Trust 1220S POWERC@M User manual

1220S POWERC@M OPTICAL ZOOM
UK
DE
FR
IT
ES
PL
NL
PT
GR
User’s manual
V
1.0

1220S POWERC@M OPTICAL ZOOM
UK
DE
FR
IT
ES
PL
NL
PT
GR
Thank you for your purchase. Register your product via our Internet site at
www.trust.com/register, so that you will be eligible for optimal guarantee and service support. You
will also be automatically informed of the development of your and other Trust products.

1220S POWERC@M OPTICAL ZOOM
Fig. 1 Fig. 2
Fig. 3 Fig. 4
Fig. 5 Fig. 6

1220S POWERC@M OPTICAL ZOOM
Fig. 7 Fig. 8
Fig. 9 Fig. 10
Fig. 11

1220S POWERC@M OPTICAL ZOOM
Fig. 12 Fig. 13
Fig. 14

1220S POWERC@M OPTICAL ZOOM
1
UK
Read the ‘Quick Installation Guide’ before using the camera for the first time.
Contents
1INTRODUCTION............................................................................................3
1.1 GENERAL COMMENTS REGARDING PHOTOGRAPHY ..................................................... 3
2SAFETY.........................................................................................................3
2.1 BATTERIES .............................................................................................................. 3
3APPROVAL ...................................................................................................4
4DESCRIPTION OF THE CAMERA ................................................................4
4.1 DESCRIPTION OF THE BUTTONS................................................................................. 4
4.2 DESCRIPTION OF THE MODE DIAL AND THE CONTROL BUTTON ..................................... 5
4.3 LCD SCREEN........................................................................................................... 6
5MAKING THE CAMERA READY FOR USE..................................................7
5.1 INSERTING/REMOVING THE BATTERIES ....................................................................... 7
5.2 USING A MEMORY CARD............................................................................................ 7
6SETTING .......................................................................................................8
6.1 SETTING THE LANGUAGE........................................................................................... 8
6.2 FORMATTING THE MEMORY ....................................................................................... 8
7TAKING PHOTOGRAPHS ............................................................................9
7.1 AUTO FOCUS............................................................................................................ 9
7.2 ZOOMING IN AND OUT ............................................................................................... 9
7.3 FLASH ..................................................................................................................... 9
7.4 MACRO RECORDING ............................................................................................... 10
7.5 SELF-TIMER ........................................................................................................... 10
7.6 TAKE THREE IMAGES CONTINUOUSLY (BURST) ......................................................... 10
7.7 AE/AF LOCK.......................................................................................................... 10
8DISPLAY (PHOTO) RECORDINGS.............................................................11
8.1 DELETE IMAGE IMMEDIATELY................................................................................... 11
8.2 PROTECTING IMAGES.............................................................................................. 11
9VIEWING IMAGES ON A PC (WINDOWS)..................................................11
9.1 CONNECTING TO A USB PORT ................................................................................ 12
9.2 VIEWING IMAGES ON THE COMPUTER (WINDOWS) .................................................... 12
9.3 DISCONNECTING THE CAMERA ................................................................................ 12
10 CONNECTING THE CAMERA TO A TV ..................................................... 13
10.1 SETTING VIDEO OUT ....................................................................................... 13
10.2 CONNECTING THE CAMERA TO A TV: ................................................................ 13
11 TAKING PICTURES ....................................................................................14
11.1 PROGRAMMED SETTINGS (SCENE) ................................................................... 14
11.2 MANUAL SETTINGS .......................................................................................... 15
!

