TRONTEQ ROQSTAR User manual

Installation Guide 2023-07-04
ROQSTAR Managed Fast Ethernet Switch Page 1 of 16
Installation Guide
ROQSTAR
Managed Fast Ethernet Switch
Part No
Description
006-130-102
ROQSTAR Managed 8-Port Fast Ethernet Switch M12
006-130-104
ROQSTAR Expandable 8-Port Fast Ethernet Switch M12
006-130-109
ROQSTAR Managed 8-Port Fast Ethernet Switch M12 PoE
006-130-112
ROQSTAR Expandable 8-Port Fast Ethernet Switch M12 PoE

Installation Guide 2023-07-04
ROQSTAR Managed Fast Ethernet Switch Page 2 of 16
© 2023 TRONTEQ GmbH
All rights are reserved. The contents of this manual are protected by copyright. Their use is allowed as part of use of TRONTEQ
GmbH products. Any other use which goes beyond in particular copying, reproduction, translation requires written consent of
TRONTEQ GmbH.
TRONTEQ GmbH reserves the right to modify the contents of this manual. In addition, we refer to the conditions of use
specified in the license agreement. The latest version of this manual is available online at www.tronteq.com.

Installation Guide 2023-07-04
ROQSTAR Managed Fast Ethernet Switch Page 3 of 16
Content
1. Safety Instructions......................................................................................................................... 4
Information about this Operation Instructions........................................................................... 4
Warning Information System..................................................................................................... 4
Qualified Personnel................................................................................................................... 4
Intended Use............................................................................................................................. 4
Liability Limitation...................................................................................................................... 4
Recycling................................................................................................................................... 5
2. ROQSTAR Ethernet Switches....................................................................................................... 6
Models Described in this Manual.............................................................................................. 7
Interfaces .................................................................................................................................. 8
3. Installation ...................................................................................................................................... 9
Installation Guidelines............................................................................................................... 9
Power Port .............................................................................................................................. 10
Ethernet Port........................................................................................................................... 10
USB Port ................................................................................................................................. 10
4. Start Up and Operation................................................................................................................ 11
Factory Settings ...................................................................................................................... 11
Configuration........................................................................................................................... 11
PoE Model Operation.............................................................................................................. 11
5. LED ................................................................................................................................................ 12
System LED............................................................................................................................ 12
Port LED.................................................................................................................................. 12
6. Technical Data.............................................................................................................................. 13
Electrical.................................................................................................................................. 13
Data Transfer.......................................................................................................................... 14
Fault Contact........................................................................................................................... 14
Startup Time............................................................................................................................ 14
Mechanical.............................................................................................................................. 15
Environmental......................................................................................................................... 15
MTBF ...................................................................................................................................... 15
Standards and Approvals........................................................................................................ 15
7. Order numbers ............................................................................................................................. 16
8. Contact.......................................................................................................................................... 16
Sales support.......................................................................................................................... 16
Technical support.................................................................................................................... 16

Installation Guide 2023-07-04
ROQSTAR Managed Fast Ethernet Switch Page 4 of 16
1. Safety Instructions
Information about this Operation Instructions
This operating instruction describes the application of the ROQSTAR Ethernet Switches. It allows the
safe and efficient handling of the product. The operating instruction is a part of the device and must be
available for the users at any time.
Before the beginning of any work the user has to read carefully and understand these instructions. The
foundation for safe working is the compliance with all specified safety and handling instructions in this
operating instruction. In addition, the local accident prevention regulations and general safety
regulations apply for the handling with electrical energy and communications equipment.
The schemes and illustrations of this instruction are provided for basic understanding and may differ
from the actual design.
Warning Information System
This manual contains notices you have to observe in order to ensure your personal safety, as well as to
prevent damage to property. The notices referring to your personal safety are highlighted in the manual
by a safety alert symbol, notices referring only to property damage have no safety alert symbol. These
notices shown below are graded according to the degree of danger.
WARNING!
Indicates a potentially dangerous situation that may result in death or
serious injury if it is not avoided.
Hint for useful tips and recommendations for efficient and trouble-free
operation.
Qualified Personnel
The user must ensure that only qualified personnel will work with the device. The product described in
this documentation may be operated only by personnel qualified for the specific task in accordance with
the relevant documentation, in particular its warning notices and safety instructions. Qualified personnel
are those who, based on their training and experience, are capable of identifying risks and avoiding
potential hazards when working with these products.
Intended Use
Proper transport, storage, installation, assembly, commissioning, operation and maintenance are
required to ensure that TRONTEQ products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be
observed.
Liability Limitation
All information and instructions in this operating instruction has been compiled in accordance with
current standards and regulations, state of the art as well as the knowledge and experience of the
applications in the field. In the following cases the manufacturer is not liable for damages:

Installation Guide 2023-07-04
ROQSTAR Managed Fast Ethernet Switch Page 5 of 16
►Disregard of the operating instructions in this manual
►Improper use
►Employment of non-qualified personnel
►Unauthorized technical modification or reconstruction
The general terms and conditions are valid as well as the delivery terms of the manufacturer and the
legal regulations which were taken when the contract was concluded.
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However,
the information in this publication is reviewed regularly and any necessary corrections are included in
subsequent editions.
Recycling
After usage, this device must be disposed in accordance with the current disposal regulations as
electronic waste.

