TSI Instruments TSI24PDABVAZZZZ User manual

User Guide
23.8” LCD Touch Screen Monitor
Model: TSI24PDABVAZZZZ

2 / 40
Table of Contents
User Guide .............................................................................................................................................. 1
1. Introduction ..................................................................................................................................... 4
1.1 Monitor Description............................................................................................................. 4
1.2 Package Contents................................................................................................................. 4
1.3 Product Overview ................................................................................................................ 5
2. Important Information..................................................................................................................... 8
2.1 Safety Information .............................................................................................................. 8
2.2 Environmental Information................................................................................................ 11
2.3 Regulatory Information...................................................................................................... 12
2.4 Equipment Symbols ........................................................................................................... 13
3. Cleaning the Display....................................................................................................................... 15
3.1 Cleaning Instructions ......................................................................................................... 15
4. Monitor Installation ....................................................................................................................... 16
4.1 Installation Procedure........................................................................................................ 16
4.2 Stand Removal & VESA Mount Installation........................................................................ 17
5. Daily Operation .............................................................................................................................. 20
5.1 Main Powerswitch.............................................................................................................. 20
5.2 Power/Status Indication..................................................................................................... 20
6. OSD Menu Operation..................................................................................................................... 21
6.1 On-Screen Display.............................................................................................................. 21
6.2 Menu Descriptions............................................................................................................. 21
6.3 OSD Structure..................................................................................................................... 22
6.4 Main Menu......................................................................................................................... 24
6.4.1 Exit.......................................................................................................................... 24
6.4.2 Picture Adjust......................................................................................................... 24
6.4.2.1 Contrast.................................................................................................................. 25
6.4.2.2 Brightness............................................................................................................... 25
6.4.2.3 Adv. Contrast.......................................................................................................... 25
6.4.2.4 ECO Mode .............................................................................................................. 26
6.4.2.5 Blue Light Reducer ................................................................................................. 26
6.4.3 Input Select ............................................................................................................ 27
6.4.4 Audio Adjust........................................................................................................... 27
6.4.4.1 Volume ................................................................................................................... 27
6.4.4.2 Mute....................................................................................................................... 28
6.4.4.3 Digital Audio........................................................................................................... 28
6.4.5 Color Adjust............................................................................................................ 28
6.4.5.1 User........................................................................................................................ 29
6.4.6 Image Adjust………………………………………………………………………………………………………29
6.4.6.1 H. Position (Analog Video Only)............................................................................. 30
6.4.6.2 V. Position (Analog Video Only) ............................................................................. 30
6.4.6.3 Clock (Analog Video Only)...................................................................................... 30
6.4.6.4 Phase (Analog Video Only)..................................................................................... 30
6.4.6.5 Sharpness............................................................................................................... 31
6.4.6.6 Video Mode Adjust ................................................................................................ 31
6.4.7 Language ................................................................................................................ 32
6.4.8 Setup ...................................................................................................................... 32
6.4.8.1 OSD Position........................................................................................................... 33

3 / 40
6.4.8.2 OSD Time Out......................................................................................................... 33
6.4.8.3 Auto Power Off....................................................................................................... 33
6.4.9 Display Information................................................................................................ 34
6.4.9.6 Reset....................................................................................................................... 34
6.5 Supported Video Modes .................................................................................................... 35
7. Technical Specifications.................................................................................................................. 36
8. Outline Dimension ......................................................................................................................... 38

4 / 40
1. Introduction
1.1 Monitor Description
The equipment is intended for general use in commercial environments for human-machine
interface (HMI) and display for reference. It was designed with high resolution, operational
safety, and long service life in mind.
1.2 Package Contents
⚫23.8” LCD Touch Screen Monitor
⚫AC Power Cord
⚫HDMI 1.4 Cable
⚫USB Cable
⚫Stand

5 / 40
1.3 Product Overview
Front View
The image below shows the front view of the display.
4
Image 1-1 Front view
1. P-CAP touch screen
2. Bezel
3. LED
1
3
3
2

6 / 40
Side View
The image below shows the control key located in the right bottom corner of the display.
4
Image 1-2 Control Key
1. Menu/Enter key / Scrolling key
1

