Trust 735S POWERCAM ZOOM User manual

TRUST 735S POWERC@M ZOOM
1
UK
CONTENTS
1 Introduction 2
1.1 General comments regarding photography 2
2 Safety 3
2.1 Batteries 3
3 Approval 3
4 Description of the camera 4
4.1 Status of the indicators 6
5 Preparing the camera for use 7
5.1 Inserting/removing the batteries 7
5.2 Inserting/removing a memory card 7
5.3 Attaching the wrist strap 9
5.4 Stand 9
5.5 Structure of the menu 9
5.6 LCD screen 11
6 Using the camera 13
6.1 Turning the camera on and off 13
6.2 Taking photographs 13
6.3 Recording video clips 15
6.4 Viewing photographs and video clips 16
7 Installation 18
7.1 Uninstalling old drivers and devices 18
7.2 Installing the software 18
7.3 Connecting the camera to the computer 20
8 Checking after the installation 22
9 Downloading images from the camera 23
9.1 Downloading & saving photographs using Windows Explorer 23
9.2 Trust 735S PowerC@m Zoom Camera Manager 24
10 Trust Photo Site 25
10.1 Registering 25
10.2 Using the Trust Photo Upload software 25
11 Using the software 26
11.1 Ulead Photo Express 4.0 26
11.2 Ulead Photo Explorer 7.0 26
11.3 VideoLive Mail 27
12 Use with a Macintosh 29
13 Troubleshooting 30
14 Warranty conditions 36
15 Technical specifications 37

TRUST 735S POWERC@M ZOOM
2
Recommended order Chapter
1. Preparing the camera for use (5)
2. Familiarizing yourself with the camera (4)
3. Taking and viewing photographs and videos (6)
4. Digitally editing photographs on an
IBM compatible computer (11)
5. Digitally editing photographs on a
Macintosh (12)
6. Uploading photographs onto the Internet (10)
Quick instructions for using the camera Chapter
1. Inserting the batteries (5.1)
2. Inserting a memory card (5.2)
3. Taking photographs or recording videos (6.2/6.3)
4. Viewing photographs or videos (6.4)
1 Introduction
This instruction manual is for users of the TRUST 735S POWERC@M ZOOM.
The TRUST 735S POWERC@M ZOOM can be used to take photographs, to record
live video images or as a webcam for videoconferencing on the Internet.
The camera can take photographs in three different resolutions, namely 1280 x 960
(1.3 Mpixel), 1600 x 1200 (2.0 Mpixel) and 2048 x 1536 (3 Mpixel). The Trust
Camera Manager can be used to download photographs which have been taken in
the 3 Mpixel resolution with a resolution of 4 Mpixel (see chapter 9.2).
The photographs can be edited using the applications provided with the camera.
An extra application has been included specially for the Trust camera which allows
you to place your photographs on the Trust photograph website
(www.trustphotosite.com) (see chapter 10).
1.1 General comments regarding photography
Test photograph
Before you start photographing a unique event, it is a good idea to first take a
number of test photographs. This will help to ensure that the camera works as
required.
No compensation for unsuccessful photographs
No compensation may be claimed for unsuccessful photographs as a result of a
faulty camera, faulty software, etc.
Exchanging photographs and video clips
No guarantees are given that photographs and video clips produced with this
camera can be displayed on other devices or that photographs and video clips
produced with other devices can be displayed in this camera.
!

