
The orientation of a T.Radar Pro is indicated by the Euler angles with respect to the
three fixed axes (East, North and Up).
Recommendation:
For a 360 degree set up based on three T.Radar Pros, face the first T.Radar Pro to
the true North and set its Up angle to 0°. Place the second and the third T.Radar Pro
in a counterclockwise direction and set the Up angle to 120° and 240° respectively.
Tap to turn on or off a T.Radar Pro.
When a T.Radar Pro is in idle state, users can tap to reboot.
T.Radar Pro contains a GPS sensor and it will be enabled in the later software update.
B . Manage T.Radar Pros
Tap to set orientation.
Tap background to return to the Devices panel.
Hints :
Tips :
Changes can ONLY be done while
the T.Radar Pro is in idle state.
Caution :
Users should put their mobile device next
to the T.Radar Pro in parallel and check the
angle shown on the compass.
Enter the angle to the Up angle and add a
"-" (negative sign) before it to follow the
orientation direction.
Tips aforementioned should be done for
each T.Radar Pro respectively once the
T.Radar Pro has changed its location.
For iOS users, go Settings > Compass >
Switch on Use True North.
For Android users, download Digital
Compass (As the QR Code on the right) >
Switch into True Heading.