TRIOBIKE MID DRIVE SYSTEM User guide

MARQUARDT COMFORT SETUP MANUAL
ENGLISH V 1.0
MID DRIVE SYSTEM

Congratulations on your new bicycle! Proper assembling and
operation of your bicycle is important for your safety and
enjoyment. Our customer service department is dedicated to
your satisfaction with Triobike and its products. If you have
questions or need advice regarding assembly, parts, performance,
or returns, please contact the experts at Triobike.
Enjoy the ride!
phone: [phone]
email: [email protected]
website: www.triobike.com
social medias: youtube | facebook
hello new user
let's ride
our contacts

4
SETTING THE POSITION
2- move the joystick to the bottom 3 times.
1- move the joystick to the right 5 times.
0.0
km/h
Auto Light
Language
Mount Position

4- select the actual display position on the handlebar and push the joystick.
3- to select “mount position”, push the joystick.
Auto Light
Language
Mount Position
Left
Right
5

2- move the joystick to the bottom 2 times.
1- move the joystick to the right 5 times.
0.0
km/h
Auto Light
Language
Mount Position
6
SETTING THE LANGUAGE

German
French
English
Auto Light
Mount Position
Language
4- select the language moving the joystick up/down and then pressing it.
3- to select “Language” (in German, “Sprache”), press the joystick down.
7

2- move the joystick to the bottom 1 time.
1- move the joystick to the right 5 times.
0.0
km/h
Auto Light
Language
Mount Position
AUTOMATIC LIGHTS
8

Auto Light
Mount Position
Language
Auto Light
Mount Position
Language
4- to activate “Auto Light”, press the joystick down. Now the lights will turn on
automatically when the environmental brightness is low. Whenever the brightness goes
up, the lights will turn off after 30 seconds.
3- highlight “Auto Light”.
9

10
2- to activate the push aid, press the “^” button for 2 seconds. The bike will start moving
autonomously. Keep your finger on the “^” button to keep the bike moving.
1- to work, the Push Aid function requires at least leve 1 of assistance. It doesn’t work
when the assistance level is set to 0 or, obviously, when the system is off.
The pushing aid is available for starting riding or for pushing the bicycle. The pushing aid
can be activated up to a speed of 6 km/h. Use the pushing aid when pushing the bicycle,
when starting riding, or for supported start-up on mountainous terrain. Push the bicycle,
walking beside it. Use the pushing aid as a start-up aid when you are sitting on the bicycle.
In both cases, the pushing aid will move the pedelec when activated.
0.0
km/h
0.0
km/h
PUSHING AID

11
3- to deactivate the push aid, just release your finger from the “^” button.
IMPORTANT: The pushing aid will move the pedelec. Hold the
handlebar grip and be ready to brake.
Sit on the bicycle and do not press the pedals. Your pushing force,
combined with the pushing aid, could accelerate the pedelec very
quickly. The second pedal will also move, and can injure you when
getting on the bike! Do not use the pushing aid for slow riding.
0.0
km/h

2- move the joystick to the bottom 4 times.
1- move the joystick to the right 5 times.
0.0
km/h
Auto Light
Language
Mount Position
12
SETTING IMPERIAL UNITS

Language
Imperial
Mount Position
Language
Imperial
Mount Position
4- to switch from metric to imperial, press the joystick down.
3- highlight “Imperial”.
13

TRIOBIKE A/S
Gammel Kongevej 80, 1850 Frederiksberg C - Denmark
phone: [phone]
[email protected] | www.triobike.com