7 / 40
Rear View
Image 1-3 Rear view
1. Rear cover
2. IO cover
3. Monitor stand
4. Hinge cover
1
3
4
4
2
2

8 / 40
2. Important Information
2.1 Safety Information
General Recommendations
Read the safety and operating instructions before operating the device.
Save the safety and
operating instructions for future reference.
Adhere to all warnings on the device and in the operating instructions manual. Follow all
instructions for operation and use.
Electrical Shock or Fire Hazard
To prevent an electrical shock or fire hazard, do not remove the cover.
No serviceable parts are inside. Refer servicing to qualified personnel.
Do not expose this
apparatus to rain or moisture.
Modifications to the Unit:
Do not modify this equipment without authorization of the manufacturer.
Type of Protection (Electrical):
Monitor with internal power supply: Class I equipment.
Degree of Safety (Flammable Anesthetic Mixture):
Equipment is not suitable for use in the presence of a flammable anesthetic mixture of air,
oxygen
, or nitrous oxide.
Mission Critical Applications
We strongly recommend for there to be a replacement monitor immediately available in mission
critical applications.
Transient Over-Voltage
To fully disengage the power to the device, please disconnect the power cord from the AC inlet.

9 / 40
Power Cords:
Do not overload wall outlets and extension cords as this may result in fire or electric shock.
Main leads protection (U.S.: Power cord): Power cords should be routed so that they are not
walked upon or pinched by items placed upon or against them. Pay particular attention to
cords at plugs and receptacles.
The power supply cord should be replaced by the designated operator only at all times.
Use a power cord that matches the voltage of the power outlet, which should be approved
and in compliance with the safety standard of your particular country.
Avoid placing the monitor near places that is hard to reach or difficult to disconnect the
power supply cord.
“WARNING: To avoid risk of electric shock, this equipment must only be connected to a
main supply with protective ground”
"AVERTISSEMENT : Pour éviter tout risque d'électrocution, cet équipement ne doit être connecté qu'à
une alimentation principale avec mise à la terre de protection"
Grounding Reliability
Grounding reliability can only be achieved when the equipment is connected to an equivalent
receptacle.
Liquids and Moisture
Never expose the monitor to liquids or moisture.
Never use the monitor near water - e.g., near a bathtub, washbasin, swimming pool, kitchen
sink, laundry tub or in a wet basement.
Ventilation
Do not cover or block any ventilation openings in the cover of the set. When installing the device
in a cupboard or another closed location, heed the necessary space between the set and the
sides of the cupboard.
Installation
Place the device on a flat, solid, and stable surface that can support the weight of at least 3
devices. If you use an unstable cart or stand, the device may fall, causing serious injury to a child
or adult, and serious damage to the device.

10 / 40
Caution
To prevent fire or shock hazards, do not expose this monitor to rain or moisture. Also, do not
use this monitor’s polarized plug with an extension cord receptacle or other outlets unless the
prongs can be fully inserted.
To avoid the risk of electric shock, this equipment must only be connected to a main supply with
protective ground connection.
Modifications of any type on this equipment is not permitted. Modifications can only be
performed by the manufacturer.
Refrain from opening the cabinet as there are high voltage components inside. Please refer to
manufacturer for any service needs.
To prevent the risk of electric shock, make sure power cord is unplugged from wall socket. To
fully disengage the power to the unit, please disconnect the power cord from the AC outlet. Do
not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service
personnel. The AC outlet shall be readily available and accessible.
ATTENTION
Pour éviter tout risque d'incendie ou d'électrocution, n'exposez pas ce moniteur à la pluie ou à
l'humidité. De plus, n'utilisez pas la fiche polarisée de ce moniteur avec une prise de rallonge ou
d'autres prises à moins que les broches ne puissent être complètement insérées.
•Pour éviter tout risque d'électrocution, cet équipement ne doit être connecté qu'à une
alimentation principale avec mise à la terre de protection.
Aucune modification de quelque nature que ce soit sur cet équipement n'est autorisée. Les
modifications ne peuvent être effectuées que par le fabricant.
S'abstenir d'ouvrir l'armoire car il y a des composants haute tension à l'intérieur. Veuillez vous
référer au fabricant pour tout besoin de service.
Pour éviter tout risque d'électrocution, assurez-vous que le cordon d'alimentation est
débranché de la prise murale. Pour couper complètement l'alimentation de l'appareil, veuillez
débrancher le cordon d'alimentation de la prise secteur. Ne retirez pas le couvercle (ou le dos).
Aucune pièce réparable par l'utilisateur à l'intérieur. Confiez l'entretien à du personnel
d'entretien qualifié. La prise secteur doit être facilement disponible et accessible.

