Tripp Lite U344-001-HDMI-R User manual

1
1111 W. 35th Street, Chicago, IL 60609 USA
www.tripplite.com/support
Owner’s Manual
USB 3.0 to DVI Adapter
Model #: U344-001-R
USB 3.0 to HDMI Adapter
Model #: U344-001-HDMI-R
Copyright © 2014 Tripp Lite.
All trademarks are the property of their respective owners.
PROTECT YOUR INVESTMENT!
Register your product for quicker service and
ultimate peace of mind. You could also win an
ISOBAR6ULTRA surge protector—a $50 value!
www.tripplite.com/warranty
14-08-104-9333A6-revB.indd 1 8/13/2014 11:04:00 AM

2
1. Introduction 3
1.1 Features 3
1.2 Package Contents 3
1.3 System Requirements 4
2. Installation 5
3. Using the Adapter 7
3.1 Display Properties 7
3.2 Extending Video to the Add-On Display 9
3.3 Mirroring Video on the Add-On Display 10
3.4 Making the Add-On Display the 11
Primary Display
4. Troubleshooting 12
5. Specifications 15
6. Warranty and Product Registration 16
Table of Contents
14-08-104-9333A6-revB.indd 2 8/13/2014 11:04:00 AM

3
1. Introduction
1.1 Features
• Adds an additional monitor, LCD or projector through a single
USB 3.0 port
• USB 3.0 is 10 times faster than USB 2.0, with transfer rates
up to 5 Gbps
• Backward compatible with USB 2.0
• Simultaneously connect up to 6 display adapters on a
Windows®PC
• Automatically resumes from hibernation and suspend modes
• Supports video resolutions up to 2048 x 1152 @ 60Hz
• Video streaming is supported up to 1080p
• Set additional monitors to extend the primary display,
duplicate the primary display, or set an additional monitor as
the primary display
• U344-001-R comes with a DVI to VGA adapter, allowing you
to connect either a DVI or VGA display
1.2 Package Contents
Before installation, please check the items in the
package. The package should contain the following items:
• (1) U344-001-R or (1) U344-001-HDMI-R
• (1) Driver CD
• (1) USB 3.0 Cable (U344-001-R only; cable is attached to
U344-001-HDMI-R)
• (1) Owner's Manual
• (1) DVI to VGA Adapter (U344-001-R only)
14-08-104-9333A6-revB.indd 3 8/13/2014 11:04:00 AM

4
1. Introduction
1.3 System Requirements
• Windows XP (32-bit), Vista (32- and 64-bit), 7 (32- and
64-bit), 8 (32- and 64-bit) and 8.1 (32- and 64-bit)
• USB 2.0 or 3.0 port; USB 3.0 port required for USB 3.0
speeds
• VGA, DVI or HDMI monitor
Minimum computer requirements when using
1 – 2 display adapters:
• 1.2GHz Single Core CPU
• 512MB of RAM
Minimum computer requirements when using
3 display adapters:
• 1.6GHz Single Core CPU
• 1GB of RAM
Minimum computer requirements when using
4 – 6 display adapters:
• 1.8GHz Core Duo CPU
• 1GB of RAM
Note: Only 1 added monitor can support DVD playback.
In order to support DVD playback, your computer must
meet the following minimum requirements:
• 2.0GHz Core Duo CPU
• 1GB of RAM
• Adapter screen resolution must be set to 800 x 600
with 32-bit color
14-08-104-9333A6-revB.indd 4 8/13/2014 11:04:00 AM

5
Note: Install the driver on your computer before connecting
the display adapter(s).
1. Insert the driver CD into your computer’s CD-ROM drive.
The setup program should run automatically. If the setup
program fails to start on its own, open the CD and double-
click on the appropriate driver file.
Note:
• If you encounter a User Account Control popup,
choose to allow the installation to proceed. This
may require an administrator’s password. If you
encounter a driver signature dialog box, choose to
continue the installation.
• If a message stating “Display Link software for USB
display adapter is already up to date,” then the
necessary software for this unit is already installed,
and you can proceed to step 5.
2. Follow the prompts that appear to complete the process.
3. When this process is complete, you will need to restart your
computer to finish the installation.
4. After restarting your computer, connect the included USB
cable from an available USB 2.0 or 3.0 port to the display
adapter.
5. Connect your display adapter to a monitor using an HDMI,
DVI or VGA cable, depending on your adapter/monitor
connection type.
2. Installation
14-08-104-9333A6-revB.indd 5 8/13/2014 11:04:00 AM

