TRIVIEW TFD-CSH26AI12 User manual

COLOR VERIFOCAL
DOME CAMERA
MODEL: TFD-CSH26AI12/TFD-CSH26AI2412
TFD-CSH38AI12/TFD-CSH38AI2412
Serial No:
OPERATING INSTRUCTIONS

-
1
-
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accom
p
an
y
in
g
the a
pp
liance
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the presence
of un-insulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.

NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to CE regulations. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. The equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
CE Caution: To assure continued compliance, (example – use only shielded
interface cables when connecting to computer or peripheral devices), any changes or
modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
-
2
-

The serial number of this product may be found on the top of the unit.
You should note the serial number of this unit in the space provided and retain
this instruction as a permanent record of your purchase to aid identification in
the event of theft.
WARNING: To prevent fire or electric shock hazard, do not expose this appliance to
rain or moisture.
The apparatus shall not be exposed to dripping or splashing and that no
objects filled with liquids, such as vases, shall be placed on the
apparatus.
-
3
-

MAIN FEATURES
1. Lead (Pb) Free RoHS Compliance
2. Equipped with Sony HQ1 DSP
3. 1 / 3 –inch color CCD camera designed for use in video surveillance system.
4. The camera features a super high picture quality of 525 TVL with varifocal
auto iris lens, and easy mounting on the ceiling or wall.
PRECAUTIONS
1. This product should be installed and serviced by qualified service personnel or
system installers.
2. Use UL listed Class 2 regulated power adapter supplying 12 Vdc to the camera.
3. To prevent fire or electric shock hazard, use a UL listed cable to connect the
power supply to the camera.
4. Be sure the ceiling or wall having enough strength to support this camera.
4

5. Do not attempt to disassemble the camera. To prevent electric shock, do not
remove screws or covers. There are no user-serviceable parts inside.
6. Handle the camera with care. Do not abuse the camera. Avoid striking, shaking,
etc. The camera could be damaged by improper handling or storage.
7. Do not use strong or abrasive detergents. Use a dry cloth to clean the camera
body when dirty. In case the dirt is hard to remove, use a mild detergent and
wipe gently. Afterwards, wipe off the remaining detergent with a dry cloth.
8. Clean the lens faceplate with care. Do not clean the lens with strong or abrasive
detergents. Use lens tissue or a cotton tipped applicator and ethanol.
9. Never face the camera towards the sun. Do not aim the camera at bright objects.
Whether the camera is in use or not, never aim it at the sun or other extremely
bright objects. Otherwise, blooming or smear may be caused.
10. Do not operate the camera beyond its specifications. Use the camera under
conditions where temperature is between –10C to 50C (14F to 122F), and
humidity is below 90%. The input power is 24 V AC or 12 V DC. (TFD-
CSH26AI12 and TFD-CSH38AI12 input 12Vdc/0.2A ±5%.)
-
5
-

MAJOR OPERATING CONTROLS AND THEIR FUNCTION
1. Camera Dome Base
2. Pan/Tilt Table Adjusts the pan and tilt angles of the camera.
3. Focus Lever Fasten the focus position after adjusting.
4. Zoom Lever Fasten the zoom position after adjusting.
5. Video Output Cable/Connector
Supplies the video output signals. The signals can be connected to a hand-held
daylight viewable 2.5” LCD service monitor TLM-0251i for adjusting the camera
image and loop-through this image to another monitor at the same time.
6. Power Cable/Connector
Supplies 24Vac or 12Vdc power (TFD-CSH26AI12 and TFD-CSH38AI12
input 12Vdc only) to camera from an external power source.
-
6
-

5 – Video cable
6 – Power cable
1 – Dome Base
2 – Pan/Tilt Table
4 – Zoom Lever
3 – Focus Lever
-
7
-

7. DC LEVEL ADJ: This VR is used for adjusting the iris level of an auto iris
lens.
8. AES/OFF Switch: (auto electronic shutter) When an auto iris lens is used,
the AES should be off. When a manual iris lens is used:
OFF: the shutter speed is1/60 sec (NTSC)
ON: the shutter speed will be adjusted automatically from 1/60 to 1/100,000
sec. The default setting is OFF.
9. BLC/OFF Switch: (back light compensation)
ON: Compensates the background if it is brighter than the object.
OFF: Does not compensate. The default setting is OFF.
10. AGC/OFF Switch: (automatic gain control)
OFF: The level of gain is fixed at 0dB. ON: the level of gain varies from 0
to 26dB. The default setting is OFF.
11. FL/NOM Switch: (flicker less or normal)
ON: In FL mode, AES should be turned off, because the shutter speed goes
to 1/120 sec (NTSC)
OFF (or NOM): This is the default setting
-
8
-

7 8, 9, 10, 11
-
9
-