11 / 40
2.2 Environmental Information
Disposal Information
Waste Electrical and Electronic Equipment
This symbol on the product indicates that under the European Directive 2012/19/EU,
governing waste from electrical and electronic equipment, this product must not be disposed of
with other municipal waste. Please dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and electronic equipment. To
prevent possible harm to the environment or human health from uncontrolled waste disposal,
please separate these items from other types of waste and recycle them responsibly to promote
the sustainable reuse of material resources.
For more information about recycling of this product, please contact your local city office or your
municipal waste disposal service.
RoHS
EU Directive 2011/65/EC and 2015/863/EU.
On the restriction of certain hazardous substances in electrical and electronic equipment.
This product is RoHS compliant.

12 / 40
2.3 Regulatory Information
FCC Class B
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class B digital device,
pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful
interference in a residential installation. This device generates uses
and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this device does cause
harmful interference to radio or television reception, which can be
determined by turning the
device off and on, the user is encouraged to try to correct the interference by
one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the device to an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could
void the
user’s authority to operate the equipment.
Canadian Notice
This ISM device complies with Canadian ICES-003.
Cet appareil ISM est conforme à la norme NMB-003 du Canada.

13 / 40
2.4 Equipment Symbols
Electrical and Electronic Equipment Symbols
Indicates the device meets the requirements of the applicable CE directives.
Indique que l'appareil répond aux exigences des directives CE applicables.
Indicates compliance with Part 15 of the FCC rules (Class A or Class B)
Indique la conformité à la partie 15 des règles de la FCC (classe A ou classe
B)
Indicates the device is approved according to the UL regulations for Canada
and US.
Indique que l'appareil est approuvé conformément aux réglementations UL
pour le Canada et les États-Unis
A ‘Cadmium free’ logo shall be used if concentration values of Cadmium (Cd)
by weight in any homogeneous material part of the display does not exceed
0,01 % as defined in Directive 2011/65/EU.
Un logo « sans cadmium » doit être utilisé si les valeurs de concentration de
cadmium (Cd) en poids dans une partie matérielle homogène de l'affichage
ne dépassent pas 0,01 %, comme défini dans la directive 2011/65/UE.
Indicates the USB connectors on the device
Indique les connecteurs USB sur l'appareil
Indicates the Display Port connectors on the device
Indique les connecteurs Display Port sur l'appareil
Indicates the legal manufacturer
Indique le fabricant légal
Indicates the manufacturing date
Indique la date de fabrication
Indicates the temperature limitations for the device to safely
operate within specs.
Indique les limites de température pour que l'appareil puisse
fonctionner dans les spécifications.

14 / 40
Indicates the device serial number
Indique le numéro de série de l'appareil
Indicates the device part number or catalog number
Indique le numéro de série de l'appareil
Warning: dangerous voltage
Attention : tension dangereuse
Caution
Mise en garde
Indicates this device must not be thrown in the trash but must be recycled,
according to the European WEEE (Waste Electrical and Electronic
Equipment)
directive
Indique que cet appareil ne doit pas être jeté à la poubelle mais doit être
recyclé, conformément à la directive européenne DEEE (Déchets
d'équipements électriques et électroniques)
Indicates Direct Current (DC)
Indique le courant continu (DC)
Indicates Alternating Current (AC)
Indique le courant alternatif (AC)
Stand-by
Etre prêt
Power ON. Power connection to the mains
Allumer. Raccordement électrique au secteur
Power OFF
Éteindre
Protective earth (ground)
Terre de protection (masse)

