wireless button.
3. Underneath the basic wireless band section, you will see Security Mode. Click on the
drop-down list to select your wireless security type.
Selecting WEP-OPEN, WEP-SHARED:
If selecting WEP (Wired Equivalent Privacy), please review the WEP settings to configure
and click Apply to save the changes.
Note: WEP security is only available in the Security Mode list when 802.11 n-mode is set
to Off under Wireless (2.4GHz or 5GHz) > Basic.
Note: WPS functionality is not available when using WEP.
In the Security Mode drop-down list, select WEP-OPEN or WEP-SHARED.
Note: It is recommended to use WEP-OPEN because it is known to be more secure than
Shared Key.

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-818DRU
14
•Current Network Key - You can define up to 4 keys however, only one key can be
active at any given time. Most users simply define one key. Click the drop-down list
to select which of the 4 keys is the active key.
•Network Key 1-4
oThis is where you enter the WEP key needed for a computer to connect to the
router wirelessly
oYou can define up to 4 passwords or 4 keys. Only one key can be active at a given
time. Most users simply define one key.
oChoose a key index 1, 2, 3, or 4 and enter the key.
oWhen connecting to the router, the client must match both the password and the
Key number. (e.g. if you have activated Key 2 with a password of 12345, then the
client must select: Key 2 (entering Key 1, 3, or 4 will block the ability to connect)
and enter password 12345)
Note: It is recommended to use 128-bit format because it is more secure to use a
key that consists of more characters.
•Click here to display - Typically, the password characters are masked for security
purposes. This link displays actual characters of the currently assigned password for
your reference.
Selecting WPA-PSK, WPA2-PSK, WPA2-PSK, or Mixed (WPA2-PSK recommended):
In the Security Mode drop-down list, select WPA-.
The following section outlines options when selecting WPA-PSK, WPA2-PSK, or WPA2-
PSK Mixed (Preshared Key Protocol),
•WPA Encryption: Select a Cipher Type to use. When selecting WPA-PSK security, it
is recommended to use TKIP + AES.
oWhen selecting WPA2-PSK Mixed security, it is recommended to use TKIP+AES.
oWhen selecting WPA2-PSK security, it is recommended to use AES.
•WPA passphrase:Enter the passphrase.
oThis is the password or key that is used to connect your computer to this router
wirelessly
Note: 8-63 alphanumeric characters (a,b,C,?,*, /,1,2, etc.)
•Network Key Rotation Interval: Enter the time interval (seconds) of when the
network passphrase will rotate. Note: It is recommended to use the default interval
time. Your passphrase will not change, rotation of the key is part of the WPA
protocol and designed to increase security.
Selecting WPA, WPA2, or WPA2 Mixed:
WEP Key Format HEX ASCII
Character set 0-9 & A-F, a-f only Alphanumeric (a,b,C,?,*, /,1,2, etc.)
64-bit key length 10 characters 5 characters
128-bit key length 26 characters 13 characters

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-818DRU
15
The following section outlines options when selecting WPA. WPA2 or WPA2 Mixed
known as EAP (Extensible Authentication Protocol). Also known as called Remote
Authentication Dial-In User Service or RADIUS.
Note: This security type requires an external RADIUS server, PSK only requires you to
create a passphrase.
•RADIUS Server:Enter the IP address of the RADIUS server. (e.g. 192.168.10.250)
•RADIUS Port: Enter the port your RADIUS server is configured to use for RADIUS
authentication.
Note: It is recommended to use port 1812 which is typical default RADIUS port.
•RADIUS Key: Enter the shared secret used to authorize your router with your
RADIUS server.
Connect wireless devices to your router
A variety of wireless network devices can connect to your wireless network such as:
•Gaming Consoles
•Internet enabled TVs
•Network media players
•Smart Phones
•Wireless Laptop computers
•Wireless IP cameras
Each device may have its own software utility for searching and connecting to available
wireless networks, therefore, you must refer to the User’s Manual/Guide of your
wireless client device to determine how to search and connect to this router’s wireless
network.
See the “Appendix” on page 63 for general information on connecting to a wireless
network.
Connect wireless devices using WPS
WPS (Wi-Fi Protected Setup) is a feature that makes it easy to connect devices to your
wireless network. If your wireless devices support WPS, you can use this feature to
easily add wireless devices to your network.
Note: You will not be able to use WPS if you set the SSID Broadcast setting to Disabled or
if you are using WEP security.
There are two methods the WPS feature can easily connect your wireless devices to
your network.
•Push Button Configuration (PBC) method
o(RECOMMENDED) Hardware Push Button method–with an external button
located physically on your router and on your client device
oWPS Software/Virtual Push Button - located in router management page
•PIN (Personal Identification Number) Method - located in router management page
Note: Refer to your wireless device documentation for details on the operation of
WPS.
Recommended Hardware Push Button (PBC) Method
Note: It is recommended that a wireless key (passphrase or password) is created
before connecting clients using the PBC method. If no wireless key is defined when
connecting via PBC, the router will automatically create an encryption key that is 64
characters long. This 64 character key will then have to be used if one has to
connect computers to the router using the traditional connection method.
To add a wireless device to your network, simply push the WPS button on the wireless
device you are connecting (consult client device User’s Guide for length of time), then
push and hold the WPS button located on your router for 3 seconds and release it. A
blue LED on your router WPS button will flash indicating that the WPS setup process has
been activated on your router. (See “Product Hardware Features” on page 5)
For connecting additional WPS supported devices, repeat this process for each
additional device.

