Tripp Lite N286-01GLCLHSMD User manual

1
Quick Start Guide
1111 W. 35th Street, Chicago, IL 60609 USA
tripplite.com/support
Copyright © 2019 Tripp Lite. All rights reserved.
1000Base-LX/LH SFP Transceiver
with DDM, SMF, 1310 nm,
10 km, LC – Cisco GLC-LH-SMD
Compatible
Model: N286-01GLCLHSMD
WARRANTY REGISTRATION
Register your product today and be automatically entered to
win an ISOBAR surge protector in our monthly drawing!
tripplite.com/warranty
Este guía esta disponible en español en la página de
Tripp Lite: tripplite.com/support
Ce guide est disponible en français sur le site Web de
Tripp Lite : tripplite.com/support
Русскоязычная версия настоящего краткого
руководства представлена на веб-сайте компании
Tripp Lite по адресу: tripplite.com/support

2
Product Features
Package Includes
• 1000Base-LX/LH transceiver supports data
transfer rates up to 1.25 Gbps
• Transmission distance up to 6 mi. (10 km)
when using 8.3/125 singlemode fiber
cabling
• Compliant with Common Management Spec
SFF-8472 and SFF-MSA
• Supports Digital Diagnostic Monitoring
(DDM)
• Full-metal housing emits low EMI
• Hot-pluggable
• Cisco switch compatible
• N286-01GLCLHSMD
• Quick Start Guide

3
Optional Accessories
Installation
• N370-Series Duplex Singlemode 8.3/125 LC
Fiber Cables
• P999-000 Anti-Static Wrist Strap
Notes:
• SFP transceiver modules are static-sensitive
devices that require proper handling. An anti-static
ESD wrist strap or similar device should always be
used when handling a transceiver module.
• The transceiver module should never be installed
with cables already connected. Always remove
cables prior to installation to avoid damaging the
cable, cable connectors, and/or optical interface.
• Installing and uninstalling the transceiver module
numerous times will shorten its useful lifespan. Do
not uninstall and reinstall the module more than is
absolutely necessary.
1. Remove the transceiver module from its
packaging. Make sure to leave the dust plug
inserted in the LC optical bores.

4
Installation
2. Gently insert the transceiver module into the
module socket of your device. Press the dust
plug until it locks into place.
3. Verify the transceiver module is locked into
place by trying to remove it from the module
socket without releasing the latch. If it stays
in place, it is seated properly. If not, reinsert
it, firmly pressing on the dust plug until it
locks into place.
4. Once you have verified the transceiver
module is securely locked in place, remove
the dust plug from the LC optical bores and
connect your cabling.
Note: Save the dust plug so it can be used in the
event the transceiver module needs to be uninstalled
and reinstalled.

5
Specifications
Industry Standards IEEE 802.3z Fiber Optic
Gigabit Ethernet
Connector Type LC Duplex
Maximum Data Transfer
Rate
1.25 Gbps
Maximum Transmission
Distance
6 mi. (10 km) using
8.3/125 ~ 10/125 SMF
Cabling
Wavelength 1310 nm
Fiber Operating Mode Half/Full Duplex
DDM (DOM) Support Yes
Dimensions [H x W x D] 2.2 x 0.5 x 0.5 in
(55 x 13 x 12 mm)
Weight 0.5 oz. (15 g)
Operating Temperature 32°F to 158°F
(0 to 70°C)
Storage Temperature -40°F to 185°F
(-40 to 85°C)
Relative Humidity 5 to 85%, Non-Condensing
Maximum TX Power -3 dB
Minimum TX Power -9 dB
Sensitivity -20 dB
Power Budget 11 dB
Power Requirement 3.3V
Power Consumption 1.0 Watt (Max)

6
Warranty and
Product Registration
3-Year Limited Warranty
Seller warrants this product, if used in accordance with all
applicable instructions, to be free from original defects in material
and workmanship for a period of 3 years from the date of initial
purchase. If the product should prove defective in material or
workmanship within that period, Seller will repair or replace the
product, at its sole discretion. Service under this Warranty can
only be obtained by your delivering or shipping the product (with all
shipping or delivery charges prepaid) to: Tripp Lite, 1111 W. 35th
Street, Chicago, IL 60609 USA. Seller will pay return shipping
charges. Visit tripplite.com/support before sending any equipment
back for repair.
THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO
DAMAGE RESULTING FROM ACCIDENT, MISUSE, ABUSE OR
NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER
THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT
TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED
WARRANTIES, INCLUDING ALL WARRANTIES OF MERCHANTABILITY
OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD
SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES
ALL INCIDENTAL AND CONSEQUENTIAL DAMAGES. (Some states
do not allow limitations on how long an implied warranty lasts, and
some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusions may
not apply to you. This Warranty gives you specific legal rights, and
you may have other rights which vary from jurisdiction to jurisdiction).
WARNING: The individual user should take care to determine prior
to use whether this device is suitable, adequate or safe for the use
intended. Since individual applications are subject to great variation,
the manufacturer makes no representation or warranty as to the
suitability or fitness of these devices for any specific application.

7
Warranty and
Product Registration
PRODUCT REGISTRATION
Visit tripplite.com/warranty today to register your new Tripp Lite
product. You’ll be automatically entered into a drawing for a chance
to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions
apply. See website for details.
FCC Notice, Class B
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications to this equipment not expressly
approved by Tripp Lite could void the user’s authority to operate this
equipment.

8
Warranty and
Product Registration
WEEE Compliance Information for Tripp Lite Customers and
Recyclers (European Union)
Under the Waste Electrical and Electronic Equipment (WEEE)
Directive and implementing regulations, when customers buy
new electrical and electronic equipment from Tripp Lite they
are entitled to:
• Send old equipment for recycling on a one-for-one, like-for-
like basis (this varies depending on the country)
• Send the new equipment back for recycling when this
ultimately becomes waste
Tripp Lite has a policy of continuous improvement. Product
specifications are subject to change without notice.
1111 W. 35th Street, Chicago, IL 60609 USA
tripplite.com/support
19-09-133 93-3B3E_RevA