1220S POWERC@M OPTICAL ZOOM
2
12 RECORDING VIDEO CLIPS........................................................................ 18
13 SOUND RECORDING .................................................................................18
14 VIEWING/LISTENING TO RECORDINGS...................................................18
14.1 THUMBNAIL IMAGES ......................................................................................... 18
14.2 VIEWING IMAGES ENLARGED ............................................................................ 20
14.3 DELETING RECORDINGS................................................................................... 20
14.4 PROTECTING IMAGES....................................................................................... 20
14.5 PLAYING BACK SOUND OR VIDEO RECORDINGS................................................. 20
14.6 MENU OPTIONS ............................................................................................... 20
15 SETTINGS...................................................................................................21
16 DIRECTORY STRUCTURE .........................................................................22
17 OTHER ........................................................................................................23
17.1 TRIPOD STAND ................................................................................................ 23
17.2 ATTACHING THE STRAP .................................................................................... 23
18 TRUST PHOTO SITE / TRUST PHOTO UPLOAD SOFTWARE ................. 23
19 ULEAD PHOTO EXPLORER 8 SE BASIC (WINDOWS).............................24
19.1 INSTALLATION ................................................................................................. 24
19.2 USE................................................................................................................ 24
20 USE WITH AN APPLE MACINTOSH ..........................................................25
21 INSTALLATION........................................................................................... 25
21.1 CHECKING AFTER THE INSTALLATION ................................................................ 25
21.2 REMOVING SOFTWARE..................................................................................... 26
22 TECHNICAL INFORMATION ......................................................................30
22.1 OVERVIEW OF INDICATORS............................................................................... 31
22.2 OVERVIEW OF MESSAGES ON LCD SCREEN...................................................... 32
23 WARRANTY CONDITIONS......................................................................... 32

1220S POWERC@M OPTICAL ZOOM
3
UK
1 Introduction
This instruction manual is for users of the 1220S POWERC@M OPTICAL ZOOM.
This camera is an advanced model for the demanding user.
The various possibilities built into the camera allow it to be used not only for taking
photos but also as a video camera and a dictaphone. It is posible to carry out simple
editing when the camera is in display mode.
Read this manual carefully in order to get the best out of the camera.
1.1 General comments regarding photography
Test photograph
Before you start photographing a unique event, it is a good idea to first take a number
of test photographs. This will help to ensure that the camera works as required.
No compensation for unsuccessful photographs
No compensation may be claimed for unsuccessful photographs as a result of a faulty
camera, faulty software, etc.
Exchanging photographs and video clips
No guarantees are given that photographs and video clips produced with this camera
can be displayed on other devices or that photographs and video clips produced with
other devices can be displayed using this camera.
Sunlight
Do not aim the camera directly at the sun for a long period of time.
Shaking/knocks
Shaking/knocks Do not shake the camera or knock it against anything. This may
cause a fault, unsuccessful photographs, memory incompatibility or the loss of
photographs from the memory.
LCD display
There may sometimes be small black or clear dots visible on the LCD screen. This is
normal and does not affect the photographs. There is no reason to exchange the
camera if there are 10 dots or less.
Exposing the LCD screen to direct sunlight for a long period of time may cause faults.
Lens
Keep the glass of the lens clean. Use a cotton bud to clean the lens. If necessary
immerse this in special cleaning fluid for camera lenses. Do not use a different type
of cleaning product.
2 Safety
Carefully read the following instructions before use.
- The Trust 1220S PowerC@m Optical Zoom does not require any special
maintenance. Use a slighlty moist soft cloth to clean up the camera.
- Do not use aggressive substances, such as petrol or white spirit, to clean the
device. These may harm the material.
- Never immerse the camera in a fluid. This may be dangerous and will damage
the device. Do not use the device near water.
- Do not repair this device yourself.
2.1 Batteries
- The Duracell Ultra batteries supplied with the device are not rechargeable. Do
not try to recharge them. This can give rise to danger of an explosion.

1220S POWERC@M OPTICAL ZOOM
4
- Never throw the batteries onto an open fire. The batteries may explode.
- Never drill holes into the batteries.
- Keep the batteries out of reach of small children.
- Only use AA alkaline or rechargeable AA NiMh (minimum 1800 mAh) batteries
with this camera.
- When the alkaline batteries (including Duracell Ultra batteries) are flat, ask
your local authority where you can dispose of them.
3 Approval
This device meets the essential requirements and other relevant conditions of the
applicable European directives. The Declaration of Conformity (DoC) is available at
www.trust.com/13818/ce.
4 Description of the camera
4.1 Description of the buttons
See Figure 1.
Item Description Function
1 Shutter Press this button to take a photograph. This
button is also used to start and stop
recording a video clip.
2 On/off button Button to turn the camera on/off.
3 Speaker Emits sound.
Table 1: functions on the top of the camera
See Figure 2.
Item description Function
1 Flash The flash allows photos to be taken in places
where there is not much light. You can also
use the flash to avoid unwanted shadows in
places which are very well lit.
For more information: Section 7.3.
2 Image finder The viewfinder is used to determine the size
and the position of the photograph. The
actual photograph is recorded by the lens
and not the viewfinder.
3 Automatic exposure light Flashes when the automatic exposure
function is used. Table 21.
4 Microphone This records the sound.
Lens The lens sets the correct lighting in the
electronic circuits which register the image.
Make sure that no dust, fingerprints or
scratches come on the lens.
5
Lens protector Protects the lens when the camera is not in
use.
Table 2: functions on the front of the camera

