Trixie 49925 User manual

EWork steps for wooden wall.
First Step
Bring the product in final position and mark the screw-points in desired location. Use a spirit level or have someone
eyeball to make sure the holes are levelled.
Second Step
Mount the metal holder with attached wood screws to wooden wall at pilot markings.
Final Step
Mount the large platform and steps to the metal holder tighten with enclosed nut. Mount the short platform via attached screws
to the anchor.
Advice:
Please note the secure assembly and mounting requires one adult person.
Item No. Color
49925 Wall Mounted Cat Playground brown
Description Measurement Quantity Item No.
Large Platform 48 × 16 × 33 cm
121,9 × 40,6 × 27,9 in. 1 49925-10
Small platform 20 × 15 × 25 cm
50,8 × 38,5 × 63,5 in. 1 49925-11
Wall mounting step ø 18 × 22 cm
ø 45,7 × 55,8 in. 3 49924-12
Hardware Set 1 49925-60
Mounting stonewall with anchors
EWork steps for stone wall
First Step
Bring the product in final position and mark the screw-points in desired location. Use a spirit level or have someone eyeball to make sure the
holes are levelled.
Second Step
Drill 3/16” holes, be sure to keep the drill level.
Third Step
Insert 3/16” wall anchors (not included) into drilled holes (some anchors might require a hammer).
Fourth Step
Mount the metal holder with screws matching wall anchor (not included) to the wall.
Final Step
Mount the large platform and steps to the metal holder tighten with enclosed nut. Mount the short platform via attached screws to the
anchor.
Advice:
Please note the secure assembly and mounting requires one adult person.
Mounting wooden wall
Cut the plush, on the front-side,
at the desired hole with a sharp
blade carefully to allow the
holder pass through.
Pos. No. Description Measurement Quantity
aScrew cap 2
b Holder screw 50 × 27 × 28 mm
1,9 × 1,0 × 1,1 in. 2
c Holder screw 50 × 27 × 48 mm
1,9 × 1,0 × 1,8 in. 3
d Wood screw 60 mm
2,3 in. 10
eWood Screw M6 × 90 mm
M6 × 3,5 in. 2
fKey M6 1
d
e
db
b
d
c
dc
d
db
b
e
e
e
a
a
d
d
d
d
d
d
Aufbauanleitung/Assembling Instruction/Instruction de montage
TRIXIE Pet Products, Inc. · P.O. Box 101196 · Ft. Worth, TX 76185 · USA · www.trixie.de 93975260421
Assembling Instruction
#49925
Cut the plush, on the front-side,
at the desired hole with a sharp
blade carefully to allow the
holder pass through.
a
a

Mounting with drywall anchor Mounting 16“ wooden stud
E Work steps for drywall with wooden drywall stud
When using drywall anchors, we strongly recommend combining the drywall connection with at least one screw to a stud for a more
solid connection. Be careful not to break the drywall panel.
First Step
Please use a pencil. Bring the products in final position and mark the screw-point on the center of the wall. Use a spirit level or have
someone eyeball to make sure the holes are levelled.
Second Step
If you use self-drilling wall anchors a pilot hole is not needed. Use your drill and the 1/16“ bit to make pilot holes for maximum 1 inch to
markings. Insert wall anchors (not included). Be careful not to break the drywall panel.
Third Step
Mount the metal holder with screws to the wall anchor make sure the screws are fastened securely.
Final Step
Mount the condo to the metal holder tighten with enclosed nut. Hook the assembled hammock to the mounted metal holder. Connect
the steps to the metal holder and attach cap.
Advice:
Please note the secure assembly and mounting requires one adult person.
E Work steps for drywall with wooden drywall stud
First Step
Use a stud-finder or other technique to locate the studs. Please use a pencil. Bring the products in final position and mark the screw-point
on the center of the wall. Use a spirit level or have someone eyeball to make sure the holes are levelled.
Second Step
Mount the metal holder with attached screws to studs at pilot markings. Be careful not to break the drywall panel.
Final Step
Mount the large platform and steps to the metal holder tighten with enclosed nut. Mount the short platform via attached screws to the stud
Advice:
Please note the secure assembly and mounting requires one adult person.
Cut the plush, on the front-side,
at the desired hole with a sharp
blade carefully to allow the
holder pass through.
Cut the plush, on the front-side,
at the desired hole with a sharp
blade carefully to allow the
holder pass through.
a
e
db
b
d
a
c
d
c
b
b
d
d
a
a
e
ee
d
d
d
d
d
d
d
Aufbauanleitung/Assembling Instruction/Instruction de montage
TRIXIE Pet Products, Inc. · P.O. Box 101196 · Ft. Worth, TX 76185 · USA · www.trixie.de 93975260421
Assembling Instruction
#49925