Trendstyle base cabinet User manual

400mm
base cabinet
www.trendstyle.com.au
Step 1
Follow these instructions to
build and attach your cabinet.
Tools you will need
To put your trendstyle cabinets together you will need the following tools.
Cordless drill with:
• Number 2 screw tip
• 4mm drill bit
• Number 12
countersinking drill bit
Tape
measure
Pencil Clamps
(quick release)
Safety
gear
Adjustable
square
65mm
wood screw
Spirit level
(900mm recommended)
Wall fixing
(If necessary)
page 1
Before you get started
All cabinets will need to be attached to the wall using a minimum of
8 gauge 65mm screws if you have a stud wall. If your wall is
concrete, brick or another surface ask your hardware specialist for
advice on the right fixing method.
To help identify panels, counter sunk holes always face
outwards.
All holes that aren’t already pre-drilled should be drilled prior to
screwing using a No 12 countersinking drill bit.
Make sure you always use safety gear like a mask, ear muffs and
glasses when using tools.
Make sure you leave plumbing and electrical work to qualified trades
people. Never try this yourself.
For extra strength use exterior woodworking glue when
assembling cabinets.
F
G
Hardware included
C
adjustable
legs x 4
E
stick on end
caps x 6
B
28mm
wood screws x 16
A
50mm
wood screws x 27
door
buffer x 2
14mm
screws x 2
D
plastic shelf
support x 4

www.trendstyle.com.au
400mm base cabinet
page 2
Set height of the adjustable feet to 145mm.
What you will need
C
adjustable
legs
B
28mm
wood screws
A
50mm
wood screws
Assembling cabinet
Installing adjustable shelf
Step 1
1
4 5 6
2 3
Cabinet complete
1 2 3
A
bottom panel
back panel
A
side panel
side panel
back panel
A
side panel
side panel
support rail
back panel
Pre-drilled
holes
C
B
145mm C
D
Cabinet frame now complete
D
plastic shelf
support x 4

www.trendstyle.com.au
Joining cabinets
Fixing cabinets to wall
Step 1
1 2 3
450mm base cabinet
What you will need
B
28mm
wood screws
B
When you need to add an end
panel check out the end panel
instructions for installation tips.
stud
plaster board
Check that all cabinets are level and screw
into wall using the correct fixings.
Caution: Please ensure all cabinets
are screwed into your timber stud
wall using a minimum of 65mm
timber screws. If attaching to
concrete, brick, steel or any other
substrates seek advice from your
hardware specialist.
1
Clamp cabinets and pre-drill screw holes.Check that all cabinets are level.
page 3

attaching door
www.trendstyle.com.au
Step 2
Follow these instructions to
build and attach your cabinet.
Before you get started
Make sure you leave plumbing and electrical work to qualified trades
people. Never try this yourself.
Gloss vinyl doors & panels are protected with a top clear wrap that
needs to be removed. Depending on application of the panel, this may
need to be removed prior to installation.
All holes that aren’t already pre-drilled should be drilled prior to
screwing using a No 12 countersinking drill bit.
Hardware needed
Tools you will need
To put your trendstyle cabinets together you will need the following tools.
Cordless drill with:
• Number 2 screw tip
• 4mm drill bit
• Number 12
countersinking drill bit
Make sure you always use safety gear like a mask, ear muffs and
glasses when using tools.
Tape
measure
Pencil Safety
gear
page 4
A
14mm
wood screws

www.trendstyle.com.au
Attaching door to cabinet
Step 2
1 1
attaching door & drawer panels
What you will need
page 5
A
14mm
wood screws
side panel
door
side panel
door
side panel
door
up/down
left/right in/out
push to
disengage
side panel
door
side panel
door
up/down
left/right in/out
push to
disengage
Now push down to clip hinge
securely together.
b.
To align doors adjust marked screws.c.
Clip the door onto the hinge plates.a.
Step 1
Your Trendstyle cabinet
is now complete.
Step 2
Then follow the instructions to
fit your door and panels.
Your new Trendstyle cabinets are made from quality
products in order to last you for many years, as long as
the right care and maintenance is undertaken.
When cleaning your cabinets, ensure you use a
non-abrasive cleaner, do not use materials like
steel-wool or abrasive items that can scratch and
damage your cupboards. Avoid harsh chemicals or
thinner based products as these will damage the
melamine surfaces. While our Trendstyle cabinets are
water resistant, they are not water proof, so ensure
your cleaning cloths are only damp and not saturated.
If large spills of water occur, ensure these are attend-
ed to immediately.
We offer a dedicated customer service line for
advice or any questions you may have on
Trendstyle products.
Caring for your cabinets
[phone]
[email protected]
Call customer service on
Tip: add extra screws once
door is aligned.