1220S POWERC@M OPTICAL ZOOM
5
UK
See Figure 3.
Item Description Function
1 “LCD” button Switches the LCD screen on and off and displays
certain details.
For more information see Section 4.3.
2 “AE/AL lock” button Button for setting the exposure method. See
Section 7.7
3 “Flash” button Button for setting the flash. See Section 7.3.
4 Status light Displays the status of the camera. Table 21.
5 Image finder The viewfinder is used to determine the size and
the position of the photograph.
6 LCD screen To display the photos or video clips.
Can also be used as image finder.
To display the camera settings and menus.
7 “Zoom in” button
()/ “Zoom out” ( )
To zoom in (the object will appear closer by).
To zoom out (the object will appear further away).
8 Mode dial. To set the required option. For more details, see
Figure 5, Table 5 and Table 6.
9 Control button Control button with 4 directional positions.
Press the control button (“OK” button) to confirm a
selection.
Direct access to macro, automatic exposure and
burst mode when in recording mode.
Direct access to delete image or save when in
display mode.
10 “Menu” button Opens the menu.
Table 3: functions at the rear of the camera
See Figure 4.
Item Description Function
1 Battery – memory cover Protects the batteries and the memory.
2 USB-, TV-Out and
voltage adapter exit
(behind the rubber
cover).
Connection to connect the camera to the
USB port of your computer, the video in on
your television, or to a voltage adapter (see
solving problems).
Table 4: functions on the side (left and right) of the camera
4.2 Description of the mode dial and the control button
See Figure 5.
Item Description Possibilities Chap-
ter
Scene mode Camera with various preprogrammed
settings.
11.1
Recording
mode
Set the camera for either automatic or
manual settings.
11.2

1220S POWERC@M OPTICAL ZOOM
6
Display mode Display the photos and videos recorded
and plays the recorded sound.
8, 14
Video mode Record a video with sound. 12
Audio mode Record a sound or memo. 13
Setup mode Set the basic camera settings 15
Table 5: mode dial possibilities
Item Description Possibilities Chap-
ter
Macro mode Set camera for close-up photos (15–50
cm).
7.4
Self-timer Set camera for automatic exposure
function.
Photo will be taken three or ten seconds
after the shutter has been pressed.
7.5
Burst mode Set the camera to take three photos
within 1 second.
7.6
Delete recording Delete the last recording immediately. 8.1
Protect Protect recording against deleting. 8.2
Table 6: functions of the control button
4.3 LCD screen
Press the “LCD” button (1, Figure 3) to change the display on the LCD screen. See
the table below.
Modes
“LCD”
button
Scene
Capture Playback
Video Audio
1 ON Basic
(number /
quantity)
ON Recording
information
2 Setting information Basic details Recording
information
OFF
3 3x3 grid Recording
information
OFF
4 Information off off
5 OFF
Table 7: display on LCD screen
Histogram function: Histogram Value showing the brightness and
contrast of the subject. It enables precise exposure control. In playback
mode, histogram shows the brightness and contrast information of
recorded pictures. You can set the Histogram display by pressing the
display button in shooting and playback modes.