6
2. Installation
6. Once connected, the computer will recognize the display
adapter, and complete the installation. The video should
now be displayed on the add-on monitor. Note: It may
take a few moments before the screen appears on
the add-on monitor. Also, it is normal for the screen to
flicker on and off a few times when first connected. If
the add-on monitor remains blank, you may need to
restart your computer one more time.
Using Multiple Display Adapters
When using multiple display adapters, it is only necessary
to install the driver software once. After connecting the first
display adapter to the computer, simply move on to connecting
the next display adapter.
Note: When using Windows Vista XDDM mode, only
one display adapter will be able to be configured
to use Extended mode, and the remaining display
adapters will be forced to use Mirror mode. Windows
Vista XDDM mode is a video card driver mode that
provides a Windows XP interface on a Vista computer.
14-08-104-9333A6-revB.indd 6 8/13/2014 11:04:00 AM

7
3. Using the Adapter
3.1 Display Properties
Once installed, the computer video can be Extended from the
primary display to the add-on display, Mirrored to display the
same thing on both, or changed to use the add-on display as
the primary display. This can be done by opening the Display
Settings page on your computer (see below) and changing the
settings.
To access the display settings, right-click on your computer’s
desktop, and select the Properties or Personalize option,
depending on your Windows operating system. From there
you will need to access the Settings or Display option to get
to the Display Settings page. A quick way to access this page
is to use the display adapter icon in the lower-right corner of
your computer screen. Right-click on this icon and select the
DisplayLink Manager or Video Setup option to automatically
pull up your computer’s Display Settings page.
On page 8 are additional settings that are available via the
display adapter right-click menu. Note: The settings available
in this right-click menu may vary depending on your operating
system.
14-08-104-9333A6-revB.indd 7 8/13/2014 11:04:00 AM

8
3. Using the Adapter
Option Description
DisplayLink
Manager
Opens an “About” screen that shows the DisplayLink driver
version installed on your computer.
Check for
Updates
Connects to the internet and checks for newer versions of
the DisplayLink software, and downloads them if available.
USB 3.0
Adapter
Depending on the connected adapter, this will display
as either USB 3.0 to HDMI or DVI, and provides a list
of settings when selected. When multiple adapters are
connected, a separate menu option will be available for
each one.
• Screen Resolution – Click this option to bring up a list
of available screen resolutions for the add-on monitor.
Select the desired resolution from this list.
• Screen Rotation – This setting allows you to rotate the
screen according to your desired orientation.
• Extend To – This setting allows you to select which
direction to extend the add-on monitor to; Right, Left,
Up, Down.
• Set as Main Monitor – This setting allows you to make
the add-on monitor the primary display.
• Notebook Monitor Off – This setting appears on laptop
computers only, and allows you to turn off the laptop
monitor, leaving only the add-on monitor displayed.
• Mirror – This setting allows you to mirror the video of
the primary display to your add-on monitor, so that the
same thing is displayed on both screens.
• Off – This setting turns off the add-on monitor.
• Optimize for Video – When playing video content on
an add-on monitor, this setting can help to improve
playback performance. Note: Text may appear less clear
when this is enabled.
• Fit to TV – When using your display adapter to connect
a TV to your computer, the desktop may not always
completely appear on the screen. This setting can be
used to adjust the picture to display properly.
Audio Setup Opens your computer's sound settings screen.
Note: This function only works in specific models.
Video Setup Opens your computer’s display settings screen.
14-08-104-9333A6-revB.indd 8 8/13/2014 11:04:01 AM

9
In addition to the display adapter right-click menu, Windows
Vista and 7 users can press the [Windows Key] and the [P]
key at the same time to pull up the menu below, which quickly
allows you to switch the display settings.
Note: Only Mirror mode is supported under Windows Vista
Display Driver Model (WDDM) mode. In addition, the
Aero Experience (Flip 3D effect) will be disabled under
Windows Vista Display Driver Model (WDDM) mode as
long as the display adapter is connected.
3.2 Extending Video to the Add-On Display
To extend the video of the primary monitor to the add-on
monitor, follow the steps below:
1. Open your computer’s Display Settings page.
2. Select the monitor icon that represents the add-on display
you wish to change, or choose the add-on display from the
drop-down menu. The primary display is always icon 1.
3. Once you’ve selected the monitor icon for the add-on
display, check the checkbox to extend video onto the
monitor, or select the extension option from the drop-down
list.
4. Drag the monitor icons in the Display Settings page so that
they are positioned to replicate the location of the actual
displays. For example, if display 1 is directly to the left of
display 2, the monitor icons should be positioned that way.
This affects which side of the screen the mouse is allowed
to move to the next display from, and is therefore essential
to ensure smooth mouse movement between displays.
3. Using the Adapter
14-08-104-9333A6-revB.indd 9 8/13/2014 11:04:01 AM

