Triax CCS 1000 S User manual

TRIAX - your ultimate connection
A
A
CLASS
CLASS
KLASSE
KLASSE
Assembly Instructions
Head-End HDTV Converter to IP
DVB-S 2 to SPTS
CCS 1000 S
Art. No. 325191 GB

- 2 -
- 2 -
Contents
1 Safety regulations and notes .....................................................................................4
2 General information .................................................................................................5
2.1 Packing contents..........................................................................................5
2.2 Meaning of the symbols used........................................................................5
2.3 Technical data.............................................................................................5
2.4 Description .................................................................................................6
2.5 Software query............................................................................................7
3 Assembly .................................................................................................................8
3.1 Installing the cassette....................................................................................8
3.2 EMC regulations..........................................................................................8
3.3 Cassette overview........................................................................................9
3.4 Connecting the cassette..............................................................................10
3.5 Retrofitting a CA module ............................................................................10
4 The control panel at a glance .................................................................................. 11
4.1 Menu items...............................................................................................11
4.2 Control panel............................................................................................11
5 Programming .........................................................................................................12
5.1
Programming procedure ..............................................................................12
5.1.1 Channel strips “A” (without CA module) and “B”.................................12
5.1.2 Channel strip “A” with CA module ....................................................14
5.2 Programming the cassette ..........................................................................15
Selecting the cassette, displaying the software version....................................15
Setting the Ethernet parameters ...................................................................16
Setting the IP address of the cassette ............................................................16
Setting the address range ...........................................................................17
Setting the address of the gateway ..............................................................18
Setting the UDP port...................................................................................18
Selecting the input data stream....................................................................19
Setting the LNB oscillator frequency .............................................................19
Setting the input symbol rate .......................................................................20
Setting the DVB mode ................................................................................20
Setting the input frequency..........................................................................21
Testing the signal to noise ratio....................................................................22
Allocating the IP addresses .........................................................................23
Switching the IP address off or on................................................................24
Selecting the transmission protocol...............................................................24
Setting the port number ..............................................................................24
Copying the settings to all IP addresses ........................................................25
Defining the quantity of data packets ...........................................................25
Setting the forward error correction .............................................................25
Setting the transmission channel ..................................................................25
Copying the settings to all IP addresses ........................................................26
Setting IP addresses for services ..................................................................27

- 3 -
- 3 -
Allocating IP addresses to services manually.................................................27
Allocating IP addresses to services automatically ...........................................27
Allocating services manually.......................................................................28
Selecting the sound options of the service.....................................................29
Switching DVB service information on or off..................................................30
Copying the settings to all IP addresses ........................................................30
Displaying the output data rate....................................................................31
Saving settings ..........................................................................................31
5.2.1 Operation with a CA module............................................................31
Setting the operating voltage for the CA module .................................31
Setting the PID monitoring ................................................................32
Configuring the CA module..............................................................33
Decoding services ...........................................................................34
6 Final procedures.....................................................................................................35

- 4 -
- 4 -
1 Safety regulations and notes
• Assembly, installation and servicing should be carried out by authorised
electricians.
• Switch off the operating voltage of the system before beginning with as-
sembly or service work or pull out the mains plug.
• Do not perform installation and service work during thunderstorms.
• Install the system so it will not be able to vibrate…
- in a dust-free, dry environment
- in such a manner that it is protected from moisture, fumes, splashing
water and dampness
- somewhere protected from direct sunlight
- not within the immediate vicinity of heat sources
- in an ambient temperature of -20 °C to +50 °C.
• Ensure that the head-end station is adequately ventilated. Do not cover
the ventilation slots.
• Beware of short circuits
• No liability is accepted for any damage caused by faulty connections or
inappropriate handling.
• Observe the relevant standards, regulations and guidelines on the instal-
lation and operation of antenna systems.
• Earth the SAT receiver in accordance with DIN EN 50083-1 / 60728-11
and VDE 0855 (earthing, equipotential bonding rail).
• Test the software versions of the head-end station and the cassette and
update them if necessary. The current software versions can be found at
”www.triax.com”.
• For further information please read the assembly instructions for the
head-end station used.
Take action to prevent static discharge when working on the device.
Electronic devices should never be disposed of in the household rubbish. In
accordance with directive 2002/96/EC of the European Parliament and
the European Council from January 27, 2003 which addresses old elec-
tronic and electrical devices, such devices must be disposed of at a desig-
nated collection facility. At the end of its service life, please take your
device to one of these public collection facilities for proper disposal.