1220S POWERC@M OPTICAL ZOOM
7
UK
5 Making the camera ready for use.
5.1 Inserting/removing the batteries
Follow the instructions given below to insert or remove the batteries
N.B.: switch the camera off before opening the battery cover.
Open the battery cover (1, Figure 4). Insert the batteries into the battery compartment
as indicated on the inside of the battery holder. Close the battery cover.
N.B.: it is normal for the camera casing to become warm when using
the camera.
N.B.: after inserting/replacing the batteries, you will have to reset the
date and the timeError! No bookmark name given..
N.B.: turn off the LCD screen to increase the lifetime of the batteries.
The state of the batteries will be displayed temporarily on the LCD screen. The
pictogram will be displayed on the LCD screen for about 10 seconds everytime a
change is made.
If the batteries are nearly flat the battery symbol will flash red (for about 10 seconds).
The text [battery empty] will be displayed on the screen and the camera will switch
off.
Note: the camera has an energy saving function. Set this correctly. See
chapter 15.
Lifetime of batteries: Ni-MH battteries are recommended rather than alkaline batteries
for use with digital cameras. Use at least Ni-MH 1800mAh rechargeable batteries.
Trust has various Ni-MH battery chargers + batteries in its range. (see
www.trust.com/battery-chargers)
N.B.: standard AA NiCd batteries are unsuitable for use with this
device.
N.B.: do not use old and new batteries at the same time, because the
old batteries may deplete the new ones.
N.B.: if the camera is not to be used for a long time remove the
batteries. This will save the battery capacity.
5.2 Using a memory card
This camera has a 14 MB internal memory which allows number of photographs to
be saved on it, see Table 19 and Table 20.
Trust recommends that a certified SD (Secure Digital) or MMC (Multi Media Card)
memory card with greater capacity be purchased. This allows more photos to be
saved in the memory.
Note: because there are a large number of SD cards on the market it is
possible that an SD card will not be compatible with this camera.
It is recommended that the SD card is tested in the camera
before purchasing it.
5.2.1 Inserting/removing a memory card
Follow the instructions given below to insert a memory card.
N.B.: switch the camera off before opening the battery cover.
Open the battery cover (1, Figure 4) and fit the memory card as shown in the memory
card holder, see Figure 6. Press the memory card into the slot until it clicks into
place.

1220S POWERC@M OPTICAL ZOOM
8
Remove the memory card by pushing it so that the lock is released. Remove the
memory card from the camera
Format the memory card before using it for the first time. See Section 6.2.
N.B.: the memory card can only be inserted into the camera in one way. Do
not force the card into the slot. This could damage both the memory
card and the camera.
N.B.: NEVER remove a memory card whilst the camera is still processing
data (Indicator lamp flashes green (4, Figure 3). This will result in loss
of data or faults.
If there is a MMC/SD card in your camera new photos will be saved on this card. If
there is no card in the camera new photos will be saved in the internal memory.
6 Setting
6.1 Setting the language
The camera can display text and messages in English (Standard), German, French,
Spanish, and Italian. To select a different language:
1. Switch the camera on. Press button 2, Figure 1.
2. Set the camera to “SETUP” ( ), using the mode dial.
3. Select [Language] ( ) using the control button “up”/”down”.
4. Select the desired language using the control button “right”/”left”.
5. Press the “OK” button to confirm the language selected.
The language chosen will be saved in the camera. The language does not have to be
reset after changing the batteries.
If the camera is set back to the factory settings [Restoring] ( ) then the language will
have to be reset.
6.2 Formatting the memory
Use this function when you use a memory card for the first time in this camera or if
the camera makes faults when reading or writing the recordings.
Follow the instructions given below to format the memory.
N.B.: format the memory card before using it for the first time.
N.B.: all data on the memory card will be deleted.
1. Set the camera to “SETUP” ( ).
2. Select [Format] ( ) using the control button “up”/”down”.
3. Press the “OK”.button.
[Format SD Card?] will be displayed on the LCD screen.
4. Press the “OK” button to format the memory card. Press the “MENU” button if
the memory card is not to be formatted.
N.B.: if there is no memory card in place the internal memory will be
formatted. [Format Internal memory?] will then be displayed on
the LCD screen.
N.B.: do not format the memory or a memory card using the format
instruction from Windows or Macintosh. This will make the
memory unusable.