Installation Guide 2023-07-04
ROQSTAR Managed Fast Ethernet Switch Page 6 of 16
2. ROQSTAR Ethernet Switches
ROQSTAR Ethernet Switches are designed for use on public transport vehicles. They ensure the
interconnection of Ethernet devices on an Ethernet network and facilitate the IP based communication
for on board equipment of a public transport vehicle.
ROQSTAR Unmanaged
These devices are characterized by their simplicity. The devices do not need to be configured and are
immediately ready for operation after power up. They are mainly suitable for simple, smaller networks
or serve as a local extension of the network.
ROQSTAR Expandable
The expandable switches have the capability to be upgraded from unmanaged to managed Ethernet
switch. They are initially delivered as unmanaged Ethernet Switches and can be upgraded to Managed
Switches during operation by a software update.
ROQSTAR Managed
These devices provide configuration and diagnostic capabilities for the network. They are suitable for
larger and more complex networks. Typical use cases are IP address assignment, network
segmentation, redundant communication, remote diagnostics, failure localization.
ROQSTAR PoE
Power over Ethernet (PoE) makes it possible to provide power supply through data cable to the
devices, that are connected to the Ethernet Switch. All ROQSTAR PoE devices have an integrated,
isolated 24V power supply for PoE.
ROQSTAR Gigabit
Devices with Gigabit Ethernet ports allow a data rate of up to 1000 Mbps. Gigabit speed is especially
useful where large amounts of data are required. A good example is applications like CCTV. In
addition, the larger data bandwidth is suitable for the backbone network. A Gigabit port can handle up
to ten Fast Ethernet Ports (100Mbps) with a non-blocking data transfer.

Installation Guide 2023-07-04
ROQSTAR Managed Fast Ethernet Switch Page 7 of 16
Models Described in this Manual
•supported
○available per software upgrade
Order No.
006-130-104
006-130-112
006-130-102
006-130-109
Type
Expandable
Expandable PoE
Managed
Managed PoE
Speed per Port
10/100 Mbit/s
10/100 Mbit/s
10/100 Mbit/s
10/100 Mbit/s
Number of Ethernet Ports
8
8
8
8
Ethernet Connectors
M12 d-coded
M12 d-coded
M12 d-coded
M12 d-coded
Power Supply Range
DC: 9.6...60 V
DC: 16...52 V
DC: 9.6…60 V
DC: 16...52 V
Power Supply Connector
M12 a-coded
M12 a-coded
M12 a-coded
M12 a-coded
Operating Temperature
-40° ... + 70°C
-40° ... + 70°C
-40° ... + 70°C
-40° ... + 70°C
PoE / PoE+ Ports
-
8
-
8
PoE Voltage / Total Power Budget
-
53V / 62W
-
53V / 62W
Boot time
< 5s
< 5s
< 20s
< 20s
auto negotiation, auto polarity, auto crossing
•
•
•
•
USB Interface for configuration and updates
○
○
•
•
Configuration via User Web Interface
○
○
•
•
Relay Output Contact, configurable
○
○
•
•
QoS, VLAN, SNMP, LLDP, Port Mirroring, Link
Aggregation, broadcast storm protection
○
○
•
•
RSTP, NTP, DHCP, DHCP Option 82
○
○
•
•

Installation Guide 2023-07-04
ROQSTAR Managed Fast Ethernet Switch Page 8 of 16
Interfaces
No
Description
No
Description
1
mounting holes
5
USB port
2
model label
6
port LED
3
status LED
7
Ethernet port
4
power port
8
ground terminal M6
2
a
8
2
4
6
7
3
1
5

Installation Guide 2023-07-04
ROQSTAR Managed Fast Ethernet Switch Page 9 of 16
3. Installation
WARNUNG!
Never perform wiring under voltage
Do not perform any installation under voltage
Installation Guidelines
Follow the steps below to install the device
►For installation choose a location with a flat plane
►Prepare the drill holes at the installation location for the device mounting holes
►Make sure that all electrical connectors are volt-free
►Make sure that the device is disconnected from all connections
►Align the device on the prepared plane and fasten up with four screws
►Connect device to chassis through ground terminal M6
►Connect and fasten all cables
Recommended torque:
►Ground terminal M6: min. 1Nm / max. 3Nm
►M12 cables: min. 0,6Nm / max. 0,8Nm
►Protection caps: 0,6Nm