10
5. Click the Apply button to activate the changes. The
computer video will now be extended from the primary
display to the add-on display.
Note: When playing a DVD, it is recommended that
you play the DVD on a monitor connected to the
computer via standard cabling, and not an add-on
monitor connected via display adapter. If you need
to play a DVD on an add-on monitor, you must have
a 2.0GHz Core Duo CPU with 1GB of RAM, and the
screen resolution must be set to 800 x 600 with 32-bit
color. If multiple display adapters are connected to a
computer, only 1 of them can play DVD content.
3. Using the Adapter
3.3 Mirroring Video on the Add-On Display
To show the same image on both the primary and add-on
displays, follow the steps below:
1. Open your computer’s Display Settings page.
2. Select the monitor icon that represents the add-on display
you wish to change, or choose the add-on display from the
drop-down menu. The primary display is always icon 1.
3. Un-check the box next to Extend the desktop onto this
monitor, or select the option from the drop-down menu to
duplicate the display, and then click the apply button.
Note: In Mirror mode, the add-on display settings are
limited by those of the primary display. If the primary
display only supports a resolution of 1280 x 1024, the
add-on monitor will be limited to a resolution of
1280 x 1024 or less.
14-08-104-9333A6-revB.indd 10 8/13/2014 11:04:01 AM

11
3. Using the Adapter
3.4 Making the Add-On Display
the Primary Display
To make the add-on display the primary display for the
computer, follow the steps below:
1. Open your computer’s Display Settings page.
2. Select the monitor icon that represents the add-on display
you wish to change, or choose the add-on display from the
drop-down menu. The primary display is always icon 1.
3. Check the box next to This is my main monitor and click the
Apply button to make the add-on display the primary display
for the computer.
Note:
• Some computers require you to first un-select the
original primary display before setting a new primary
display.
• Once set as the primary display, the add-on display
will continue to be the primary display as long as it
is connected to the computer. Once disconnected,
the primary display will default back to the monitor
connected to the computer via standard cable.
14-08-104-9333A6-revB.indd 11 8/13/2014 11:04:01 AM

12
Q: Why is the display on the add-on monitor blank?
A: If the monitor power LED is Green, wait a moment for the
monitor to display the video, as it may take some time for
the video to be displayed on the add-on monitor. If after
a few minutes the video does not display, restart your
computer. Also, make sure the computer is not in standby
or hibernation mode, which will cause the add-on monitor
to be blank.
If the monitor power LED is Red, check if the connection
is properly made. If the connection is fine and the problem
still exists, uninstall the driver, unplug the adapter and
reinstall the driver.
Q: Why is the add-on monitor flickering?
A: This is usually caused by a low refresh rate. When in “Mirror
Mode,” increase the refresh rate of the main monitor. This
will in turn increase the refresh rate of the add-on monitor,
which should stop the flickering. When in “Extended Mode,”
increase the refresh rate of the add-on monitor.
Q: When I play a MPEG file on Windows Media Player on
the extended monitor, why does the display become
abnormal when I switch it to full screen mode?
A: If your system is Windows XP SP1, upgrading to SP2 will
solve this problem.
4. Troubleshooting
14-08-104-9333A6-revB.indd 12 8/13/2014 11:04:01 AM

13
4. Troubleshooting
Q: Why does the video not display properly when in “Full-
Screen” mode?
A: Try the following tips to improve the smoothness of the
movie playback:
• Reduce the resolution of the display to 640 x 480 or
800 x 600.
• Use the adapter in extended mode.
• Terminate any other CPU intensive applications running
on the computer.
• As some media players require DirectX hardware support
to correctly operate, try a different media player which
requires less DirectX support.
• Drag the media player to the add-on screen and close
the player. Restart the player and it should open on the
add-on monitor. Now try playing the media file again.
• Try reducing the hardware acceleration level of the
primary display (NOT the add-on monitor) to level 1,
2 or 3 and restarting the media player. The hardware
acceleration can be found by right-clicking on your
desktop and click “Properties > Settings > Advanced >
Troubleshoot.”
• The video playback may be unusual when the add-on
monitor is mirroring the primary display and there is
another extended screen connected to the computer. The
extended screen must be disabled before the content will
be correctly cloned to the add-on monitor.
Q: In “Extended Mode,” why does the add-on monitor
have a black border around the desktop?
A: This happens when the resolution used by the add-on
monitor is higher than the resolution used by the primary
monitor. To solve this problem, configure the add-on
monitor to use the same resolution as the primary monitor.
14-08-104-9333A6-revB.indd 13 8/13/2014 11:04:01 AM