1220S POWERC@M OPTICAL ZOOM
9
UK
BASIC USE
7 Taking photographs
1. Turn the camera on (2, Figure 1).
2. Set the camera to recording mode ( ) using the mode dial. The camera will
make the correct settings automatically when in this mode.
3. Look through the image finder or on the LCD screen and fix the object that
you want to photo.
4. Press the shutter in completely. The photo will be taken and saved in the
memory. You can now take the next photo.
7.1 Auto focus
When the shutter release is pressed halfway, the Auto-Focus function will be
activated and the camera lens will be focused automatically. Follow these steps to
activate this function:
1. In normal situations, the crop mark is yellow. Once the shutter is pressed
halfway to activate the Auto Focus function, the crop mark will turn green.
If this fails, the crop mark will turn red. Move the camera a bit and try again.
2. Fully press the shutter button to take the picture.
7.2 Zooming in and out
This camera has optical (3x) and digital (4x) zoom.
You can use the Zoom In (button “ ”) or Zoom out (button “ ”) (Figure 3, 7) to
decrease or increase the range of the lens. Use the LCD screen or the optical
viewfinder to see the effect of zooming. See the zoom bar on the LCD screen as well
(Figure 7).
N.B.: this function does not work if Macro is switched on.
7.2.1 Digital Zoom
The digital zoom allows you to bring the image 4x closer. Zoom in on the object
completely (hold button “ ” pressed in completely).
N.B.: using digital zooming reduces the image quality.
N.B.: digital zoom does not work if the resolution is 6 Megapixels.
N.B.: digital zoom is not shown in the image finder.
7.3 Flash
The flash will provide extra light for the photo if there is too little light. The flash is
normally turned off. The flash works best within a distance of 1.0 to 3.0 metres.
Setting: Press the “flash” button repeatedly (3, Figure 3) until the right setting
has been reached.
Switched off The standard flash setting. The flash does not work.
Automatic The flash will be used automatically. The flash flashes
more than once to suppress the red eye effect.

1220S POWERC@M OPTICAL ZOOM
10
Slow Sync The flash will go off automatically but a little bit later
than the shutter. This setting can be used if a longer
exposure time is being used.
Switched on The flash is switched on and will flash with every photo.
Table 8: flash settings
Hint: you can use the flash if you have back light. This will improve the
photo.
N.B.: do not use the flash if “Macro” is set to prevent over-exposed
photos.
N.B.: the flash cannot be set if the batteries are nearly flat.
N.B.: the flash cannot be set when the function “take three images
continuously" has been set.
7.4 Macro recording
Set Macro if you want to take a close-up photograph. The best distance for using
macro is 15 – 50 cm.
Setting: press the control button “up” once. The macro symbol : will appear on the
LCD screen.
Hint: switch the flash off when you take a macro photo. This prevents
over exposure.
N.B.: if macro is set it is not posible to zoom in on an object.
7.5 Self-timer
Set the self-timer if you want to take a self-portrait or a macro photo (close-up), for
example.
Setting: press the control button “up” once. : the self-timer symbol will appear on
the LCD screen.
N.B.: you cannot use the self-timer together with the “Take three
images continuously” function.
Hint: the time length (3 or 10 seconds) of the self-timer can be set in
the Setup menu. See chapter 15.
7.6 Take three images continuously (Burst)
Three images continuously one after the other can be taken. The interval between
the photos is about 0.5 seconds.
Setting: Press the control button “up” twice. The symbol for “Burst” will
appear on the LCD screen.
N.B.: you cannot use burst at the same time as the self-timer.
N.B.: the flash cannot be set when this function is switched on.
7.7 AE/AF lock
AE lock: Correct exposure of objects which are not in the middle of the image.
1. Aim the camera so that the object that must be exposed correctly is in the
middle of the image finder.
2. Press the AE button to save this setting.

1220S POWERC@M OPTICAL ZOOM
11
UK
3. Now aim the camera so that the picture to be taken is shown in the image
finder.
4. Press the shutter button.
AF lock: Correct focus on objects which are not in the middle of the image.
1. Aim the camera so that the object that must be focussed correctly is in the
middle of the image finder.
2. Press the AE button to save this setting.
3. Now aim the camera so that the picture to be taken is shown in the image
finder.
4. Press the shutter button.
8 Display (photo) recordings
1. Switch the camera on.
2. Set the camera to Display mode ( ) using the mode dial.
3. The last photograph will be displayed on the LCD screen.
Press the control button “left”/”right” to go to the previous or next photograph or video
clip.
The photos in the internal memory will be displayed immediately. If there is a
MMC/SD card in your camera the recordings on the card will be displayed.
8.1 Delete image immediately
The image shown on the LCD screen can be deleted at once.
To do this: press the control button “down” ( ).once. An options choice will appear
on the screen. Press the “OK button” to delete the photograph.
For more information about deleting images, see Section 14.3.
Formatting the memory: see Section 6.2.
8.2 Protecting images
The image can also be protected to prevent deleting by mistake.
To do this: press the control button “up” ( ).once. An options choice will appear on
the screen. Press the “OK” button to set the protection for this image.
A lock will appear at the top of the LCD screen. Repeat the instruction given above in
order to cancel the protection.
For more information about protecting images, see Section 14.4.
N.B.: protection does not work when the memory is formatted.
9 Viewing images on a PC (Windows)
Note: for use with a Macintosh computer see Chapter 20.
Order:
1) Connect the camera to a computer
1a) Install the driver program on your computer (Windows 98SE)
2) View the images
3) Disconnect the camera