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-818DRU
16
PBC (Software/Virtual Push Button)
Wireless (2.4GHz or 5GHz)> WPS
In addition to the hardware push button located physically on your router, the router
management page also has push button which is a software or virtual push button you
can click to activate WPS on your router.
1. Log into your router management page (see “Access your router management page”
on page 17).
2. Click on the Advanced tab.
3. Select wireless band you would like to configure, Wireless 2.4GHz or Wireless 5GHz
and click on WPS.
4. To add a wireless device to your network, simply click the Add Enrollee button in the
router management page, then push the WPS button on the wireless device (consult
wireless device’s User’s Guide for length of time) you are connecting.
PIN (Personal Identification Number)
Wireless (2.4GHz or 5GHz)> WPS
If your wireless device has WPS PIN (typically an 8-digit code printed on the wireless
device product label or located in the wireless device wireless software utility), you can
use this method.
1. Log into your router management page (see “Access your router management page”
on page 17).
2. Click on the wireless band Wireless (2.4GHz or 5GHz)you would like to configure and
click on WPS.
3. Next to Station PIN, enter the WPS PIN of the wireless device you are connecting and
click the Add Enrollee button.
Note: You may need to initiate the WPS PIN on your wireless device first when using
this method. Refer to your wireless device documentation for details on the
operation of WPS.

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-818DRU
17
Basic
Access your router management page
Note: Your router management page URL/domain name http://TEW-818DRU or IP
address http://192.168.10.1 is accessed through the use of your Internet web browser
(e.g. Internet Explorer, Firefox, Chrome, Safari, Opera) and will be referenced frequently
in this User’s Guide.
1. Open your web browser (e.g. Internet Explorer, Firefox, Safari, Chrome, or Opera) and
go to URL/domain name http://TEW-818DRU or IP address http://192.168.10.1. Your
router will prompt you for a user name and password.
2. For added security, the router is preconfigured with a unique password. You can find
the Password on a sticker on the side of the router and on the label on the bottom of
the router.
3. Enter your Username and Password, select your preferred language, then click Login.
•User Name: admin
•Password: (xxxxxxxx)
Note: User Name and Password are case sensitive.
Network Status
This screen appears when you login into your router. This section provides an over view
of your.
+

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-818DRU
18
Internet: This icon turns green to indicate that your network has a valid
Internet connection. Amber color indicates a physical connection on the
Internet port of the router but with no valid Internet connection. Red color
indicates disconnected Internet port.
Guest Network: The section provides your router’s guest network SSID.
USB: This icon turns green when your router has a valid USB connection. Red
Amber color indicates no USB connection.
Wireless: This icon turns green to indicate when your router’s wireless
network is enabled. Red color indicates your router’s wireless network is
disabled.
Security: This section provides your router’s wireless network security
information.
Connected Devices: This section provides information of all connected
devices on your router.
Wireless settings
Wireless (2.4GHz or 5GHz)> Basic
This section outlines available management options under basic wireless sub tab for
both 2.4GHz and 5GHz wireless sections.
1. Log into your router management page (see “Access your router management page”
on page 17).
2. Click on Wireless and under the Basic tab.
3. To save changes to this section, click Apply when finished.
•Radio On/Off:
oOn: Turns on wireless radio.
oOff: Turns off wireless radio.
•Wireless Name (SSID): Enter the wireless name (SSID) for your wireless network.
This acronym stands for Service Set Identifier and is the name of your wireless
network. It differentiates your wireless network from others around you. By
default, the router’s wireless name is unique to the device. If you choose to change
the SSID, change it to a name that you can easily remember.
•802.11 n-mode
oAuto: Select this option if you have non-802.11n wireless clients (802.11a/b/g)
connecting to your wireless network.

