Triarch 31162 User manual

Assembly Instructions
ITEM NO: 31162
FINIAL(15)
CAP(14)
STEEL WASHER(12)
GLASS SHADE(11)
RUBBER WASHER(10)
TUBE COVER(9)
SPACE TUBE(8)
NIPPLE WITH HEX NUT(7)
COUPLING(6)
GLASS PANEL(5)
BALL SCREW(3)
PLASTIC WASHER(4)
NIPPLE(2)
HEX HUT(13)
FIXTURE LOOP(1)
1.Carefully remove the fixture out of the carton, and check that all the parts are included referring to the
above illustration .Make sure not to misplace any parts that are needed for the installation;
2.Install the fixture loop(1)onto nipple(2);
3.Thread nipple with hex nut(7)into coupling(6),then slide the space tube(8),tube cover(9),rubber
washer(10),glass sahde(11)and steel washer(12)onto nipple with hex nut(7),and secure them with hex
nut(13);
4.Slide the cap(14)onto nipple with hex nut(7),and secure it with finial(15);
5.Install the ball screw(3)through hole of the plastic washer(4)and glass panel(5)into steel panel;
6.Install the lamps on!