Tripp Lite SmartOnline SU2200XLA User manual

Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +[phone]
E-mail: [email protected]
Model #: SU2200XLA
SmartOnline 2.2kVA On-Line Double-Conversion UPS, Tower, 110/120V NEMA outlets
Highlights
2200VA / 2.2kVA / 1600 watt on-line double-conversion tower UPS
110/120V +/-2% output at 50/60Hz, high efficiency economy mode option
Expandable runtime, Hot-swappable battery modules
USB, RS232 & EPO ports; support for SNMP/WEB card options
Front panel status LEDs with detailed load and battery metering
2 independently switchable output load banks
NEMA 5-20P input; L5-20R & 5-15/20R outlets
Description
Tripp Lite's Smart Online SU2200XLa on-line, double conversion UPS protects critical server, networking or telecommunications equipment from
blackouts, brownouts, voltage fluctuations and surges in an attractive all-black upright tower form factor. Large capacity 2200VA/1600W UPS
continuously converts incoming AC to DC, then back to perfect sine wave AC output at 120V AC (+/-2%). Removes harmonic distortion, fast
electrical impulses, frequency fluctuations and other hard-to-solve power problems not addressed by other UPS systems. True sine wave output and
zero transfer time offers guaranteed compatibility with all equipment types. Includes 7 UPS supported outlets. 2 three-outlet load banks can be
independently controlled via software interface to selectively reboot remote equipment or automatically shed less critical loads to extend battery
runtime for the most critical equipment. Battery support can be extended with the addition of external battery packs. Includes slot for internal
SNMP/web card, plus DB9 enhanced serial monitoring port for unattended shutdown, remote control and monitoring of UPS system and power
data. Network management interfaces support simultaneous communications via USB port, DB9 serial port and SNMPWEBCARD slot.
HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Includes
Tripp Lite's PowerAlert UPS Power Management Software. Compatible with Tripp Lite's Watchdog Service Monitoring and Control Software.
Package Includes
SU2200XLa On-line Double-Conversion UPS System
PowerAlert Software and cabling
Instruction manual with warranty information
EPO (Emergency Power Off) cabling
Features
True on-line, double conversion UPS provides a constant, pure sine wave AC output
Maintains continuous operation through blackouts, brownouts, voltage fluctuations and surges with zero transfer time
Zero transfer time, on-line, double-conversion and economy-mode operation supported
Removes harmonic distortion, electrical impulses, frequency variations and other hard-to-solve power problems
Accepts input voltages between 80V and 150V (65V to 150V at loads under 70%), regulating output to 120V AC +/-2%
2200VA/1600W output capacity with 7 total outlets (6 NEMA5-15/20R and 1 L5-20R)
Two built-in individually switchable load banks, each with three outets, can be controlled via software interface to selectively reboot remote
equipment or automatically shed less critical loads to extend battery runtime for the most critical equipment
Standard internal battery set provides 14 min. runtime at half load and 4.5 min. at full load
Runtime is expandable with BP48V24-2U (limit 1) or BP48V60RT3U (multi-pack compatible) external battery packs

Runtime is expandable with BP48V24-2U (limit 1) or BP48V60RT3U (multi-pack compatible) external battery packs
Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual)
Attractive all-black upright tower format
Simultaneous communications via HID-compliant USB port, serial port, and SNMP/web card slot
HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
DB9 serial network interface supports RS-232 and contact closure messaging
Slot for optional SNMP/web card (part #: SNMPWEBCARD)
Included PowerAlert UPS Power Management Software and cabling provides monitoring of in-depth site power conditions, full UPS status
and fault warnings, output load level and load bank power control
Compatible with Tripp Lite's WatchDog Service Monitoring and Control Software (part# WATCHDOGSW)
Fault tolerant electronic bypass maintains utility output during a variety of UPS fault conditions
Diagnostic LEDs
$250,000 Ultimate Lifetime Insurance coverage for conbnected equipment(USA and Canada Only)
Specifications
OUTPUT
Output Volt Amp
Capacity (VA)
2200
Output kVA capacity
(kVA)
2.2
Output Watt Capacity
(watts)
1600
Output kW capacity 1.6
Output power factor 0.7
Crest Factor 3:1
Nominal Output
Voltage(s) Supported
110V; 120V
Nominal Voltage details 120V default
Frequency
compatibility
50 / 60 Hz
Frequency
compatibility details
Output frequency matches input nominal on startup, defaults to 60 Hz on cold-start
Output voltage
regulation (line mode)
+/- 2%
Output voltage
regulation (Economy
line mode)
+/- 10%
Output voltage
regulation (Battery
mode)
+/- 2%
Built-in UPS output
receptacles
6 5-15/20R outlet(s); 1 L5-20R outlet(s)
Built-in controllable
switched load banks
Two switchable three-outlet 5-15/20R load banks
Output AC waveform
(AC mode)
Sine wave
Output AC waveform
(battery mode)
Pure Sine wave
INPUT