TRUST 735S POWERC@M ZOOM
3
UK
Sunlight
Do not aim the camera directly at the sun for a long period of time. This may damage
the sensor.
Shaking/knocks
Do not shake the camera or knock it against anything. This may cause a fault,
unsuccessful photographs, memory incompatibility or the loss of photographs from
the memory.
LCD screen
There may sometimes be small black or clear dots visible on the LCD screen. This is
normal and does not affect the photographs. There is no reason to exchange the
camera if there are 10 dots or less.
Exposing the LCD screen to direct sunlight for a long period of time may cause
faults.
Lens
Keep the glass of the lens clean. Use a cotton bud to clean the lens. If necessary,
use special cleaning liquid for camera lenses. Do not use a different cleaning
product.
2 Safety
Carefully read the following instructions before use.
-The TRUST 735S LCD POWERC@M ZOOM does not require any special
maintenance. Use a slightly damp, soft cloth to clean the camera.
-Do not use aggressive substances, such as white spirit, to clean the device.
These may harm the material.
-Do not submerge the device in liquid. This may be dangerous and will
damage the device. Do not use the device near water.
-Do not repair this device yourself.
2.1 Batteries
-The Duracell Ultra batteries supplied with the device are not rechargeable.
Do not try to recharge them, because this may cause them to explode.
-Never throw the batteries onto an open fire. The batteries may explode.
-Never drill holes into the batteries.
-Keep the batteries out of the reach of small children.
-Only use AAA alkaline batteries with this device.
You can also use rechargeable AAA NiMH batteries (minimum 600 mAh).
-When the alkaline batteries (including Duracell Ultra batteries) are empty, ask
your local authority where you can dispose of them.
Note: Standard AAA NiCd batteries are unsuitable for use with this device.
Note: Do not use old and new batteries at the same time, because the old
batteries may deplete the new ones.
Note: The batteries should be removed if the camera is not going to be used
for some time. This will save the battery capacity.
3 Approval
This device meets the essential requirements and other relevant conditions of the
applicable European directives. The Declaration of Conformity (DoC) is available at
www.trust.com/13675/ce.

TRUST 735S POWERC@M ZOOM
4
4 Description of the camera
Tables 1 to 4 and figure 1 can be used to quickly become acquainted with the
camera.
Item Description Function
1 Power button Turns the camera on and off (see chapter 6.1).
2 Lens cover Protects the lens when the camera is not in use
(see chapter 6.1).
Press this button to take a photograph (see
chapter 6.2).
Press the button to start recording a video clip.
Press this button again to stop recording a video
clip (see chapter 6.3).
3 Shutter / Quick Exit
Button
Press this button to exit the menu (see chapter
5.5).
Use this switch to place the camera in the
following modes:
Camera (video) mode
Photo mode
4 Mode switch
Playback mode
5 Microphone Records sound whilst recording video clips.
6 Flash Use the built-in flash to give the subject extra
lighting if it is in dark surroundings or for extra
lighting when there is backlighting (see chapter
6.2.4).
7 USB plug Connection for connecting the camera to the
USB port of a computer.
Switch for selecting the macro or micro mode
(see chapter 6.2.1).
Macro mode: 30 – 60 cm.
8 Focus switch
Micro mode: 60 cm to infinity.
9 Lens Records the image to be taken.
10 Self-Timer LED
indicator
Flashes when the automatic exposure function is
used (see chapter 6.2.5).
See table 5 for a status summary.
Table 1: Functions on the front of the camera

TRUST 735S POWERC@M ZOOM
5
UK
Item Description Function
11 LCD screen With this screen, you can:
•View a subject
•View photographs and video clips already
taken.
•Configure the menu functions.
12 Control button up /
zoom in
•Button to scroll up/back through the menu.
•Scrolls through photographs and video clips.
•Zooms in on the subject.
13 Control button
down / zoom out
•Button to scroll down/back through the menu.
•Scrolls through photographs and video clips.
•Zooms out on the subject.
14 Menu/OK button •Opens the menu. There is a separate menu
for each mode (Photo, Video and Playback).
•Confirms the chosen option.
15 LED indicator Indicator for displaying the camera status (see
table 6).
16 Strap holder For connecting the wrist strap (see chapter 5.3).
17 Battery / SD/MMC
card cover
Cover for the batteries (see chapter 5.1) and the
memory card (see chapter 5.2).
Table 2: Functions at the rear of the camera
Item Description Function
18 Tripod port The stand supplied or a different stand can be
screwed in here (see chapter 5.4).
Table 3: The bottom of the camera
Item Description Function
19 SD/MMC Card slot Slot for a memory card (see chapter 5.2).
20 Battery holder Compartment for the batteries (see chapter 5.1).
Table 4: Right-hand side of the camera

TRUST 735S POWERC@M ZOOM
6
4.1 Status of the indicators
LED Colour, status Description
Red, flashing. Counting down.Automatic exposure
indicator (10, figure 1) Red, flashing quickly. Taking a photograph.
Table 5: Automatic exposure indicator
Action Indicator status Duration Description
Flashes red ~ 4 sec. Camera is getting ready for
use.
Turning the
camera on
Lit green. The camera is ready for use.
Flashes red ~ 6 sec. The picture is being saved in
the memory.
Taking a
photograph.
Lit green. The camera is ready for use.
Flashes red ~ 12 sec. The camera is saving the
photograph in the memory and
the flash is being recharged.
Taking a
photograph
using the flash
Lit green. The camera is ready for use.
Lit green. Counting down before taking
the photograph.
Flashes red ~ 4 sec. The camera is saving the
photograph in the memory.
Taking a
photograph
using the
automatic
exposure Lit green. The camera is ready to take
the next photograph.
Table 6: Indicator