1220S POWERC@M OPTICAL ZOOM
12
N.B.: the latest drivers are always available on www.trust.com/13818.
Check whether a new version is available and if so use it for your
installation.
N.B.: in the example, ‘D:\’ is used to indicate the CD-ROM drive. This
may be different for your computer.
9.1 Connecting to a USB port
1. Connect the USB cable to the camera’s USB port (2, Figure 4).
2. Connect the other end of the USB cable to the USB port of your computer.
(see the computer manual)
3. Switch the camera on by hand (2, Figure 1), if the camera is not already
switched on or if it does not switch on automatically.
4. Windows XP, 2000, ME: new hardware will be found and the driver program
will be installed automatically.
Windows 98SE: new hardware will be found and must be installed manually.
a. Click on “Next”
b. Select “Search for the best driver for your device (recommended)”
and click “Next”
c. Type ‘[D:\DRIVER]’ and click “Next”
d. Click on “Next”
e. Click on “Finish”
While the camera is being installed two “removable disks” will be installed. See Figure
8.
First “removable disk”. save location for the internal memory.
Second “removable disk”. save location for the memory card.
9.2 Viewing images on the computer (Windows)
1. Windows XP: Figure 9 will appear. Select “Open folder to view files” and click
on “OK”.
Windows 2000, ME, 98SE: double click on “My computer” and then double
click on “Removable Disk”
2. Then open the folder "DCIM" and "1004MSCD". The pictures taken with the
camera are saved in this folder. See Figure 10 and Table 17.
3. Double click on the image to view it with a suitable program.
File format Play with (as example)
JPG Internet Explorer
HTM (WAV+JPG) Internet Explorer
ASF Windows Media Player 7 or later version
(version 9 recommended)
WAV Windows Media Player
You can place your photos on www.trustphotosite.com so that your family, friends
and acquaintances can view them. See Chapter 18.
You can archive your photos easily using Ulead PhotoExplorer 8.0 SE Basic. See
chapter 19.
9.3 Disconnecting the camera
See the Quick Installation Guide.

1220S POWERC@M OPTICAL ZOOM
13
UK
Carry out the procedure given below for Windows ME, 2000 and XP to disconnect
your camera from the computer.
1. Close the program that is using the “Removable disk”.
2. Click once with the left-hand mouse button on the USB pictogram in the task
bar. (Unplug or Eject hardware)
3. Click on “Stop USB Mass Storage Device – Drive (E:, F:)”
4. Remove the USB cable from the camera when the message that the
hardware has been removed safely appears.
For Windows 98SE: close the program that is using the “Removable disk”. When the
green LED (4, Figure 3) lights up permanently the camera can be disconnected.
See the Windows help function for more information
N.B.: if the camera is not disconnected in the manner described above
the camera memory could be damaged.
N.B.: if the message that the apparatus cannot be removed appears
check whether a program that uses the camera is open or see
the Windows help function.
10 Connecting the camera to a TV
The camera can be connected to a TV to view your pictures and / or video-clips. The
LCD screen will be turned off. A standard RCA video cable is supplied with the
camera.
10.1 Setting Video Out
The camera is set standard to PAL. Change the setting to NTSC if necessary. Follow
the steps given below. Otherwise continue with Section 10.2.
1. Turn the mode dial to SETUP mode ( ).
2. Select ‘TV Out’ ( ).
3. Use the control button “left”/”right” to select the correct setting.
PAL: Europe
NTSC: Asia, America etc
4. Press the “OK” button to save the setting.
10.2 Connecting the camera to a TV:
1. Connect one end of the video cable to the camera’s video out connection.
This is diagonally above the USB connection.
2. Connect the other end of the video cable to your TV.
3. Your TV must have an input for video signals (yellow RCA plug). The yellow
plug is for the picture signal. You will need an adapter if your TV only has a
SCART plug. This can be purchased from most TV and radio shops. If
necessary see the manual for the TV.
4. Set your TV to the video input display.
5. Turn on your camera. The camera’s image will now be visible on your TV.
Note: make sure to that PAL is set for use in Europe. Setting to the
wrong standard makes the screen fuzzy and everything will be
displayed in black and white.
Note: the camera’s video output is not suitable for connecting to your
TV’s aerial connection. Your TV must have a Video-in
connection.