- 5 -
- 5 -
2 General information
2.1 Packing contents
1 Cassette CCS 1000 S 2 HF cables
1 CD (assembly instructions) 1 Brief assembly instructions
2.2 Meaning of the symbols used
Important note
—> General note
• Performing works
2.3 Technical data
The devices meet the following EU directives:
2006/95/EC, 2004/108/EC
The product fulfils the guidelines and standards for CE labelling.
HF input
Frequency range: 925 … 2150 MHz
Level range: 60 dBµV … 80 dBµV
Return loss: > 8 dB
Impedance: 75 Ω
DVB-S modes: QPSK 1/2 , 2/3 , 3/4 , 5/6 , 7/8
DVB-S2 modes: QPSK 1/2 , 3/5 , 2/3 , 3/4 , 4/5 , 5/6 , 8/9 , 9/10
8PSK
3/5 , 2/3 , 3/4 , 5/6 , 8/9 , 9/10
Symbol rate DVB-S: QPSK: 2 … 45 MSymb/s
Symbol rate DVB-S2: QPSK: 10 … 30 MSymb/s
8PSK: 10 … 31 MSymb/s
LAN interface
Standard: 100-BASE-T
Data rate: ≤80 MBit
Protocols: UDP (User Data Protocol),
RTP (Real-Time Transport Protocol)
ASI interfaces
Standard: DIN EN 50083-9
Format: MPEG ISO IEC 13818-1
User data rate: 2 … 90 Mbit/s

- 6 -
- 6 -
Impedance: 75 Ω
Level (input / output): 800 mVPP ± 10%
Return loss (input): > 17 dB (5 … 270 MHz)
Connections
SAT inputs: 2 F sockets
HF output: 1 IEC socket (no function)
LAN: 1 RJ 45 socket
ASI input: 1 BNC socket, 75 Ω
ASI output: 1 BNC socket, 75 Ω
Connection strip (10-pin): for supply voltages and control circuits
RS 232 socket: serial interface for software update
Conditional access: 1 (several channels can be decoded)
2.4 Description
The cassette is a DVB-S2 / SPTS converter which combines modulated serv-
ices (programmes) in accordance with the DVB-S-/DVB-S2 standard and data
streams supplied via the ASI interface into one data stream in the TPS module.
This is emitted via the LAN interface and can contain up to 16 services. For
operating the cassette in a LAN network it can be assigned its own IP address.
The cassette is equipped with two tuners. The accompanying channel strips
consist of the digital SAT tuners and the digital signal processing levels. The
resulting data streams from the “ Tuner A ”/“ Tuner B ” channel strips and from the
data streams supplied via the ASI socket (ASI – Asynchronous Serial Interface
according to DIN EN 50083-9) can take up to 16 services and are each as-
signed an IP address. The signal supplied into the ASI input is provided again
via the ASI output.
Principle signal path:
TPS
"Tuner A"
"Tuner B"
CA-ModulCA module
ASI input
ASI output
IP address: Port:
Service 1 212.40.90 : 1234
Service 2 212.40.91 : 1234
Service 3 212.40.92 : 1234
Service 4 212.40.93 : 1234
Service 5 212.40.94 : 1234
Service 6 212.40.95 : 1234
Service 7 212.40.96 : 1234
Service 8 212.40.97 : 1234
Service 9 212.40.98 : 1234
Service 16 212.40.105 : 1234