TRUST 735S POWERC@M ZOOM
7
UK
5 Preparing the camera for use
5.1 Inserting/removing the batteries
Follow the instructions given below to insert or remove the batteries (see figure 4).
1. Open the battery compartment (1, figure 4) on the side of the camera by
sliding the cover slightly downwards and then flipping it open.
Comment: Remove the empty batteries before inserting new batteries.
2. Insert the new or full batteries as indicated on the battery flap or the battery
holder (2, figure 4).
3. Close the battery compartment again by pushing it closed and sliding it into
place (3, figure 4).
Your camera is now ready for use.
When the camera is turned on, the battery indicator will be displayed in the bottom
right-hand corner of the LCD screen.
Note: If the camera is turned on in the Playback mode, “No image” will flash on
the LCD screen. Set the camera to a different mode.
Note: Inserting the batteries incorrectly may cause damage to the camera. The
warranty will then no longer be valid.
Note: NiCd batteries are unsuitable for use with this device. It is recommended
to use NiMH batteries.
Note: It is recommended to use NiMH (minimum 600 mAh) with this camera.
Note: The batteries will not be recharged when the camera is connected to a
USB port on your computer.
5.1.1 Battery status on the LCD screen
Symbol Status
Batteries full.
Batteries half empty.
Flashing
red
Batteries empty. Replace the
batteries to continue using the
camera.
Table 7: Battery status on the LCD screen
5.1.2 Lifespan of the batteries
The lifespan of the batteries is approximately:
Duracell Ultra: 650 photographs without using the flash, 45 minutes.
NiMH 600 mA: 110 photographs using the flash.
5.2 Inserting/removing a memory card
The Trust 735S PowerC@m Zoom has a 16 MB internal memory. The photographs
and video clips are saved in the internal memory. This memory can be extended with
an SD (Secure Digital) or an MMC (Multi Media Card) memory card. The

TRUST 735S POWERC@M ZOOM
8
photographs and video clips are saved on a memory card when one has been
inserted into the camera. Memory cards can be purchased from, for example, a
photography shop.
5.2.1 Inserting a memory card
Follow the instructions given below to insert a memory card.
1. Open the battery compartment (17, figure 1) on the side of the camera by
sliding the cover slightly downwards and then flipping it open.
2. Place the memory card into the camera as indicated on the battery
compartment (see figure 5). Press the memory card into the slot until it can
go no further.
Note: The memory card can only be inserted into the camera in one way. Do
not force the card into the slot. This could damage both the memory card
and the camera.
3. Close the battery compartment again by pushing it closed and sliding it into
place
The external memory card must first be formatted for optimal use (see chapter
6.4.3). Once the memory card has been inserted correctly, the storage indicator
(item 3, table 13) will appear on the LCD screen.
5.2.2 Removing a memory card
Note: Never remove a memory card whilst the camera is still processing data
(indicator flashes red (15, figure 1)). This may result in the loss of data or
damage.
Follow the instructions given below to remove a memory card.
1. Open the battery compartment (17, figure 1) on the side of the camera by
sliding the cover slightly downwards and then flipping it open.
2. Remove the memory card by pushing it so that the lock is released. Remove
the memory card from the camera (see figure 6).
3. Close the battery compartment again by pushing it closed and sliding it into
place
The storage symbol will disappear from the LCD screen.
5.2.3 Storage capacity
The table below gives an indication of how many photographs or the length of video
clips which can be saved on a memory card.
Note: The number of photographs or the length of the video clips can vary. This
depends on the colour saturation of the photographs or video clips.
Photograph Video
Memory
2048 x 1536 1600 x 1200 1280 x 960 Minutes
Internal memory (16
MB)
20 30 45 2
SD/MMC 32 MB 40 60 96 4
SD/MMC 64 MB 80 120 192 8
SD/MMC 128 MB 160 240 384 16
SD/MMC 256 MB 320 480 768 32
SD/MMC 512 MB 640 960 1536 64
Table 8: Number of photographs or length of video clips on a memory card