1220S POWERC@M OPTICAL ZOOM
14
Note: if you do not see an image and hear a loud humming sound
through the speakers, then you may have connected the image
plugs to the wrong connection. Check the connections and try
again.
ADVANCED SETTINGS
11 Taking pictures
11.1 Programmed settings (Scene)
Various scenes can be photographed using the settings defined beforehand. You do
not have to keep changing the settings therefore if you want to take a different type of
scene. For example, you want to photograph a landscape. You do not have to
change the settings, but simply select [Landscape]. All the relevant camera settings
will then be adapted automatically.
1. Set the camera to “Scene”-mode ( )
2. Press the “Menu” button.
3. Three options can be set, namely:
Scene: , (11.1.1)
4. Resolution: , (11.1.2)
5. Compression:
(11.1.3)
6. Use the control button “above”/”below” for this
7. The possibilities per option can be set using the control button “left”/”right”.
8. Press the “OK” button to confirm the selection.
11.1.1 Scene Settings
symbol Mode Description
Auto Automatic setting.
Sport
[Sport]
This focus is set to give the best possible
pictures of rapid movement, such as Sport.
Landscape
[Landscape]
This focus is set to give the best possible
landscape pictures with the lens focussing
evenly spread over the distance.
Night
[Night view]
This focus is set to give the best possible
pictures in conditions when there is little light.
There is a longer exposure time. The flash will
be used.
N.B.: it is recommended that the stand is used
when this function is chosen.
Portrait
[Portrait]
This focus setting is set to give the best
possible portrait photos. The person will be
shown clearly with the background less clear.
Self portrait
[self portrait]
Allows you to take a self portrait while holding
the camera. Turn the lens towards you and take
the picture.
Night portrait
[Night portrait]
This setting is for taking pictures during a storm
or at night (dark).
The flash will illuminate the ob
j
ect while the

1220S POWERC@M OPTICAL ZOOM
15
UK
symbol Mode Description
background will be given normal exposure
because of the long shutter time.
Sunset [Sunset] Setting for taking pictures at sunset.
Beach
[Beach]
Taking pictures on the beach, with excess blue
colours.
Backlight
[backlight]
For taking pictures with backlight by setting the
light measurement differently.
Autumn
[Autumn]
Setting for taking pictures of the leaves in
autumn.
Natural
[Natural]
Camera setting for woods and meadows.
Sky photos
[Sky]
Taking photographs of the sky.
Party
[Party]
Taking photos in dark surroundings with various
light sources.
Text
[Text]
This setting is ideal for text (black/white setting).
Table 9: overview of preset possibilities
N.B.: if you use a setting which has been programmed beforehand it is
possible that certain functions, such as the flash, macro etc. will
no longer function. Change the scene or set the camera to
recording mode.
11.1.2 Resolution settings
Resolution. Number of
pixels Description
VGA 640 x 480
1.3M 1280 x 960
2.0M 1600 x 1200
4.0M 2272 x 1704
6.0M 2880 x 2160
Set the resolution required.
Low resolution, small pictures, ideal for Internet
High resolution, larger pictures, more details,
ideal for printing on paper
Table 1: resolution
11.1.3 Compression settings
Compression Item Description
Best
Better
Basic
Set the quality of the compression.
[Best]: little compression, a lot of details, larger file
[Basic]: a lot of compression, less details, smaller file
Table 2: compression
For an overview of the number of pictures per resolution/compression see Table 19.
11.2 Manual settings
Set the camera to recording mode ( ).