- 7 -
- 7 -
In the head-end station display, the channel strips of the cassette are indicated
with “ Bx …A ” (“ Tuner A ”) or “ Bx …B ” (“ Tuner B ”). The channel strip “ Tuner A ”
can decode encoded channels via a corresponding CA module. The cassette is
controlled with the head-end station control unit.
Two LEDs provide an indication of the signal quality with their colour. The quality
of the received transport stream can also be shown in the display (“
C/N ” menu).
In an additional menu, the transmission of DVB service information (EIT, TDT and
SDT) or teletext (TXT) can be individually activated or deactivated.
DVB service information:
EIT (Event Information Table):
For each service, event information is transmitted (such as starting time,
duration, encryption etc.)
TDT (Time Date Table):
The transmitted table contains the current time and date.
SDT (Service Description Table):
Information relating to the encryption is also sent with the name of each
service.
The LEDs for the LAN interface show whether a network connection exists and
whether a data transfer is in progress.
When the head-end station is switched on, the two-line LC display shows the
software version of the control unit.
To operate this cassette the software version of the control unit must be “V 41”
or higher. You can find the current operating software for the control unit and
the cassette, the software “BE-Flash” and the current assembly instructions on
the website “www.triax.com”.
The cassette is designed for use in the following head-end stations:
– CSE 3301 – CSE 3308
– CSE 3312 – CSE 3319
2.5 Software query
Control unit
If necessary, you can activate the indication of the software version of the con-
trol unit manually:
• Press any two keys on the control unit of the head-end station simultaneously
until the display goes dark and the software version, e.g. “V 41” appears.
Cassette
After activating the cassette the software version of the cassette is displayed (s.
page 15).

- 8 -
- 8 -
3 Assembly
3.1 Installing the cassette
– Ensure the head-end station is mounted so it will not be able to vibrate.
Avoid, for example, mounting the head-end station onto a lift shaft or any
other wall or floor construction that vibrates in a similar way.
– Before installing or changing a cassette unplug the power cable from the
mains power socket.
• Remove the fastening screws 1of an unoccupied slot from the bracket of the
head-end station.
• Insert the cassette in this slot and push it into the housing.
• Align the cassette and apply slight pressure to connect it to the connections of
the board and the HF bus bar.
• Fasten the cassette with the screws 1.
3.2 EMC regulations
To comply with the current EMC regulations, it is necessary to connect the
lines leading in and out of the head-end station using cable terminals.
When mounting the cassette in a head-end station which is installed in a
19” cabinet, make sure the connections leading in and out for the 19” cabi-
net are made using cable terminals.
The attenuation of shielding of the connection lines must meet the require-
ments for “Class A”.
0°
1
1
A
A
CLASS
CLASS
KLASSE
KLASSE

- 9 -
- 9 -
• Insert the required number of cable terminals in the openings provided in the
head-end station or in the 19 " cabinet.
—> Cable terminals are not included in the scope of delivery.
Tighten the nuts on the cable terminals until the teeth on the lock washer have
penetrated the exterior coating and a good connection is made between the
housing and cable terminals.
3.3 Cassette overview
1Status LED of channel strip “ Tuner B ”
2SAT IF input of channel strip “ Tuner B ”
3Status LED of channel strip “ Tuner A ”
4SAT IF input of channel strip “ Tuner A ”
5Status LED of the LAN interface (yellow LED – data transfer)
6 LAN socket
7Status LED of the LAN interface (green LED – network connection)
8ASI input
9ASI output
0Type label
!Slot for a CA module
@D-SUB socket “RS 232“
The operating software of the cassette can be updated via the 9-pin D-SUB
socket “RS 232” using a PC or notebook and the software “BE-Flash”.
You can find the current operating software on the website “www.triax.com”.
#MAC address
5678 9 ! @2143 0 #

- 10 -
- 10 -
3.4 Connecting the cassette
• Connect the SAT IF connections to the SAT IF input sockets
4 (channel strip
“ Tuner A ”) and 2 (channel strip “ Tuner B ”) (figure in chapter 3.3).
• Connect the LAN socket 6 .
• Connect the ASI input 8 and the ASI output 9 to the peripheral ASI devices.
3.5 Retrofitting a CA module
The cassette is equipped with a common interface. It allows you to connect
a CA module for various encryption systems and service providers. Encoded
services (channels) can only be decoded with a CA module suitable for the
encoding system and the corresponding smart card. The smart card contains all
the information for authorisation, decoding and subscription.
– Check with the distributor or manufacturer of the CA module to be used
to ensure that it is suitable for decoding several services.
– The hardware and software of this cassette have been thoroughly pre-
pared and tested. Any changes made by service providers in the data
structures might impair or even prevent this function .
– When working with the CA module, please read the corresponding op-
erating manual from the respective provider.
• Insert the smart card 1into the CA module 2so that the chip 3on the
smart card faces the thicker side (top) of the CA module.
• Insert the CA module into the guide rails of the CA slot 4with the top side
of the CA module facing the top side of the cassette.
• Push the CA module without canting into the guide rails of the CA slot 4and
contact it to the common interface.
3
4
1
2