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-818DRU
19
oOff: The router will operate in 802.11n mode only, non-802.11n wireless clients
will not be able to connect when this option is selected.
When applying the 802.11 n-mode setting on 2.4GHz, please keep in mind the following:
•Wireless devices that support 802.11n are backwards compatible and can connect
wirelessly at 802.11g or 802.11b.
•Connecting at 802.11b or 802.11g will limit the capability of your 802.11n
supported wireless devices from obtaining higher performance and data rates.
•Allowing 802.11b or 802.11g devices to connect to an 802.11n capable wireless
network may degrade the wireless network performance below the higher
performance and data rates of 802.11n.
•Wireless devices that only support 802.11b or 802.11g will not be able to connect
to a wireless network that is set to 802.11n only mode.
•Wireless devices that only support 802.11b will not be able to connect to a wireless
network that is set to 802.11g only mode.
•Broadcast Network Name (SSID):
oEnabled allows wireless devices to search and discover your wireless network
name (also called SSID) broadcasted by your router.
oDisabled turns off the ability for wireless devices to find your network. It is still
possible for wireless devices to be configured to connect to your wireless
network. Disabling this setting will disable WPS functionality.
•Frequency (Channel): To manually set the channel on which the router will
broadcast, click the drop-down list and select the desired Channel for wireless
communication. The goal is to select the Channel that is least used by neighboring
wireless networks.
•Channel Bandwidth: Select the appropriate channel width for your wireless
network. This setting only applies to 802.11n and 802.11ac. For greater 802.11n
performance in 2.4GHz, select 40MHz (Options: 20MHz or 40MHz). For greater
802.11ac performance in 5GHz, select 80MHz (Options: 20MHz, 40MHz, or 80MHz)
It is recommended to use the default channel bandwidth settings.
Note: Please note that this setting may provide more stability than the higher
channel bandwidth settings such as 40 MHz or 80MHz for connectivity in busy
wireless environments where there are several wireless networks in the area.
20 MHz:This mode operates using a single 20MHz channel for wireless devices
connecting at 802.11n on both 2.4GHz and 5GHz. This setting may provide more
stability than 40MHz or 80MHz for connectivity in busy wireless environments
where there are several neighboring wireless networks in the area.
40 MHz or 80MHz:When 40MHz or 80MHz is active, this mode is capable of
providing higher performance only if the wireless devices support the channel
bandwidth settings. Enabling 40MHz or 80MHz typically results in substantial
performance increases when connecting an 802.11n or 802.11ac client. Note:
Please note that 80MHz channel bandwidth is only available for 802.11ac 5GHz.
Guest Network
Wireless (2.4GHz or 5GHz) > Guest Network
Creating an isolated and separate wireless guest network (2.4GHz or 5GHz) allows
wireless clients to connect to your network for Internet access only and keep your local
LAN network safe by restricting guest access to your LAN network resources such as
shared documents and media files on your computers, network storage, and printers.
1. Log into your router management page (see “Access your router management page”
on page 17).
2. Click on the Basic tab.
3. Click on Guest Network section.
4. Review the Guest Network settings, click Apply when finished.
•Enabled: Check the option to enable the Guest Network.

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-818DRU
20
•Wireless Name (SSID): This acronym stands for Service Set Identifier and is the
name of your wireless network. It differentiates your wireless network from others
around you. It is recommended to use a different name from your primary wireless
network to a name that you can easily identify and differentiate from the primary.
You can reference your guests to access this network instead of the primary.
•Internet Access Only: By default, the option is checked to allow guests to only
access the Internet and restrict access to your local LAN network. Please note that
unchecking this option will open access to local LAN network to guests.
•Wireless Client Isolation: Checking this option will restrict guests from
communicating with each other over the guest network such as share files.
5. Under Security Policy, you can apply a different wireless security type and key to the
guest network. Please refer to page 15 to find out about different security types and
page 16 for wireless security configuration.
Advanced Guest Network Settings
Wireless (2.4GHz or 5GHz) > Guest Network>Advanced Guest Network Settings
At the bottom of the guest network page, you can click the “Advanced Guest Network
Settings” to configure the additional guest network options such as the guest network
interface IP address, DHCP server IP address range, and DHCP reservation.
Review the Advanced Guest Network settings, click Apply when finished.
In most cases, you do not need to change your guest network IP address settings.
Typically, the router IP address settings only needs to be changed, if you plan to use
another router in your network with the same IP address settings, if you are connecting
your router to an existing network that is already using the IP address settings your
router is using, or if you are experiencing problems establishing VPN connections to
your office network through your router.
•IP Address – Enter the new guest network IP address.
(e.g. 192.168.100.1)
•Subnet Mask – Enter the new guest network subnet mask.
(e.g. 255.255.255.0)
Note: If you are not encountering any issues or are not faced with one of the cases
described above or similar, it is recommended to keep your guest network sIP address
settings as default. The guest network IP address settings should different from your
local LAN network IP address settings (Default: 192.168.10.1 / 255.255.255.0)
Your router can be used as a DHCP (Dynamic Host Configuration Protocol) server to
automatically assign an IP address to each computer or device on your guest network.
The DHCP server is enabled by default on your router. It is recommended to leave this
setting enabled.
•DHCP Server – Enable or Disable the DHCP server.
•DHCP Start IP – Changes the starting address for the DHCP server range. (e.g.
192.168.20.20)
•DHCP End IP – Changes the last address for the DHCP server range. (e.g.
192.168.20.30)
•Lease Time – Enter the lease time in seconds.
DHCP (Dynamic Host Configuration Protocol) reservation (also called Static DHCP) allows
your router to assign a fixed IP address from the DHCP server IP address range to a
specific device on your guest network.