TrippNT 50100 User manual

Thank you for choosing TrippNT for your storage and organiza-
tion needs. Please check to make sure you received your cart in
good shape and all the necessary components are included. This
guide will show you step by step how to assemble your
Locking Cart (50100).
Assembly Guide (v.2.0)
Locking Cart (50100)
Included Components
If you need any assistance please call TrippNT at 1.800.874.7768 or email us at
[e-mail]. Also check out the video assembly guide
online at http://TrippNT.com/AssemblyAssistance
Cart BodyA.
Caster w/ Brake
x4
B.
Lock Washer
x4
F.
Propel Nut
x4
E.
Set of 2 keys
x1
D.
White Plastic Spacer
x4
G.
1 Pocket Tray
x6
C.
6
Replace the 1 Pocket Trays (C) and return the cart to the upright
position and it is ready for use. Enjoy your cart.
Care Instructions for your Cart
This product can be cleaned with a solution of water or with a mild organic
solvent . Use of strong solvents is not recommended.
Accessories and Replacement Parts
A variety of accessories and replacement parts are available at:
TrippNT.com/CartAccessories or from your normal TrippNT Distributor

Locking Cart (50100)
Installing the Casters
Front of Cart (A)
White Plastic
Spacer (G)
Bottom of Cart (A)
G
A
F
E
IMPORTANT CASTER INSTALLATION INSTRUCTIONS
Casters must be assembled correctly. The caster will stay on
tight if installed correctly.
B
Lock Washer - Should be between the
propel nut and the bottom of the cart.
Bottom of Cart
White Plastic Spacer - The grove in the
caster cover should fit snuggly to the hex
shape on the stem of the caster.
Caster
Propel Nut - Hand tighten propel nut
to the stem of the caster with shown
components in between. Nut should
be completely flush with surface
when adequately tightened. This does
require significant torque.
Lock the brake of
the caster so that the
wheel does not move
and the top of the
caster does not swivel.
Securely tighten the
caster in a clockwise
direction until the
caster is snug.
Remove all the 1 pocket trays (C) and Gently lay cart body (A) on its
back with the door facing up towards the ceiling.
Caster (B)
First disassemble each caster assembly.