Trivum RP010 User manual

trivum technologies GmbH
Eierstraße 48
70199 Stuttgart
[email protected]
www.trivum.com
www.facebook.com/trivumtechnologies
Further documentation and troubleshooting
To nd helpful log les in support cases:
– Open the MusicCenter WebCong.
– Click Logs & Warnings.
Please visit also our website for the latest documentation,
videos and information:
http://www.trivum.com
http://service.trivum.com
If support is needed
Please contact your local trivum dealer or write to:
[email protected]
Download links:
trivum ServerAdmin Tool (Windows):
http://service.trivum.com/win-admintool
How to update your trivum v8 to v9?
http://service.trivum.com/v9-update
iNote: The remote maintenance of all trivum devices is
activated by default. For disabling remote maintenance:
– Open the MusicCenter WebCong.
– Click Basic Setup.
– Uncheck Enable trivum remote support.
V201704 - Errors and specications subject to change without notice.
Quick Installation Guide for RP010
1. Unpacking
2. Mounting
3. Conguration
– Open trivum ServerAdmin Tool
– Double-click on the RP010
– Click Music Library -> Setup music library ->
Add network share
– Enter the Network share URL (smb://)
NAS
Router
DHCP
DHCP
Streaming
Network Audio Player
with KNX support
www.trivum.com
RP010
Line Out
GND
Right
Left
0-10V
GND GND
24V DC
Vol. Out
Ethernet
Power
Power
Line Out (to Amp)
Volume Out
(0-10V Control for Amp)
Ethernet
4
4
1
1
2
2
3
3
v9
Now with:

Quick Installation Guide for RP010
Required components for installation:
– 24VDC power supply with at least 2.5A
– ethernet cable
– network with DHCP capable router
– music amplier with analog input
– music archive (network share, NAS)
Optional components:
– trivum TouchPad for high comfort music selection
– wireless access point (if a mobile device is to be used)
– internet connection (required for software updates and
remote support)
1. Mounting and connection
1.1 Mount the RP010 on a 35mm DIN-rail.
1.2 Connect the Line Out to the input of your amplier.
1.3 Connect the power supply.
!Warning: Wrong polarity may damage the device!
Double check power cable polarity before connecting!
2. Conguration
The trivum RP010 has to be congured via web browser.
We recommend you to use the trivum ServerAdmin Tool.
The ServerAdmin Tool lists all trivum devices and their
IPaddresses in your network.
2.1 Please download and install the ServerAdmin Tool:
http://service.trivum.com/win-admintool
iNote: If you don‘t want to use the ServerAdmin Tool,
you have to identify the IPaddress of the RP010, open your
browser and enter: IPaddress/setup
2.2 Start the ServerAdmin Tool.
2.3 Double-click on the device (RP010) to open the
MusicCenter WebCong (main cong site).
iNote: If you are not sure about the assignment of the
listed devices, you can compare the serial number in the list
with the serial number on your device.
2.4 Static IP instead of DHCP? click Network.
2.5 Select Use static IPaddress.
2.6 Enter your IP settings and Restart to apply changes.
3. Adding a network share
The trivum RP010 can play sound les which are stored on
network shares. If you want to use a shared directory, make
sure that it supports the media sharing service Samba
service (smb). To add a network share (e.g. NAS):
3.1 Open the MusicCenter WebCong.
3.2 Click: Music Library -> Setup music library ->
Add network share.
3.3 Set the network path and user/password if required.
3.4 Click Save as new share.
3.5 Click Refresh your music index now.
4. Adding your online streaming service
account
4.1 Open the MusicCenter WebCong.
4.2 Click Add service.
4.3 Select your favorite service and enter your
user account.
4.4 Click Create the streaming service given account.
iNote: trivum supports only paid accounts.
lTip: The RP010 is AirPlay ready, so it’s easy to stream
every kind of music to the specic zone (with Apple
devices).
Backup your conguration
Once you have completed the setup, we recommend you
to make a backup of your conguration:
– Open the MusicCenter WebCong.
– Click Backup/Restore -> Export/import conguration.
– Follow the instructions.
For easy operation of your RP010, we recommend our
trivum TouchPad.
How to use a trivum TouchPad?
– Make sure your TouchPad is running software v2.35 or
above.
– Wait a few seconds until the TouchPad has booted.
– On the starting screen press
Pair TouchPad with Audio System.
– Press Select... and select your preferred trivum
MusicCenter from the pop-up menu.
How to use KNX?
The KNX programming of RP010 is done via web browser.
No need for extra KNX software.
– Open the MusicCenter WebCong.
– Click KNX and enable use KNX.
– Follow the instructions.
You nd further informations for KNX on:
http://service.trivum.com/knx