TRUST 735S POWERC@M ZOOM
9
UK
5.3 Attaching the wrist strap
You can attach the wrist strap to the camera for optimal ease of use and safety.
1. Insert the thin end of the wrist strap through the eye (16, figure 1).
2. Make a loop from the part of the wrist strap which has been inserted through
the eye.
3. Thread the other end of the wrist strap through the loop.
5.4 Stand
You can use the stand to hold the camera still when, for example, using the
automatic exposure button to take a detailed photograph. You can also use the
stand when you use the camera as a webcam for videoconferencing.
1. Screw the stand into place on the bottom of the camera (see figure 7).
2. Unfold the feet, unlock the stand using the handle and place the camera in
the desired position.
3. Lock the stand by placing the handle back in the starting position.
5.5 Structure of the menu
Use the tables below and figure 2 to familiarize yourself with the camera’s menu.
You can use the menu to configure the camera as desired. The menu for each mode
(Photo, Camera and Playback) can be configured separately.
Carry out the following to open the menu:
1. Turn the camera (see chapter 6.1).Select the desired mode (Camera, Photo,
Playback) (4, figure 1 and table 1).
3. Press the MENU/OK button (14, figure 1 and table 2) to open the menu.
4. Use the UP (12, figure 1 and table 2) and DOWN buttons (13, figure 1 and
table 2) to scroll through the menu.
5. Press the MENU/OK button to select an item.
6. You can close the menu by selecting ‘Exit’ or by pressing the EXPOSURE
button (1, figure 1 and table 1).
Note: Default settings are shown in bold.
5.5.1 Photo mode
Item Function Options Description Chap
2048 x 1536 3.0 Mega Pixel resolution.
1600 x 1200 2.0 Mega Pixel resolution.
1 Resolution (size)
1280 x 960 1.3 Mega Pixel resolution.
6.2.3
Auto Automatic mode.2 Flash (strobe)
Off Flash is turned off.
6.2.4
On3 Automatic
exposure Off
Automatic exposure turned
on or off.
6.2.5
Auto Automatic setting.
4 Exposure
Backlight Setting for backlight.
6.2.6

TRUST 735S POWERC@M ZOOM
10
Item Function Options Description Chap
Auto Automatic white balance
setting.
Sunny Photographs outside in the
sun.
Cloudy Photographs in cloudy
weather.
Fluorescent Photographs in fluorescent
lighting.
5 White balance
Tungsten Photographs in
incandescent lighting.
6.2.7
Normal Photographs without
alterations.
B/W Black-and-white
photographs.
Classic Photographs with a classic
(sepia) appearance.
6 Effect
Solarize Photograph looks like an
illustration.
6.2.8
7 Settings Alters the settings. 5.5.4
8 Exit Exits the menu.
Table 9: Menu functions for the Photo mode
5.5.2 Camera mode
Item Function Options Description Chap
Normal Record video clips in the
normal colour.
1 Effect
B/W Record video clips in black-
and-white.
6.3.1
2 Settings Alters the settings. 5.5.4
3 Exit Exits the menu.
Table 10: Menu functions for the Camera mode
5.5.3 Playback mode
Item Function Options Description Chap
Yes Deletes the selected
photograph from the
memory.
1 Delete One
No Cancels the deletion.
6.4.1
Yes Deletes all the photographs
from the memory.
2 Delete All
No Cancels the deletion.
6.4.2
Yes Formats the memory.3 Format
No Cancels the formatting.
6.4.3

TRUST 735S POWERC@M ZOOM
11
UK
Item Function Options Description Chap
4 Settings Alters the settings. 5.5.4
5 Exit Exits the menu.
Table 11: Menu functions for the Playback mode
5.5.4 Settings
Select ‘Setting’ from the menu and press the MENU/OK button. You can change the
settings in this menu.
Item Function Options Description
Year
Month
Day
Hour
1 Date and time
(1,2,3)
Minute
Sets the date and time.
On2 Sound (1,2,3)
Off
Sets the sound for each function.
On3 LCD Display
(1,2,3)Off
Displays the icons on the LCD screen.
On4 Date Stamp (1)
Off
Places the date on a photograph.
50 Hz5 Frequency (1,2,3)
60 Hz
Selects the frequency of the electrical
mains.
English*6 Language (1,2,3)
Deutsch
Sets the language for the LCD screen.
Yes7 Default
No
Returns to the default settings.
8 Exit Exits the menu.
Table 12: Options in the ‘Settings’ menu
(1): Option only available in the Photo mode.
(1,2,3): Option available in the Photo, Camera and Playback modes.
5.6 LCD screen
See the chapters below for a description of the symbols displayed on the LCD
screen (see figure 3).