Installation Guide 2023-07-04
ROQSTAR Managed Fast Ethernet Switch Page 10 of 16
Power Port
The ROQSTAR device provides two power ports. For Ethernet Switch function apply power supply to
V1 or V2. For PoE function the power supply must be applied to V1.
V1 supplies both, Ethernet and PoE function
V2 supplies Ethernet function only
Connector type: M12 a-coded, 5 pins, male
Pin
Name
Signal
Assignment
1
V1
power supply 1, positive pole
2
V2
power supply 2, positive pole
3
FAULT
fault contact (normally open)
4
FAULT
fault contact (normally open)
5
GND
power supply, negative pole
Ethernet Port
Connector type: M12 d-coded, 4 pins, female
Pin
Name
Signal
PoE
Assignment
1
TD+
Transmit Data +
plus pole (+)
2
RD+
Receive Data +
minus pole (-)
3
TD-
Transmit Data -
plus pole (+)
4
RD-
Receive Data -
minus pole (-)
USB Port
Connector type: M12 a-coded, 5 pins, female
Pin
Name
Signal
Assignment
1
D+
USB data, D+
2
D-
USB data, D-
3
5V
USB power supply, positive pole
4
DIH
not connected
5
GND
USB power supply, negative pole

Installation Guide 2023-07-04
ROQSTAR Managed Fast Ethernet Switch Page 11 of 16
4. Start Up and Operation
A managed ROQSTAR model starts boot-up process after a valid supply voltage is applied. After boot-
up process is finished, ROQSTAR Ethernet switch behaves according to configured settings. If no user
configuration is saved or available, factory settings are loaded.
Factory Settings
►Web interface IP-Addresses: 192.168.1.1
►Web interface Subnet 255.255.255.0
►Web interface login: admin
►Web interface password: password
►Ethernet Ports enabled, auto-negotiation
►VLAN no entries
►ITxPT Inventory Service enabled
►RSTP enabled
►DHCP Server enabled, Pool 192.168.1.10 - 192.168.1.254
►DHCP Client disabled
►PoE enabled
Configuration
Applying user configuration to the ROQSTAR Ethernet Switch can be done through:
►Manual settings via web interface
►Loading of configuration file via USB memory stick
►Loading of configuration file via API
►Loading of configuration file via Auto-Deployment
PoE Model Operation
After boot-up ROQSTAR Ethernet Switch detects, classifies and supplies PDs (powered devices) in
compliance to IEEE802.3at.
The total PoE power output is limited and controlled by internal logic. The power limit per port is set
according to user defined configuration. The power allocation is done per port in accordance to PoE port
settings. The logic continuously measures and monitors power consumption per port. A PD can be
dropped, if its power consumption exceeds allocated power limit or the consumption of all ports exceeds
total power budget.
Total power budget is defined in 6 Technical Data.

Installation Guide 2023-07-04
ROQSTAR Managed Fast Ethernet Switch Page 12 of 16
5. LED
LED provides a quick diagnostic for the device and the network
System LED
Name
Color
Behavior
Description
PWR
-
off
power supply not connected or voltage level too low
green
on
V1, V2 are both powered
green
flashing 1Hz
either V1 or V2 is powered
MOD
-
off
device is booting
green
on
device is in operation
green
flashing 1Hz
web interface session is active
green
flashing 10Hz
update is being performed
ERR
-
off
no error
red
flashing 1Hz
configuration error
red
on
general system error / V1 not powered on PoE model
Port LED
Name
Color
Behavior
Description
Link
-
off
link down
green
on
link up
Act
-
off
no data traffic
orange
flashing
data traffic
Name
Color
Behavior
Description
L/A
-
off
link down
green
on
link up
green
flashing
data traffic
Name
Color
Behavior
Description
PoE
-
off
PoE port not powered
orange
on
PoE port powered
orange
flashing
PoE port blocked
orange
flashing all port
V1 not supplied or internal PoE error

