Tsume HQS Final Fantasy IX Battle of Destiny User manual

®
© 2000 SQUARE ENIX CO., LTD. All Rights Reserved.
ASSEMBLY
INSTRUCTIONS

WE RECOMMEND TO PUT LATEX GLOVES ON
TO HANDLE YOUR STATUE.
PLEASE DO NOT ASSEMBLE YOUR STATUE
RIGHT AFTER YOU HAVE RECEIVED IT.
The resin material needs time to warm up at room
temperature a daytime to avoid risks of breaking.

Put the block of crystal / cloud of smoke in the expected place at
the left back of the base.
Place the 3 clouds of smoke around the base. 2 in front of the
base then the third at the back of one crystal.
2
2
1
1

Put the crystal included electronics components in the main
cloud of smoke.
Put the tail at the back of Kuja.
4
4
3
3

Place the two little shreds of fabric at the back of Kuja.
Put the dress on the expected place at the back of Kuja.
6
5
6
5

Place Kuja on one of the crystal. Put the metal rod on the expected
place on the left leg of Kuja.
Place the big shred of fabric at the back of the left leg of Kuja.
8
7
8
7

Put the right leg of Zidane in the expected place in the base.
Put the tail at the back of Zidane.
10
9
10
9

Put the 4 filling parts of the ring inside of it, placing them in the
order (A, B, C then D).
Put the daggers of Zidane in his hands.
A
B
C
D
12
11
12
11

Put the ring inside of the main cloud of smoke.
13
Place the Crystal of life at the center of the ring, by putting it at
the top of the crystal with electronic components.
14
14
13

There are 2 switches on the base. The first at the back, near to
the power supply, the second at the front behind the plate.
Place the plate « FINAL FANTASY IX » at the front of the base.
15
16
16
15
ARRIÈRE AVANT