TRUST 735S POWERC@M ZOOM
12
5.6.1 Photo mode
These symbols are displayed on the LCD screen when taking a photograph (see
chapter 6.2).
Item Symbol Description Chap
1Number of photographs taken.
2Battery condition. 5.1.1
3Storage indicator.
The photographs will be saved in the internal
memory if the symbol is not visible.
5.2
4Flash status. 6.2.4
5Resolution. 6.2.3
6Macro/micro mode. 6.2.1
7Photo mode.
8Zoom factor.
Table 13: Symbols displayed on the LCD screen in the Photo mode
5.6.2 Camera mode
These symbols are displayed on the LCD screen when recording a video clip (see
chapter 6.3).
Item Symbol Description Chap
1Number of video clips taken.
2Battery condition. 5.1.1
3Storage indicator.
The video clips will be saved in the internal
memory if the symbol is not visible.
5.2
6Macro/micro mode. 6.2.1
7Camera mode.
Table 14: Symbols displayed on the LCD screen in the Camera mode

TRUST 735S POWERC@M ZOOM
13
UK
5.6.3 Playback mode
These symbols are displayed on the LCD screen when viewing photographs and
video clips (see chapter 6.4).
Item Symbol Description Chap
1Number of the photograph or video clip.
2Total number of photographs and video clips.
3Battery condition. 5.1.1
4Storage indicator.
The photographs or video clips will be saved in
the internal memory if the symbol is not visible.
5.2
5Playback mode.
6Recording status (photograph or video clip).
Table 15: Symbols displayed on the LCD screen in the Playback mode
6 Using the camera
6.1 Turning the camera on and off
The camera can be turned on and off in two different ways.
1. By opening/closing the lens’ protective cover (2, figure 1).
2. By pressing the Power button (1, figure 1).
Note: The LCD screen is turned off if the camera is not used for 60 seconds.
The LCD screen is turned back on by pressing any button.
Note: The camera turns itself off to save the batteries if it is not used for 3
minutes.
6.2 Taking photographs
Follow the instructions given below to take a photograph using the camera.
1. Turn the camera on (see chapter 6.1).
2. Set the camera to the Photo mode (4, figure 1).
3. Use the LCD screen to search for the object you wish to photograph.
4. Press the exposure button (3, figure 1) to take a photograph.
The indicator (15, figure 1) will flash red.
You can take another photograph once the indicator goes green.
The following chapters explain the extra options which make it possible to get more
from your camera.
Note: A digital still camera requires time to focus correctly. It can, therefore,
take some time before the photograph is saved in the memory. Take this
into account when taking action photographs or when photographing
moving objects.

TRUST 735S POWERC@M ZOOM
14
See www.trustphotosite.com for more information about taking photographs. Click
on 'Tutorial'.
6.2.1 Adjusting the focus
Depending on the distance to the object to be photographed, use the macro switch
(8, figure 1) to adjust the distance.
•Macro mode: use this setting when the object is at a distance of between 30
cm and 60 cm.
•Micro mode: use this setting when the object is at a distance greater than 60
cm.
The wrong setting may produce photographs which are out of focus.
6.2.2 Zoom in and out
The camera has a 4x digital zoom function. The digital zoom increases the size of
the image by digitally processing it.
•Zoom in: Press the zoom in button (12, figure 1).
•Zoom out: Press the zoom out button (13, figure 1).
The zoom factor is displayed in the top left-hand corner of the LCD screen.
6.2.3 Resolution
Photographs can be saved in the memory in three different resolutions. The
resolution is set using the menu (see chapter 5.5.1). The Camera Manager program
can be used to increase the resolution to 4 Mpixels (see chapter 9.2).
1. Open the menu as described in chapter 5.5.
2. Select option 1, ‘Size’.
3. Press the MENU/OK button.
4. Select the desired resolution using the control buttons (12 and 13, figure 1).
5. Confirm the resolution using the MENU/OK button.
When must I use a certain resolution?
Low resolutions are recommended for photographs which are to be used on the
Internet.
High resolutions are recommended for photographs which are to be printed or
edited.
Image ratio:
Image ratio: 5:3 Æresolution 1280 x 960
Image ratio: 3:2 Æresolution: 1600 x 1200 and 2048 x 1536
Note: The lower the resolution, the more photographs can be saved in the
memory.
6.2.4 Using the flash
The camera’s flash can be turned off or set to automatic. In the automatic setting,
the flash is only used when there is insufficient light. The effective distance of the
flash is 1.5 metres.
The flash can be set using the menu (item 2) (see chapter 5.5.1).
6.2.5 Automatic exposure
You can use the automatic exposure function when you wish to take a photograph of
yourself or when you wish to photograph an object where the camera must be as still
as possible, for example on the stand.

