Tripp Lite U223-004-IND User manual

1
Owner’s Manual
Industrial USB 2.0 Hub
Model:
U223-004-IND (4-Port)
Warranty
Registration:
register online today for a
chance to win a FREE Tripp Lite
product—www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2012 Tripp Lite. All rights reserved. All trademarks are the property of their respective owners.
Safety Instructions 2
Features 3
System Requirement 3
Package Contents 3
Powering the Hub 4
Mounting Kit Installation 5
Specifications 6
Warranty & Warranty Registration 6
201205147 93-3218.indd 1 5/31/2012 9:48:33 AM

2
Before attempting to connect, operate or adjust this product, please
save and read the Owner's Manual completely.
Safety Instructions
Always read the safety instructions carefully:
• Keep this Owner’s Manual for future reference
• Keep this equipment away from humidity
• If any of the following situations arise, get the equipment checked by
a service technician:
º
The equipment has been exposed to moisture.
º
The equipment has been dropped and damaged.
º
The equipment has obvious sign of breakage.
º
The equipment has not been working well or you cannot get it to
work according to the Owner’s Manual.
201205147 93-3218.indd 2 5/31/2012 9:48:33 AM

3
Features
• Compliant with USB 2.0 specication, Hi-Speed USB data
transmission rate up to 480 Mbps
• Bus-power (no external power adapter required) and self-power
mode selection
• Dual power input (AC or DC) supply
• Plug-and-Play; no software required
• Over-current detection and protection circuit design
• ESD protected to ± 15 kV
• Automatic link and speed detection
• Industrial-grade rugged metal enclosure design
• DIN rail mount and wallmount support
System Requirement
• Compatible with all USB-enabled operating systems
Package Contents
• U223-004-IND
• USB cable x1
• 3-pin power terminal block
• DIN mounting hardware x1
• Wallmount hardware
201205147 93-3218.indd 3 5/31/2012 9:48:33 AM

4
Powering the Hub
To power the hub, plug the user-supplied power adapter into the wall outlet.
DC-In
Power terminal
To power the hub using a power terminal, plug the supplied power
terminal block into the hub according to the connector’s orientation.
201205147 93-3218.indd 4 5/31/2012 9:48:34 AM

5
Mounting Kit Installation
This hub can be placed on a at surface, mounted on a wall or attached
to a standard DIN-Rail. To mount the hub to a DIN-Rail, please follow
the steps below.
Note: The description below is an example due to the various DIN
mounting modules and conditions.
Figure A
Step 1: Fasten the included DIN
rail hardware to the side of the
unit using the screws provided in
the packaging (See Figure A).
Step 2: Afx the hub to your DIN rail
To wallmount the hub, fasten the included mounting brackets to the bottom
of the unit, with the wallmount holes sticking out. You can then wallmount
the hub accordingly.
Notice
• Prior to connecting the hub, it is recommended that you rst install
your USB device drivers. This will ensure your device will be recognized
upon connecting it to the hub.
• The transmission rate is up to 480Mbps when connecting the hub to
a USB 2.0 port.
201205147 93-3218.indd 5 5/31/2012 9:48:35 AM

6
Warranty & Warranty Registration
1-Year Limited Warranty
TRIPP LITE warrants its products to be free from defects in materials and workmanship for
a period of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this
warranty is limited to repairing or replacing (at its sole option) any such defective products.
To obtain service under this warranty, you must obtain a Returned Material Authorization
(RMA) number from TRIPP LITE or an authorized TRIPP LITE service center. Products must be
returned to TRIPP LITE or an authorized TRIPP LITE service center with transportation charges
prepaid and must be accompanied by a brief description of the problem encountered and
proof of date and place of purchase. This warranty does not apply to equipment, which has
been damaged by accident, negligence or misapplication or has been altered or modied
in any way.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Some states do not permit limitation or exclusion of implied warranties; therefore, the
aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.
Specifications
Item Description
Ports 4 x USB2.0
ESD Protection 15KV ESD
Transmission Speed 12M~480Mbps
Power Requirement Bus-power/5V 3A DC/9~36V DC
Operating Temperature 0°C to 60°C (32°F to 140°F)
Operating Humidity 5 to 95% RH
Dimension (LxWxH) 142 x 63.6 x 24.6 mm (5.6 x 2.5 x 1 in)
Enclosure Material Metal
Regulatory Approvals
FCC/CE
Specication is subject to change without further notice.
201205147 93-3218.indd 6 5/31/2012 9:48:35 AM

7
Warranty & Warranty Registration continued
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS
PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specically, TRIPP LITE
is not liable for any costs, such as lost prots or revenue, loss of equipment, loss of use of
equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.
Use of this equipment in life support applications where failure of this equipment can
reasonably be expected to cause the failure of the life support equipment or to signicantly
affect its safety or effectiveness is not recommended. Do not use this equipment in the
presence of a ammable anesthetic mixture with air, oxygen or nitrous oxide.
FCC Notice, Class B
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modications to this equipment not expressly approved by Tripp Lite
could void the user’s authority to operate this equipment.
201205147 93-3218.indd 7 5/31/2012 9:48:35 AM

8
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
201205147 • 933218-EN
Warranty & Warranty Registration continued
WEEE Compliance Information for Tripp Lite Customers and
Recyclers (European Union)
Under the Waste Electrical and Electronic Equipment (WEEE) Directive and
implementing regulations, when customers buy new electrical and electronic
equipment from Tripp Lite they are entitled to:
• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies
depending on the country)
• Send the new equipment back for recycling when this ultimately becomes waste
WARRANTY REGISTRATION
Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product.
You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Tripp Lite follows a policy of continuous improvement. Product specications are subject to
change without notice.
201205147 93-3218.indd 8 5/31/2012 9:48:35 AM