Rated input current (at
maximum load)
16A (120V), 17.6A (110V)
Nominal Input
Voltage(s) Supported
110V AC; 120V AC
UPS input connection
type
5-20P
Input circuit breaker 30A
UPS Input cord length
(ft.)
10
UPS Input cord length
(m)
3
Recommended
Electrical Service
20A 120V
BATTERY
Full load runtime
(minutes)
4.5 min. (1600w)
Half load runtime
(minutes)
14 min. (800w)
Expandable battery
runtime
Extended runtime supported via optional external battery packs
External battery pack
compatibility
BP48V24-2U (limit 1); BP48V60RT-3U (multi-pack compatible)
DC system voltage
(VDC)
48
Battery recharge rate
(included batteries)
Less than 5 hours from 10% to 90%
Replacement battery
cartridge (internal UPS
battery replacement)
RBC48-SUTWR
Battery Access Battery access door
Battery replacement
description
Hot-swappable, user replaceable batteries
VOLTAGE REGULATION
Voltage regulation
description
Online, double-conversion power conditioning
Overvoltage correction 2% output voltage regulation during overvoltages to 150
Undervoltage
correction
2% output voltage regulation during undervoltages to 80
Severe undervoltage
correction
2% output voltage regulation during undervoltages to 65 (under 70% load only)
LEDS ALARMS & SWITCHES
LED Indicators 14 LEDs indicate line power, online mode, economy/bypass mode, on-battery, overload, battery low, replace
battery and fault status information - includes 4-LED meter display for load and battery charge level
Alarms Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown
conditions
Alarm cancel operation Power-fail alarm can be silenced using alarm-cancel switch

Switches 2 switches control off/on power status and alarm-cancel/self-test operation
SURGE / NOISE SUPPRESSION
UPS AC suppression
joule rating
570
UPS AC suppression
response time
Instantaneous
UPS Dataline
suppression
1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet
EMI / RFI AC noise
suppression
Yes
PHYSICAL
Installation form
factors supported with
included accessories
Tower
Primary form factor Tower
UPS / Power Module
dimensions in primary
form factor (height x
width x depth / inches)
10.2 x 9 x 19.5
UPS / Power Module
dimensions in primary
form factor (height x
width x depth / cm)
26 x 22.9 x 49.5
UPS / Power Module
weight (lbs)
52.7
UPS / Power Module
weight (kg)
23.9
UPS Shipping
dimensions (height x
width x depth / inches)
15.2 x 13 x 24
UPS Shipping
dimensions (height x
width x depth / cm)
38.7 x 33 x 61
Shipping weight (lbs) 59.5
Shipping weight (kg) 27
UPS housing material Steel
Cooling method Fan
ENVIRONMENTAL
Operating Temperature
Range
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature
Range
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity 0 to 95%, non-condensing
AC mode BTU / hr. (full
load)
812.9
AC economy mode
BTU / hr. (full load)
347.2