TRUST 735S POWERC@M ZOOM
15
UK
The automatic exposure function is selected using the menu (item 3) (see chapter
5.5.1).
A photograph will be taken 10 seconds after the exposure button is pressed when
this function has been selected. The indicator for the automatic exposure function
(10, figure 1) on the front of the camera will flash slowly. The photograph is taken
when the indicator flashes quickly. The counter is displayed on the LCD screen.
Note: If you wish to use the automatic exposure function again, it must be
selected again after the photograph has been taken.
6.2.6 Exposure
The exposure setting can be set to ‘Automatic’ or ‘Backlight’.
•Auto: select this option when you are not sure of the light source or when the
object is in the light.
•Back light: select this option when you have backlighting when photographing
the object.
The exposure is selected using the menu (item 4) (see chapter 5.5.1).
6.2.7 White balance
Under normal circumstances, the white balance is set automatically. You can select
the white balance manually for conditions which do not change or for certain lighting
conditions.
•Auto: automatic setting (indoor and outdoor photography).
•Sunny: setting for sunny, outdoor conditions (outdoor photography).
•Cloudy: setting for cloudy, outdoor conditions (outdoor photography).
•Fluorescent: setting for fluorescent lighting (indoor photography).
•Tungsten: setting for incandescent lighting (indoor photography).
The white balance is selected using the menu (item 5) (see chapter 5.5.1).
Tip: A photograph is sensitive to the light conditions. In sunlight, the
photograph appears blue and under fluorescent lighting, the photograph
appears green. The human eye can solve these problems. However, this
camera cannot solve this problem without making alterations. Under
normal conditions, the white balance is adjusted automatically by the
camera. But if there are strange colours, it is recommended to alter the
white balance manually.
6.2.8 Effect
Photographs can be digitally edited to give them a special effect.
•Normal: no effect is added.
•B&W: The photograph is monochrome (black-and-white).
•Classic: The photograph is sepia (like an old photograph).
•Solarize: The contrast is clear and the photograph looks like an illustration.
The effects are selected using the menu (item 6) (see chapter 5.5.1).
6.3 Recording video clips
Short video clips can be recorded using the Trust 735S PowerC@m Zoom. The
maximum resolution is 320 x 240 pixels. The video clips are saved in the memory in
the AVI format.

TRUST 735S POWERC@M ZOOM
16
Follow the instructions given below to record video clips using the camera.
1. Turn the camera on (see chapter 6.1).
2. Set the camera to the Camera mode (4, figure 1).
3. Press the exposure button to start the recording. The video images that are
being recorded will be displayed on the LCD screen.
The camera will also record the sound.
The indicator on the camera will flash red.
4. Press the exposure button again to stop recording.
The focus must be set correctly when recording a video clip of an object at a
distance of between 30 and 60 cm. See chapter 6.2.1 for instructions on how to
focus the camera correctly.
Note: The sound is not recorded in CD quality. You can compare the sound
quality to a telephone conversation.
6.3.1 Effect
Video clips can be digitally edited to give them a special effect.
•Normal: no effect is added.
•B&W: The photograph is monochrome (black-and-white).
The effects are selected using the menu (item 1) (see chapter 5.5.2).
6.4 Viewing photographs and video clips
Once you have taken some photographs or recorded video clips, you can view them
on the LCD screen. Follow the instructions given below.
1. Turn the camera on (see chapter 6.1).
2. Set the camera to the Playback mode (4, figure 1). The last photograph of
video clip will be displayed on the LCD screen.
3. Use the control buttons (12 and 13, figure 1) to view the next/previous
photograph or video clip on the LCD screen.
If a video clip is displayed, it will play immediately.
Note: Sound is not produced when a video clip is played on the camera.
Sound is produced when the video clip is played on a computer.
6.4.1 Deleting one photograph or video clip
See the instructions given below to delete one photograph or video clip.
1. Turn the camera on (see chapter 6.1).
2. Set the camera to the Playback mode (4, figure 1). The last photograph or
video clip will be displayed on the LCD screen.
3. Use the control buttons (12 and 13, figure 1) to scroll to the photograph or
video clip you wish to delete.
4. Press the MENU/OK button (14, figure 1).
5. Select ‘Delete One’ from the menu and press the MENU button.
6. Select ‘Yes’ and press the MENU button to delete the photograph or video
clip.
Select ‘No’ and press the MENU button if you do not wish to delete the
selected photograph or video clip.
7. Close the menu by pressing the exposure button.

