Tripp Lite SRCOOL7KRM User manual

Ideal for enclosures with perforated doors (not for use in enclosures with solid/plexiglass/glass doors)
Install the unit using a bottom-mounting configuration only, with the enclosure’s floor open and no tray or pan
below the SRCOOL7KRM
Evaporator coils can be vented through enclosure’s rear perforated doors or optional SRCOOL7KDUCT (no
solid doors)
In an open frame application, cooling air delivered to the equipment is lessened, since cold air escapes into
the room. Condenser must be ducted using the SRCOOL7KDUCT.
SmartRack Rack-Mounted Server Rack Cooling Unit
- 7,000 BTU, 120V
MODEL NUMBER: SRCOOL7KRM
Description
The SRCOOL7KRM Rack-Mounted Server Rack Air Conditioner pumps 7,000 BTU/h (2.0 kW) of close-coupled cooling power into your IT equipment to
prevent shutdowns, malfunctions and failures caused by overheating. This space-saving, energy-efficient unit is perfect for data centers, server rooms,
network closets and other environments with heat-sensitive rack-mounted equipment and limited floor space.
The self-contained SRCOOL7KRM mounts just like any other rack equipment in 8U of space at the bottom of a rack enclosure. A magnetic air dam attaches to
the front door of the rack enclosure to ensure that equipment draws cool air from the SRCOOL7KRM instead of drawing warm air from the room. Because it
only cools the equipment inside the rack enclosure, the SRCOOL7KRM is much more efficient than solutions that cool an entire room to achieve the same
result. The SRCOOL7KRM filters the air, and its built-in evaporator eliminates condensation, as well as the need for a floor drain or water collection tank.
The 7-foot cord plugs into a standard 15A (NEMA 5-15R) outlet. The unit restarts automatically after power failures, and you can use the built-in timer to
schedule unattended shutdown and startup. The intuitive control panel includes a digital display and diagnostic LEDs to communicate operating conditions at a
glance.
The optional SRCOOLNET2 remote management accessory (sold separately) allows you to monitor temperatures, receive alerts, review logs and control
settings over the Ethernet network from any location via SNMP, Web, SSH or telnet. The SRCOOLNET2 accessory also includes an ENVIROSENSE®
temperature and humidity sensor that allows you to link cooling output with temperature readings up to 12 feet away.
Features
Compact and Efficient Cooling
Highlights
Saves valuable floor space in IT
environments
Saves energy with efficient
close-coupled cooling
Provides 7,000 BTU/h (2.0 kW) of
cooling capacity
Supports optional remote
management via Ethernet
Mounts at the bottom of an
EIA-standard 19 in. rack
Package Includes
SRCOOL7KRM SmartRack
Rack-Mounted Server Rack
Cooling Unit - 7,000 BTU, 120V
Magnetic air dam kit
Directional output vent
Mounting hardware
Owner’s manual
1 / 4

Compact and Efficient Cooling
Saves valuable floor space in IT environments with available space at the bottom of a rack
Saves energy with efficient close-coupled cooling, cooling only the equipment inside the rack enclosure instead of the entire room
Provides 7,000 BTU/h (2.0 kW) of cooling capacity in a rack-mounted 8U chassis
Prevents equipment shutdowns, malfunctions and failures caused by overheating and temperature fluctuations
Uses environmentally friendly R410A refrigerant
Convenient Operation
Directional output vent aims air upward to cool overheated rack equipment
Supports unattended shutdown and startup, including automatic restarts after power failures
Intuitive front-panel controls with an informative digital display and diagnostic LEDs
Operates at noise levels comparable to an average office setting
Remote Management Support
Optional SRCOOLNET2 remote management accessory (sold separately) allows you to monitor temperatures, receive alerts, review logs and control
settings over the Ethernet network from any location via SNMP, Web, SSH or telnet
SRCOOLNET2 includes ENVIROSENSE temperature and humidity sensor that allows you to link cooling operation with temperature readings up to 12 ft.
away
Optional SRCOOL7KDUCT Exhaust Duct Kit
Directs and disperses heat from SRCOOL7KRM through an upper vent into your facility’s ventilation system
Sold separately
Easy Installation
Plugs into a standard 15A outlet (NEMA 5-15R)
Built-in evaporator eliminates condensation—no floor drain or water collection tank needed
Magnetic air dam attaches to rack enclosure’s front door to optimize airflow
Includes mounting hardware for installation at bottom of EIA-standard 19 in. rack enclosures
Specifications
INPUT
Nominal Input Voltage(s) Supported 120V AC
Electrical Consumption 1020 Watts Max
Input Connection Type NEMA 5-15P
Input Cord Length (ft.) 7
Input Cord Length (m) 2.13
Input Frequency 60 Hz
USER INTERFACE, ALERTS & CONTROLS
Front Panel LCD Display 2-digit LCD displays numerical temperature readout
2 / 4

Front Panel LEDs Push-button control panel with multiple LEDs for operational configuration
PHYSICAL
Rack Height (U Spaces) 8
Shipping Dimensions (hwd / in.) 23.4 x 22.8 x 27.7
Shipping Dimensions (hwd / cm) 59.4 x 58 x 70.4
Shipping Weight (lbs.) 77.2
Shipping Weight (kg) 34.74
Unit Dimensions (hwd / in.) 13.9 x 17.35 x 22.52
Unit Dimensions (hwd / cm) 35.3 x 44.1 x 57.2
Unit Weight (lbs.) 61.6
Unit Weight (kg) 27.94
Color Black
Form Factors Supported Rackmount
ENVIRONMENTAL
Cooling Capacity 7,000 BTU / 2.0 kW
COMMUNICATIONS
SNMP Compatibility SRCOOLNET2(Optional) remote management accessory for remote monitoring and control
SPECIAL FEATURES
Dehumidifier 1.25L / hour
Compressor Type Rotary
Refrigerant R410a (Environmentally friendly, Non ozone depleting)
Refrigerant Amount 18.7 ounces
Air Flow 198.25 CFM
Amp Draw Nominal 8.5
Sound Level (Noise) 57dbA
CERTIFICATIONS
Certifications Tested to UL484; CSA, RoHS; NOM
WARRANTY
3 / 4

Product Warranty Period (Worldwide) 1-year limited warranty
© 2017 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
https://www.tripplite.com/products/product-certification-agencies
4 / 4