Battery mode BTU / hr.
(full load)
885.6
AC economy mode
efficiency rating (100%
load)
94%
Audible Noise < 45 dB at front side 1m
COMMUNICATIONS
Communications
interface
USB (HID enabled); DB9 Serial; Contact closure; EPO (emergency power off); Slot for SNMP/Web interface
Network monitoring
port description
Supports detailed monitoring of UPS and site power conditions; DB9 port supports RS232 and contact closure
communications
PowerAlert software Included
Communications cable USB and DB9 cabling included
WatchDog compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applications
LINE / BATTERY TRANSFER
Transfer time No transfer time (0 ms.) in online, double-conversion mode
Low voltage transfer to
battery power (setpoint)
80V (100% load), 65V (
High voltage transfer
to battery power
(setpoint)
150
SPECIAL FEATURES
Cold Start (startup in
battery mode during a
power failure)
Cold-start operation supported
High availability UPS
features
Automatic inverter bypass; Hot swappable batteries
Green & high efficiency
features
High efficiency economy mode operation; Individually controllable load banks; Schedulable daily hours of
economy mode operation
CERTIFICATIONS
UPS Certifications Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI)
WARRANTY
Product Warranty
Period (Worldwide)
2-year limited warranty
Connected Equipment
Insurance (U.S.,
Canada & Puerto Rico)
$250,000 Ultimate Lifetime Insurance
Related Items
Optional Products
Product Type Related Model Description Qty.
Extended Warranties WEXT3-2200-3000 3-Year Extended Warranty - For Smart Line-Interactive and Online
Tower or Rack models, 2200-3000VA
1
Extended Warranties WEXT5-2200-3000 5-Year Extended Warranty - For Smart Line-Interactive and Online
Tower or Rack models, 2200-3000VA or less
1
External Battery Packs BP48V24-2U BP48V242U - External Battery Pack for UPS System 1

External Battery Packs BP48V60RT-3U External Battery Pack and Cable. 3U, Expandable, Blue 2-Point
Connector
1
Power Cables P007-006 6-ft. Heavy-Duty 14AWG Power cord
(IEC-320-C13 to NEMA 5-15P)
1
Power Cables P007-010 10-ft. Heavy-Duty 14AWG Power cord
(IEC-320-C13 to NEMA 5-15P)
1
Power Cables P044-06I 6-inch 12AWG Heavy Duty Power Adapter cord
(NEMA-L5-20R to NEMA-5-20P)
1
Power Cables P045-010 10-ft. 12AWG Heavy-Duty Power cord
(IEC-320-C19 to NEMA L5-20P)
1
Power Cables P049-010 10-ft. 12AWG Heavy Duty Power cord
(IEC-320-C19 to NEMA 5-20P)
1
Power Cables PDUNV Basic PDU / Power Distribution Unit - Safe, reliable power distribution
for critical networking equipment
1
Power Distribution PDU1220T Basic PDU / Power Distribution Unit - Safe, reliable power distribution
for critical networking equipment
1
Power Distribution PDUB20 Dual source Power Distribution Unit / PDU with Manual Transfer Switch
enables Hot-swappable UPS Replacement in Critical Network
Applications
1
Power Distribution PDUMH20 Metered PDU / Power Distribution Unit- Safe, reliable power
distribution with digital current meter
1
Power Distribution PDUMH20AT Metered PDU with ATS - Power Distribution Unit with dual-input Auto
Transfer Switching
1
Power Distribution PDUMH20ATNET Switched, Metered PDU with ATS - Power Distribution Unit with
dual-input Auto Transfer Switching, individual outlet control and SNMP
network interface
1
Power Distribution PDUMNH20 Monitored PDU / Power Distribution Unit supports real-time remote
monitoring of load level, voltage and frequency with options for remote
environmental and security monitoring
1
Power Distribution PDUMNV20 Monitored PDU / Power Distribution Unit supports real-time remote
monitoring of load level, voltage and frequency with options for remote
environmental and security monitoring
1
Power Distribution PDUMV20 Metered PDU / Power Distribution Unit - Safe, reliable power
distribution with digital current meter
1
Power Distribution PDUMV20NET Switched, Metered PDU with Remote Monitoring - 0U Vertical
Rackmount Power Distribution Unit for Networks with Individually
Switchable Outlets, Current Metering, Remote Monitoring and Control
1
Power Distribution PDUV20 Safe, reliable power distribution for critical networking equipment 1
Shutdown Cable Kits AS400CABLE KIT Power Management Tools - UPS Communication Cable Kit for System
i / AS400 / iSeries Servers
1
SNMP Accessories ENVIROSENSE Monitors temperature, humidity and contact-closure inputs. (Requires
SNMPWEBCARD or switched PDU.)
1
SNMP Accessories SNMPWEBCARD For remote monitoring and control via SNMP, Web, or Telnet. 1
UPS Accessories MODBUSCARD For remote monitoring and control via MODBUS protocol 1
UPS Accessories RELAYIOCARD Programmable Relay I/O Card 1
More information, including related products, owner's manuals, and additional technical specifications, can be found online at
www.tripplite.com/en/products/model.cfm?txtModelID=3594.
Copyright © 2012 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous
improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.