True move H User manual
First connection to 4G Plug WiFi
This setting is applicable to 4G Plug WiFi และ TRUE Home Wireless Broadband
1. At the back of device, take a note of SSID and Password for the connection
2. Plug in device, the position while plugging in should be as shown (TRUE Logo should be
upright, not leaning nor horizontal)
3. Press and hold Power button on the left
4. Press and hold Power button until LED status of WiFi connection changed to blink green
then release a button
5. Wait a few minutes and at LED status of network (front center) red color will appear
(device is connecting mobile network)
6. Wait a few minutes when it’s ready to use (successfully connected), it’ll turn green or
blue
7. Table shows LED status
LED Status
Color
Description
Network status (Front center)
Red
Can’t connect to Internet
Green
Connect to network via 3G
Blue
Connect to network via 4G
WiFi and readiness to use
White
Prepare to connect to WiFi network
Red and green
WiFi is ready to use/ using WiFi
8. On device, turn on Wi-Fi
*example is iPhone iOS*
9. Search for true_plugwifi_xxxx as per
previously noted for SSID
10.Space for entering the Password
11.Then
1) Enter the password as per that taken from
the label at back of device
2) Press Join at bottom right
12.Phone will connect Wi-Fi, once connected
1) A check mark will appear in front of device name
2) At the top left, a fan sign appears (Wi-Fi sign) example is iPhone iOS
13.Wi-Fi connection status will be blink white and red
(that means : successfully connected and receive-send data via Wi-Fi between device and
4G Plug WiFi)
14.At connected device, go to Web
Browser (example is Safari)
15.In URL address
Type http://hlife.truecorp.co.th/smartplug?
Press Go
Or type any URL, it will lead to
http://hlife.truecorp.co.th/smartplug? as well
Other True Network Router manuals