14
Q: In “Extended” mode, why does the cursor disappear?
A: If you’re in extended mode but have not yet connected the
add-on monitor, the desktop will still pan to the add-on
monitor. It’s possible that your cursor has moved to the
extended desktop and is no longer visible on the primary
display.
When this occurs, try the following:
• Connect the add-on monitor to the display adapter.
You should be able to see the mouse cursor once the
computer screen is displayed.
• Move your mouse to try and drag the cursor back onto
the primary monitor.
• Unplug the display adapter from the computer to restore
the cursor.
4. Troubleshooting
14-08-104-9333A6-revB.indd 14 8/13/2014 11:04:01 AM

15
5. Specifications
Feature Specification
Source Connector USB A Male (via the included or attached
USB cable)
Display Connector HDMI F, DVI-I F or HD15 F
Maximum Number of
Display Adapters 6 (Windows)
RAM 512 MB DDR2 SDRAM
Power Bus-powered (340 mA operating power)
Supported Operating
Systems
Windows®XP (32-bit), Vista (32- and 64-bit),
7 (32- and 64-bit), 8 (32- and 64-bit), and
8.1 (32- and 64-bit)
Operating Temperature 10° to 40° C (50° to 104° F)
Storage Temperature -10° to 80° C (14° to 176° F)
Relative Humidity Less than 85%, Non-Condensing
Supported Video
Resolutions (Note:
Interlaced and reduced
blanking modes are not
supported)
Resolution
16-Bit
Refresh Rate
32-Bit
Refresh Rate
640 x 480 60, 72, 75, 85 60, 72, 75, 85
800 x 600 56, 60, 72,
75, 85
56, 60, 72,
75, 85
1024 x 768 60, 70, 75, 85 60, 70, 75, 85
1280 x 720
(720p) 60 60
1280 x 768 60, 75, 85 60, 75, 85
1280 x 800 60 60
1280 x 1024 60, 75, 85 60, 75
1366 x 768 60 60
1400 x 1050 60, 75, 85 60, 75, 85
1600 x 1200 60 60
1680 x 1050 60 60
1920 x 1080
(1080p) 60 60
1920 x 1200 60 60
2048 x 1152 60 60
14-08-104-9333A6-revB.indd 15 8/13/2014 11:04:01 AM

16
6. Warranty and
Product Registration
1-Year Limited Warranty
Tripp Lite warrants its products to be free from defects in materials and workmanship
for a 1-year period from the date of retail purchase by end user.
Tripp Lite’s obligation under this warranty is limited to repairing or replacing (at its
sole option) any such defective products. To obtain service under this warranty you
must obtain a Returned Material Authorization (RMA) number from Tripp Lite or an
authorized Tripp Lite service center. Products must be returned to Tripp Lite or an
authorized Tripp Lite service center with transportation charges prepaid and must be
accompanied by a brief description of the problem encountered and proof of date
and place of purchase. This warranty does not apply to equipment which has been
damaged by accident, negligence or misapplication or has been altered or modified
in any way, including opening of the unit’s casing for any reason. This warranty
applies only to the original purchaser who must have properly registered the product
within 10 days of retail purchase.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied
warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to
the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR
DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE. Specifically, Tripp Lite is not liable for any costs, such as lost profits
or revenue, loss of equipment, loss of use of equipment, loss of software, loss of
data, costs of substitutes, claims by third parties, or otherwise.
Warranty Registration
Visit www.tripplite.com/warranty to register your new Tripp Lite product. You’ll be
automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See
website for details.
Warning!
Use of this equipment in life support applications where failure of this equipment
can reasonably be expected to cause the failure of the life support equipment or
to significantly affect its safety or effectiveness is not recommended. Do not use
this equipment in the presence of a flammable anesthetic mixture with air, oxygen
or nitrous oxide.
14-08-104-9333A6-revB.indd 16 8/13/2014 11:04:01 AM

17
6. Warranty and
Product Registration
FCC Notice, Class B
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications to this equipment not expressly approved by Tripp Lite
could void the user’s authority to operate this equipment.
WEEE Compliance Information for Tripp Lite Customers and Recyclers
(European Union)
Under the Waste Electrical and Electronic Equipment (WEEE) Directive and
implementing regulations, when customers buy new electrical and electronic
equipment from Tripp Lite they are entitled to:
• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies
depending on the country)
• Send the new equipment back for recycling when this ultimately becomes
waste
Tripp Lite follows a policy of continuous improvement. Product specifications are
subject to change without notice.
14-08-104-9333A6-revB.indd 17 8/13/2014 11:04:01 AM

18
14-08-104-9333A6-revB.indd 18 8/13/2014 11:04:01 AM

19
14-08-104-9333A6-revB.indd 19 8/13/2014 11:04:01 AM

20 14-08-104 93-33A6_RevB
1111 W. 35th Street, Chicago, IL 60609 USA
www.tripplite.com/support
14-08-104-9333A6-revB.indd 20 8/13/2014 11:04:03 AM