TTS Connecting Glow Tiles User manual

Connecting Glow Tiles
User Guide
www.tts-group.co.uk
Magnetic tiles that illuminate
when connected together

Important Information
¥ Please retain the information in this User Guide for future reference.
¥ Please read all instructions fully before using.
¥ To clean, wipe the surface with a clean damp cloth.
¥ Do not allow the product to come into contact with water or any other liquids.
¥ Keep the product away from direct sunlight and heat.
¥ If your product malfunctions please switch it off and then back on again to reset it.
Pack Contents
¥ Power hub
¥ 25 tiles
¥ International Charger
¥ User Guide
Know Your Product
Battery Hatch
Charging Socket
Power Button

Connecting Glow Tiles
Using Your Product
To use the Connecting Glow Tiles, press the "TTS Power On" button on the top of the charging hub. The
button will light up blue to indicate it has been switched on.
Connect any of the tiles to the hub to light them up. Once a tile has been connected to the hub, further
tiles can then be connected either to the hub or to another tile which is connected to the hub.
There are 25 tiles, 5 red, 5 blue, 5 green, 5 yellow, and 5 pink. The user will not know which colour of
the tile until it is connected and lit. The tiles are connected by magnets and will only connect one way.
Charging
¥ This product is supplied with a 5V 1A International charging adaptor.
¥ When the power hub reaches 10% battery life the power button will flash red to indicate it needs charging.
¥ To charge, connect the dc jack into the base of the power hub and then connect to the mains. The
power button will light red to show it is charging.
NB: The product cannot be used whilst charging.
¥ When fully charged the power button will light green to indicate the hub is fully charged.
¥ To use, disconnect from the mains and remove the charging cable. Once the cable has been
removed the power button will light blue.
¥ The product may take up to 1-2 hours to fully charge, this is if the battery has been fully discharged.
¥ Once fully charged the product will have life for approximately 3-4 hours in continuous use.
Battery Precautions
¥ This product is fitted with a rechargeable battery which is not user replaceable.
¥ DO NOT attempt to remove the battery packs.

Trouble Shooting
Technical Support
Please visit www.tts-group.co.uk for the latest product information.
Email [email protected] for technical support.
TTS Group Ltd.
Park Lane Business Park
Kirkby-in-Ashfield
Nottinghamshire
NG17 9GU, UK.
Freephone: 0800 318686 Freefax: 0800 137525
WARNING: Do not dispose of this product in household waste.
WARNING: Hand it over to a collection point for recycling electronic appliances.
WARNING: Not suitable for children under 36 months due to small parts- choking hazard
Made in China, on behalf of TTS Group Ltd.
TTS Product Code:
EY10018
Problem
Tiles will not light up
Solution
Ensure the tiles are fully connected to the
magnets correctly.
The hub may need recharging, plug the
adaptor into the hub to charge.
5v