15 / 40
3. Cleaning the Display
3.1 Cleaning Instructions
To clean the display
Cleaning the display using a sponge, soft clean cloth, or soft tissue with lightly moistened
recognized cleaning product for the equipment. Read and follow all labeled instructions
on the cleaning product. In case of doubt about a certain cleaning product, use plain water.
CAUTION:
•Be careful not to damage or scratch the front glass or LCD screen. Use caution when
wearing rings or other jewelry and do not apply excessive pressure to the front
glass or LCD screen.
•Do not apply or spray liquid directly on to the display as excess liquid may cause
damage to internal electronics. Instead, apply the liquid to a cleaning sponge,
soft clean cloth, or tissue.
ATTENTION :
⚫Veillez à ne pas endommager ou rayer la vitre avant ou l'écran LCD. Soyez
prudent lorsque vous portez des bagues ou autres bijoux et n'appliquez pas une
pression excessive sur le verre avant ou l'écran LCD.
⚫N'appliquez pas ou ne vaporisez pas de liquide directement sur l'écran car un
excès de liquide peut endommager l'électronique interne. Au lieu de cela,
appliquez le liquide sur une éponge de nettoyage, un chiffon doux et propre ou un
mouchoir en papier.

16 / 40
1
2
3
4
5
6
7
8
9
10
4. Monitor Installation
WARNING: Sufficient expertise is required to install this equipment. All devices
and
complete setup must be tested before operation.
AVERTISSEMENT : Une expertise suffisante est requise pour l'installation de cet
équipement. Tous les appareils et la configuration complète doivent être testés
avant d'être mis en service.
4.1 Installation Procedure
To install your monitor
To get access to the connectors, put the display on a flat surface.
1. Connect one or more video source(s) to the corresponding video inputs of the monitor.
Use the appropriate video cable(s) to do this.
2. Connect the USB connector for touch screen function.
3. Connect the Audio cable for audio function.
4. Connect the power cord input to a grounded Power Outlet.
5. Install cable cover back on the monitor.
Available Connection
Available connections (bottom view)
No
Name
Connection Type
Remarks
1
USB TOUCH
USB type-B
Touch screen signal output
2
AC Input
AC Socket 3Pin
Insert the AC power cord
3
LINE IN
3.5mm stereo phone jack
Audio signal input
4
HEADPHONE
3.5mm stereo phone jack
Audio signal output
5
DP
DisplayPort
DisplayPort signal input
6
HDMI
HDMI
HDMI signal input
7
VGA
D-Sub 15
VGA signal input
8
USB HUB
USB type-B
USB upstream port. Connect to the system
9
USB HUB
USB type-A*2
USB downstream port. Connect to USB device
10
GND Post
Ground Stud / Screw
Connect to the system to earth ground

17 / 40
4.2 Stand Removal & VESA Mount Installation
This monitor provided with a validated stand. The monitor has been designed to be used in
landscape position with a maximum tilt of -5° forward to 30° backward. If a different stand is
needed in the final application, the monitor VESA interface (VESA 100 mm standard) could be used.
To remove the stand and install the VESA mount
1. Place the monitor face down on a flat, solid and stable surface.*
2. Remove the stand cover
3. Unscrew the 4x M4 (length: 10mm) screws fixing the stand and rear cover
4. Remove the stand and install the VESA mount.
*Caution: Use a protective cloth or soft cushion to avoid damaging or scratching the monitor
and LCD screen.
*Attention : Utilisez un chiffon de protection ou un coussin doux pour éviter d'endommager
ou de rayer le moniteur et écran ACL.
Tip: Store the fixation screws at a known place for possible future use.
Image 4-2-1 Remove the hinge cover

18 / 40
Image 4-2-2 Remove the 4x M4 screws
Image 4-2-3 Remove the stand from the monitor.

19 / 40
5. Attach the monitor in landscape position to a 100 mm VESA mounting bracket. If mounted
in portrait position, the OSD menu cannot be rotated.
Image 4-2-4 VESA mount is located at the back of the monitor.

20 / 40
5. Daily Operation
5.1 Main Power switch
The monitor is switched on or off with the main switch, see image 1-2 Control key.
5.2 Power/Status Indication
During start-up the monitor performs signal detection before going into normal operation
mode. Depending on the detection result, the status LED on the side of the monitor will show
different LED color.
Below is an overview of the possible status LED modes:
LED Color
Status LED modes
Operation Description
OFF (No LED)
OFF mode
Monitor is not powered.
Green, static
Normal mode
Monitor is ON, video sync OK.
Amber, static
Stand-by mode
(Power saving)
Automatically enters power saving and standing by
for input signal