Installation Guide 2023-07-04
ROQSTAR Managed Fast Ethernet Switch Page 13 of 16
6. Technical Data
Electrical
Power Port parameters, standard model
min.
typ.
Max.
Dimension
Operating voltage SELV
+9.6
+24
+60
VDC
Reverse polarity protection
- 60
-
-
VDC
Reset level
-
8.0
-
VDC
Current consumption, all port with data transfer
V1 = 9.6V
-
-
420
mA
Peak inrush current
<1ms
-
10 @ 9.6V
14 @ 60V
A
Power consumption, all port with data transfer
5.3
W
Immunity of power interruption
10
-
-
ms
Internal fuse
-
2
-
A
Power Port parameters, PoE model
min.
typ.
Max.
Dimension
Operating voltage SELV
+16
+24
+52
VDC
Reverse polarity protection
- 60
-
-
VDC
Reset level
-
10
-
VDC
Current consumption, PoE load = 62W
V1 = 16V
-
-
5.0
A
Peak inrush current
<1ms
-
10 @ 9.6V
14 @ 60V
A
Power consumption, PoE load = 62W
V1 = 24V
-
-
80
W
PoE supply immunity of power interruption
-
0
-
ms
Internal fuse for PoE
-
8
-
A
Isolation
min.
typ.
max.
Dimension
Ethernet Port ↔Ethernet Port
-
-
-
VDC
Ethernet Ports (PoE) ↔Power Port
± 2250
-
-
VDC
Ethernet Ports ↔Chassis (ground)
± 2250
-
-
VDC
Chassis (ground) ↔Power Port
± 850
-
-
VDC
Fault Contact ↔Power/Ethernet/Chassis
± 850
-
-
VDC

Installation Guide 2023-07-04
ROQSTAR Managed Fast Ethernet Switch Page 14 of 16
PoE parameters
min.
typ.
max.
Dimension
Voltage
52
53
54
VDC
Current limit PoE class 0/3
-
290
320
mA
Current limit PoE class 1
-
70
90
mA
Current limit PoE class 2
-
130
150
mA
Current limit PoE class 4
-
560
660
mA
Internal fuse per port
-
1500
-
mA
Total PoE output power budget
62
-
-
W
Data Transfer
Ethernet-Ports
min.
typ.
max.
Dimension
Switch architecture
Store-and-Forward
Address table size
2000 MAC addresses
Bitrate
-
10 / 100
-
Mbit/s
Output impedance
-
100
-

Input impedance
-
100
-

Latency at 90 % load
at 10 or 100 Mbit/s (frame size 64 / 1518 Byte)
-
8 / 125
9 / 133
µs
Throughput unicast packets
Frame size 64 –1518 Byte
-
full wire
speed
-
Throughput multicast packets
Frame size 64 –1518 Byte
-
full wire
speed
-
Fame size
no VLAN Tag | VLAN Tag
64
-
1518 / 1522
Byte
Fault Contact
Parameter
min.
typ.
max.
Dimension
Switching Current
2
-
-
A
Switching Voltage
-
-
60
V
Startup Time
Model
min.
typ.
max.
Dimension
Managed
-
20
-
sec.
Expandable
-
5
-
sec.

Installation Guide 2023-07-04
ROQSTAR Managed Fast Ethernet Switch Page 15 of 16
Mechanical
Parameter
typ.
Dimension
Dimension (H x B x T, ± 0,5 mm)
121 x 175 x 52
mm
Mass standard type, net
520
g
Mass PoE type, net
780
g
Protection Class
IP54
-
Mounting
4x 4.8mm
-
Environmental
Parameter
min.
typ.
max.
Dimension
Ambient operating temperature
-40
-
+70
°C
Storage temperature
-40
-
+85
°C
Operating humidity (non-condensing)
10
-
95
%
Air pressure
700
(3000m)
-
-
hPa
MTBF
Model
25°C
60°C
Dimension
006-130-102
925 549
349 255
h
006-130-104
925 549
349 255
h
006-130-109
680 670
261 292
h
006-130-112
680 670
261 292
h
Standards and Approvals
The device complies with the following testing standards:
►Electromagnetic Radiation:
►EN 61000-6-4
►EN 55022: Class A
►FCC47 CFR Part 15 Class A
►Immunity against conducted interference and external fields:
►EN 61000-6-2
►EN 61000-4-2
►EN 61000-4-3
►EN 61000-4-4
►EN 61000-4-5
►EN 61000-4-6
►Specific applications
►EN 50155
►EN 61131-2
►UNECE (E1) R10
►UNECE (E1) R118
►ITxPT Label

Installation Guide 2023-07-04
ROQSTAR Managed Fast Ethernet Switch Page 16 of 16
7. Order numbers
Order No.
Description
006-130-102
8-Port Fast Ethernet Managed M12 Switch
006-130-104
8-Port Fast Ethernet Expandable M12 Switch
006-130-109
8-Port Fast Ethernet Managed M12 PoE Switch
006-130-112
8-Port Fast Ethernet Expandable M12 PoE Switch
8. Contact
Sales support
Please contact our sales team at [email protected] for further inquiries and questions regarding our
products.
Technical support
Please contact our support team at [e-mail] if you have any technical questions or if you
need technical training.
TRONTEQ GmbH
HOELZLESTR. 3
72768 REUTLINGEN
GERMANY
www.tronteq.com