TRUST 735S POWERC@M ZOOM
17
UK
6.4.2 Deleting all the photographs and video clips
Follow the instructions given below if you wish to delete all the photographs and
video clips from the memory.
1. Turn the camera on (see chapter 6.1).
2. Set the camera to the Playback mode (4, figure 1).
3. Press the MENU/OK button (14, figure 1).
4. Select ‘Delete All’ from the menu and press the MENU button.
5. Select ‘Yes’ and press the MENU button to delete all the photographs and
video clips.
Select ‘No’ and press the MENU button if you do not wish to delete all the
photographs and video clips.
6. Close the menu by pressing the exposure button.
6.4.3 Formatting the memory
All the data which is saved in the memory will be deleted when the memory is
formatted. Therefore, check the contents of the memory before formatting it.
Follow the instructions given below if you wish to format the memory.
1. Turn the camera on (see chapter 6.1).
2. Set the camera to the Playback mode (4, figure 1).
3. Press the MENU/OK button (14, figure 1).
4. Select ‘Format’ from the menu and press the MENU button.
5. Select ‘Yes’ and press the MENU button to format the memory.
Select ‘No’ and press the MENU button if you do not wish to format the
memory.
6. Close the menu by pressing the exposure button.

TRUST 735S POWERC@M ZOOM
18
Short instructions for IBM compatible computers
Chapter
1. Uninstalling old drivers and devices (7.1)
2. Installing the software (7.2)
3. Connecting the camera to the computer (7.3)
4. Checking after the installation (8)
5. Downloading and editing photographs (9 and further)
7 Installation
7.1 Uninstalling old drivers and devices
The most common cause of faults during installation is the presence of a driver for a
similar, old device. The best solution is to first remove all drivers related to old
devices before installing the new driver. Make sure you only delete programs for old,
unused (similar) devices.
1. Enter the Windows ‘Safe Mode’ (press F8 when starting Windows and then
select ‘Safe Mode’ from the menu which is displayed).
2. Click on ‘Start – Settings – Control Panel’ and double-click on the
‘Add/Remove Programs’ icon.
3. Find all the programs for similar, old devices and remove these by clicking on
the ‘Add/Remove’ button. When in the ‘Safe Mode’, it is possible for some
programs to appear twice. In that case, remove all the programs which
appear twice.
4. Restart the computer.
7.2 Installing the software
A number of different applications are supplied with the camera. These applications
do not have to be installed to use the camera. However, it is recommended to install
these programs in order to use all the extra options available with the camera.
Note: Windows XP and Windows 2000 users: The instructions given below can
only be carried out if you are logged on as ‘Administrator’.
Note: Make sure all other applications are closed during the installation.
Note: The latest driver can be downloaded from www.trust.com/13675. Check
whether a new driver is available and use this for the installation.
Note: Make sure all other programs are closed during the installation.
Note: During installation in Windows XP, you may receive a message saying
that the driver has not been signed. This does not cause a problem for
the functionality. Continue with the installation.
Note: In the example, ‘D:\’ is used to indicate the CD-ROM drive. This may be
different for your computer.
7.2.1 Trust Software Installer
1. Insert the CD-ROM into your computer’s CD-ROM drive. The installation
program will start automatically. If it does not start automatically, carry out
the following:
a) Select 'Run' from the Windows Start menu.
!

