Truckmate VCA-DAB Radio M50 User manual

www.truckmate.info
1
Installation guide of
VCA-DAB Radio M50

www.truckmate.info
2
Contents of VCA-DAB Radio M50 package
Installation of M50
A. To get all accessories connected with M50 main unit

www.truckmate.info
3
C. Operate on Car Radio tot start DAB radio
Step 1:
Enter the FM function on Car Radio
Step 2:
Tune the FM frequency to 87.5 MHz
Step 3:
Press the F1 button on M50 remote controller to set the FM transmission
frequency tot 87.5 MHz
Step 4:
Press Scan button on M50 remote controller to start DAB channel
searching
Step 5:
The RDS text of “SCAN” will show on Car Radio monitor
Step 6:
After searching, DAB audio will play automatically and teh DAG station will
show on RDS text
Step 7:
Press CH+ / CH-/ VOL+ / VOL-to change the channel and volume
Reminder:
1: Please make sure the remote controller is direct facing the IR eye during
operation
2: If there is interference on 87.5 MHz fot M50 FM transmission, there are 3 other
frequencies available for your selection. All available frequencies are listed as
shown below. Please press F1≈F4 on remote controller to change the
transmitted frequency.
F1:
87.5 MHz
F3:
107.9 MHz
F2:
87.6 MHz
F4:
108 MHz