Triax UFO 100 User manual

1
GB
UFO 100, 120, 140
digital antenna
Mounting instructions
GB
TRIAX - your ultimate connection
891020C

2
GB
UFO 100, 120, 140
digital antenna
Connection cable and assembly
10 mm
2 mm
8 mm
3 mm
Mount UFO on base
Ensure that the
UFO shells are
fully mated with
the bracket
A: Push forward
B: Push down
Secure with enclosed screws
Use Class A or A+ high shielded coaxial cable only.

3
GB
Mounting options on vertical or horizontal surface
Positioning the antenna:
Assemble brackets and desk
mount.
Positioning the antenna and
mark off holes for fixing.
Min. 80mm
Mounting on mast.

4
GB
UFO 100, 120, 140
digital antenna
Mounting with centre mount (UFO 120, optional accessory for UFO
100 and UFO 140)
Positioning the antenna:
Centre mounting bracket and
deckmount. Position the antenna
and mark off holes for fixing.
Positioned antenna
and counter nut fixed.
Mounting with universal mount (UFO 120 and UFO 140)

5
GB
Troubleshooting guide
Problem Possible root cause Solution
Weak or missing signal Check LED on PSU/power inserter
(optional accessory IFP 529)
Often this is caused by a short or
a missing connection in the coax
cable or the cable connectors.
Remove the cable from the PSU/
power inserter. If the LED lights up,
there is a short in the cable. Repair
or replace the cable.
If the LED is still off, replace the
PSU/power inserter.
Weak or missing signal Check LED on PSU/power inserter
(optional accesory IFP 529)
Check LED on UFO antenna
Often this is caused by a short or
a missing connection in the coax
cable or the cable connectors.
If the LED lights up on the PSU/
power inserter but not on the UFO,
there is possibly a missing connec-
tion in the cable or connectors.
Repair or replace cable and/or con-
nectors.
Interference Interference is often caused by dif-
ferent electronic equipment – mobile
phones, computers, tablets or trans-
mitters being used in close proximity
to the UFO.
Increase the distance to the interfer-
ing source of possible.
Increase the height of the UFO in
order to improve signal reception.
Pixelation and missing
audio
Pixelation and missing audio is often
caused by different electronic equip-
ment – mobile phones, computers,
tablets or transmitters being used in
close proximity to the UFO.
Increase the distance to the interfer-
ing source of possible.
Increase the height of the UFO in
order to improve signal reception.
Ghosting; double pictures
(analog signal only)
Ghosting is caused by the TV signal
being reflected from buildings, large
ships etc.
Change position a few meters will
often solve the problem.

6
GB
UFO 100, 120, 140
digital antenna
Application examples
Fuse
5A
TV

7
GB
Type
Art. No.
UFO 100
Digital
109100
UFO 120
Digital
109120
UFO 140
Digital
109140 LTE is a trademark of ETSI
Frequency range FM
VHF
UHF
MHz
MHz
MHz
87.5-108
174-230
470-862
87.5-108
174-230
470-862
87.5-108
174-230
470-790
Channels FM/5-12/21-69 FM/5-12/21-69 FM/5-12/21-60
Elements pcs. 1 1 1
Opening angle ver./hor. deg. 90/360 90/360 90/360
Windload N 5.5 5.5 5.5
Gain dB 28 28 28
Noise figure dB 2.5 2.5 2.5
Max. output voltage dBµV
108 108 108
Supply voltage V 5-24 5-24 5-24
Power consumption mA 50 50 50
Dimensions length
width
height
mm
mm
mm
325
255
65
325
255
65
325
255
65
Connector F-connectors F-connectors F-connectors
Included
Mast bracket Ø25-60
Plastic base
Mast bracket Ø25-60
Plastic base
Universal mount
Centre mount
Mast bracket Ø25-60
Plastic base
Universal mount
Centre mount
Art. No. 133225
IFP 529
Power inserter
Art. No. 339529
IFP 502
Power supply
Art. No. 339502
Technical data
Accessories

8
GB
DECLARATION OF CONFORMITY
TRIAX confirms that the product conforms to relevant EEC harmonized
standards and consequently can carry CE-mark.
Relevant harmonized standards:
EN 50083 and EN 60065
02-2012
TRIAX - your ultimate connection
891020C
A product of the TRIAX group
Dealer