TRUST 735S POWERC@M ZOOM
19
UK
b) Type [D:\SETUP.EXE] and click on 'OK' to start the Trust Software
Installer.
2. The Trust Software Installer will appear (see figure 8).
3. Select the language you wish to use for the installation. The language
selected only relates to the Trust Software Installer, not the software which
is to be installed.
4. Select ‘Install Driver’ to install the driver (see chapter 7.2.2).
Select ‘Open SOFTWARE menu’ for a menu of the software which can be
installed.
Select ‘Open MANUAL menu’ for a menu of the electronic instruction
manual for this device and the electronic instruction manuals for the
software (if available).
7.2.2 Driver (Trust Camera Manager)
The Trust Camera Manager is the main program to use to view the recordings made
using the camera and to save them on your computer. The camera can also be used
as a PC Camera (webcam). You can then save photographs and video clips via your
computer.
The software allows photographs which have been taken in a resolution of 3 Mega
Pixels (2048 x 1536) to be saved on your computer in a resolution of 4 Mega Pixels
(2340 x 1755).
Follow the instructions given below to install the program.
1. Click on ‘Install Driver (Trust Camera Manager)’ in the Trust Software Installer
to install the driver for the camera.
2. Select the language you wish to use.
3. Follow the on-screen instructions to complete the installation.
Once the installation has been completed, you can start the program as follows:
‘Start – Programs – Trust – Trust 735S PowerC@m Zoom – Trust 735S PowerC@m
Zoom’ (see chapter 9.2 for more information).
7.2.3 Trust Photo Upload
This software can be used to upload your photographs to the Trust Photo Site. See
chapter 10 for more information.
Note: The latest version of the Trust Photo Upload software can always be
downloaded from the Trust website.
1. Start the Trust Software Installer (see chapter 7.2.1).
2. Select ‘Install Trust Photo Upload’.
3. Follow the on-screen instructions to complete the installation.
7.2.4 Ulead Photo Express 4.0 SE
Photo Express 4.0 is an application that can be used to load and edit the
photographs on your PC which you have taken using your camera. This program
requires 400 MB free hard disk space.
Follow the instructions given below to install the program.
1. Start the Trust Software Installer (see chapter 7.2.1).
2. Select ‘Open SOFTWARE menu’.
3. Select ‘Install Photo Express 4’.
4. Select the language you wish to use.
5. Follow the on-screen instructions.

TRUST 735S POWERC@M ZOOM
20
Note: During the installation, you will be requested to enter some user
information. Also enter a company name. The installation will not
continue if a company name is not entered.
7.2.5 Photo Explorer 7.0 SE Basic
Ulead Photo Explorer 7.0 SE Basic is a program which you can use to organize your
photographs.
Simple processes can be carried out, such as rotating, printing and viewing the
photographs. Photo Explorer 7.0 SE Basic is useful if you wish to download
photographs and save them on your computer.
Follow the instructions given below to install the program.
1. Start the Trust Software Installer (see chapter 7.2.1).
2. Select ‘Open SOFTWARE menu’.
3. Select ‘Install Photo Explorer’.
4. Select the language you wish to use.
5. Follow the on-screen instructions.
6. Click on ‘Finish’ to complete the installation.
7.2.6 COOL 360
COOL 360 is an image editing program that can be used to change the photographs
you have taken using your camera into panoramic photographs.
Follow the instructions given below to install the program.
1. Start the Trust Software Installer (see chapter 7.2.1).
2. Select ‘Open SOFTWARE menu’.
3. Select ‘Install Cool 360’.
4. Follow the on-screen instructions.
5. Click on ‘Finish’ to complete the installation.
7.2.7 VideoLive Mail
You can use VideoLive Mail to send e-mails which contain audio and video. The
recipient does not require any special software to view or listen to these e-mails.
In order to use the application successfully, you need to have an Internet
connection, a sound card with speakers and a microphone.
Follow the instructions given below to install the program.
1. Start the Trust Software Installer (see chapter 7.2.1).
2. Select ‘Open SOFTWARE menu’.
3. Select ‘Install Video Live Mail’.
4. Follow the on-screen instructions.
You will need the serial number to complete the installation. This is printed on
the CD-ROM or the CD envelope.
5. Click on ‘Finish’ to complete the installation.
7.3 Connecting the camera to the computer
Note: Batteries do not have to be inserted into the camera when it is connected
to a computer.