Operation diagram
Display rotate
Signal source switcher,switch the input between video-1 and video-2
Menu,open the setting panel of the screen display function
Volume increase
Screen on-off
Volume decrease
Channel switcher
SMA connector,the receive-antenna must be connected with this connector
The main power on-off,user show turn off this button to shut down the monitor
The video-1 output and video-2 input,it uses for input the second source from the
third-party and output the source of the built-in receiver.
The power-on LED-indicator
The rapid charge slot,it applies to the rated voltage 4.2V and rated current 1A
DC-power.
The micro-usb charge LED-indicator
The micro-usb charge slot,it applies to the rated voltage 5V and rated current 1A
DC-power.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
JC7408
1
2
3 4
5
6
7 8 9 10
11
12
14 13
Installation
1
2
3
1Connect the antenna with
the SMA connector.
2Check the channel is
the same as Tx
3Swith on main power
3
Distribution
North America
Distributed by / Vertrieb :
THUNDER TIGER EUROPE GmbH,
Rudolf-Diesel-Str. 1, 86453 Dasing, Germany
For customer service please contact
Germany, Netherlands, Belgium,
Luxembourg, Austria, Italy Distributed by :
Thunder Tiger Corporation
No.7 6th Road, Industry Park,
Taichung, Taiwan 40755
For customer service please contact
Tel : 886-4-23591632
For Other Countries
Distributed by :
HRP Distributing
2034 South 3850 West Salt Lake City,
UT 84104 USA
For customer service please contact
Tel : 1-844-887-6268
Attn : TT Support