Trumeter IOT-GATEWAY-ETH User manual

IOT
GATEWAY
ETHERNET/4G/LTE
Quickstart Guide
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

CONTENTS
1. DEVICE LIGHT SUMMARY
2. DEVICE DIAGRAM
3. HARDWARE CONFIGURATION
i. Device Wiring
ii. Powering Device
iii. Device Mounting
4. CLOUD ACCESS
i. Registering a Customer Account
ii. Adding a New User
iii. Adding a New Gateway
 iv.EditingGatewayConguration
5. ALARM SETUP
i. SMS and Email Setup
ii. Graph Visualization and data export
6. WIRING DIAGRAM
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

1. DC power supply: 5.5*2.5mm, 9-36V
2. Device Reset: Reset button
3. Power Supply Output: Loop back (directly
connected to power supply input terminal)
4. Serial Port: RS485, 5.08mm terminal block plug-in
5. Analog Input:AI1~44currentinputdetection
6. Antenna: Main antenna
7. Digital Input:DI1~DI4is4waydry/wetnodeinput
detection
NETWORK
STATUS
SEND
RECEIVE
POWER
DI1 DI2 DI3 DI4 DO1 DO2 DO3 DO4
DIGITAL INTERFACES
AI4 AI3 AI2 AI1
ANALOG INTERFACES
TX RX
RS485
9-36VDC - IN
80mA MAX
DEVICE
RESET
COM DI1 DI2 DI3 DI4 COM
ANTENNA/
ETHERNET
COM AI4 AI3 AI2 AI1 COM
ANALOG INPUT - 4-20mA
R5485
9-36VDC - OUT
BA
+-
- +
Dependant on
Model
1 2 3 4 5 6
7
2. DEVICE DIAGRAM
Name Status 4G Gateway Ethernet Gateway
NETWORK
STATUS
2000mso󰀨/300mson
300mso󰀨/300mson No cable connection
OFF No cellular network
ON Router is initialising Ethernet link established
1000mso󰀨1000mson Cellular network is
initialising DNS error
1500mso󰀨100mson
100mso󰀨100mson SIMcarderror
200mso󰀨200mson GettingIPfromcellular
network
500mso󰀨,500mson Cellular connection
established
SEND
OFF No Cloud link No Cloud link
ON Cloud link established Cloud link established
Flashing Sending data Sending data
RECEIVE
OFF No Cloud link No Cloud link
ON Cloud link established Cloud link established
Flashing Receiving data Receiving data
POWER
OFF No power to device No power to device
ON Device is powered Device is powered
1. DEVICE LIGHT SUMMARY
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

4. CLOUD ACCESS
To access Trumeter Cloud dashboard, go to
There are two types of user account:
1. Customer User
2. Read-only User
A Customer User can create and modify parameters
within the dashboard including adding and managing
gateways and users.
A Read Only user has access to the dashboard and
can view and monitor parameters from a gateway.
i. Device Wiring
1. Wire selected APM meters 4-20ma connections to
router
2. Wire selected APM meters digital outputs (for alarm
feature) to router
3. Conguremeterstoensurealarmsareset(APM
congurator)
4. Plug multi adaptor into router without power
5. Check all wiring connections are correct
ii. Powering Device
1. Power router by plugging in multi adaptor
2. Check and wait for network connection
3. ConrmAnalogInputandDigitalInputconnectionLED’s
depending on how many meters connected to router
iii. Device Mounting
1. AttachIoTRoutertowallandorcabinet
2. Connect antenna to router via screw terminal
3. Place antenna outside of any metal enclosure to ensure
best reception
3. HARDWARE CONFIGURATION
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

ii. Adding a New User
1. Go to
2. Login as Customer User
3. Go to User Groups > Self Registration Users
4. Click on “+” and create new user
5. You can activate the user or send an email with
activation link to the email address used for the new
account. See full manual for assigning read only
permissions
i. Registering a Customer User Account
1. Go to
2. Click Sign Up to go to the registration screen
3. Onceregisteredaconrmationemailwillbesentto
the email address used for the account
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

iv. Editing Gateway Conguration
1. Go to
2. Open dashboard as Customer User
3. Clickcogonthegatewayyouwanttocongure
4. Changecongurationandclicksavewhendone
iii. Adding a New Gateway
1. Go to
2. Open dashboard as Customer User
3. Add unique serial code and model in the “add new
gateway”
4. Device will be claimed and added to the list of
gateways
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

5. ALARM SETUP
1. Set APM alarm output thresholds using APM
congurator
2. EnsurewiringfromAPMoutputtoDigitalInputon
gateway
3. When triggered, alarms will appear on the cloud
dashboard assigned to the APM
i. SMS and Email Setup
1. Go to
2. Login as Customer User
3. Click on the “cog” on the gateway you want to add
SMS or email
4. Ifyouleaveitblankitwillnotsend(SMSorEmail)
5. Ifyouhavemadeanerrorwhenediting,the
dashboard will tell you that the message is not being
sent
6. IntheGatewaylistyoucanseethenumberoftexts
you have left this month (Txt)
7. Iftherehasbeenanerrorinthetextandthe
message is not sent, the text will not be counted
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

6. WIRING DIAGRAM
ii. Graph Visualization and Data Export
1. Go to
2. Open dashboard as Customer User
3. Click on “Export Widget Data” to export in either
CSV, XLS or XLSX
NETWORK
STATUS
SEND
RECEIVE
POWER
DI1 DI2 DI3 DI4 DO1 DO2 DO3 DO4
DIGITAL INTERFACES
AI4 AI3 AI2 AI1
ANALOG INTERFACES
TX RX
RS485
9-36VDC - IN
80mA MAX
DEVICE
RESET
COM DI1 DI2 DI3 DI4 COM
COM AI4 AI3 AI2 AI1 COM
ANALOG INPUT - 4-20mA
R5485
9-36VDC - OUT
BA
+-
- +
GND AOUT DOUT1 DOUT2 RS485-A RS485-B
+
V
-
V
D
+
V
I
+
V
-
V
VOLTS / FREQ
CURRENT
~
~
PSU
N
L
PSU
Analog 4-20mA
GND/COM
Digital Alarm
EXAMPLE APM
ANTENNA/
ETHERNET
Dependant on
Model
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]