True TG1F-1G User manual

FEATURES/BENEFITS
All dimensions rounded up to the nearest 1/8" ITrue Website: www.truemfg.com IToll Free Number • 1-800-325-6152 ISpecifications subject to change without notice.
• Environmentally friendly (R404A), refrigerant.
• Freezer holds -10°F (air off evaporator coil,
-20°F) for the best in food preservation.
• Shelving - (3) heavy duty, PVC coated wire
shelves per section (4) different interior kits
available.
• 300 series stainless steel solid doors and rain-
shield (the finest stainless available).
• Anodized quality aluminum sides, bottom and
back.
• Interior - attractive, NSF approved, white
aluminum sides. 300 series stainless floor and
solid door liner.
• Automatic defrost system time-initiated, tem-
perature-terminated.
• Automatic evaporator fan motor delay during
defrost cycle.
• Minimum wattage heater in cabinet frame
and door.
• Foamed-in-place polyurethane high density
cell insulation (CFC free).
• Lifetime guaranteed recessed handles on
solid doors.
• Door locks standard.
• Exterior, digital temperature display.
• Positive seal self-closing doors with 120
degree stay open feature. Lifetime guaran-
teed door hinges.
• Standard backguard improves airflow
(excludes pass-thru model).
• 4" diameter swivel castors standard equip-
ment. 6" legs available.
• Incandescent interior lighting on solid door
models. Fluorescent interior lighting, inte-
grated door light (IDL) on glass door models.
• Energy efficient, triple pane, thermal insu-
lated glass on glass doors.
• Pass-thru freezer designed to be rear-loaded
from prep area and front accessed.
• Top mounted unit positioned out of food zone
to maximize storage capacity.
• Self-contained system.
TG3F-3S
TG2F-2G
TG2FPT-2S-2S
† Depth does not include 13/8" for door handles (glass door models only).
† Depth does not include 23/8" for rear condensate enclosure (models TG3F-3S & TG3F-6HS only).
* Height does not include 5" for castor height or 6" for optional legs.
* Height does not include 1" for system mechanical components.
‡ Requires 115/208-230/60 Hz, single phase, 3 pole, 4 wire circuit.
* Height does not include 5" for castor height or 6" for optional legs.
* Height does not include 1" for system mechanical components.
‡ Requires 115/208-230/60 Hz, single phase, 3 pole, 4 wire circuit.
reaCh-infreezers
Model
Swing
Doors
Cu.
Ft. HP Amps
Crated
Weight
Cabinet Dimensions
L D† H*
SOLID DOORS
TG1F-1S 1 s/s 31 1/210.8 410 29 x 34
3
/ 4 x 78
1
/ 4
TG2F-2S 2 s/s 56 3/413.0 704 513/8x 34
3
/ 4 x 78
1
/ 4
TG3F-3S ‡ 3 s/s 85 11/211.8 790 761/2x 34
3
/ 4 x 78
1
/ 4
SOLID HALF DOORS
TG1F-2HS 2 s/s 31 1/210.8 410 29 x 34
3
/ 4 x 78
1
/ 4
TG2F-4HS 4 s/s 56 3/413.0 704 513/8x 34
3
/ 4 x 78
1
/ 4
TG3F-6HS ‡ 6 s/s 85 11/211.8 790 761/2x 34
3
/ 4 x 78
1
/ 4
GLASS DOORS
TG1F-1G 1 gls 31 3/410.2 435 29 x 34
7
/ 8 x 78
1
/ 4
TG2F-2G ‡ 2 gls 56 1 9.1 725 513/8x 34
7
/ 8 x 78
1
/ 4
Pass-thru freezer
Model
Swing
Doors
Cu.
Ft. HP Amps
Crated
Weight
Cabinet Dimensions
L D H*
SOLID DOORS
TG2FPT-2S-2S ‡ 4 s/s 56 1 9.1 754 513/8x 371/4x 781/4
Curb mountable units for TR, TA & TG series only. (5% list upcharge)
Remote cabinets available 14% off list (condensing units
supplied by others; system comes standard with
404A expansion valve and requires R404A refrigerant).
Consult factory technical service dept. for BTU information.
NEW
NEW
TG SerieS