Tuft & Needle Nook Nightstand User manual

Care & Assembly Instructions
Limited Warranty
100-Night Trial
Nook
Nightstand

Thank you for your purchase.
The handbook for your Nook.

Contents Caring for your Nook Nightstand
100-Night Trial
12-Year Limited Warranty
Parts & Hardware
Assembly
4
5
5
6
8

4
►Your Nook Nightstand doesn’t require special waxing or
oiling. For routine cleaning, follow the instructions below.
►Moisture and heat can damage a wood finish. To prevent
moisture damage, promptly wipe up any spills or any other
moisture. To prevent heat damage, avoid placing your
nightstand too close to heat sources such as HVAC vents
and radiators.
►Wood may expand and contract with seasonal humidity
changes. Maintaining consistent humidity levels will mini-
mize movement in the wood and help to prevent warping
of your nightstand.
Caring for your Nook Nightstand
►Avoid dragging sharp or rough objects across the surface of
your nightstand, or it will scratch.
►Over time, air and sunlight may change the color of natural
wood. To prevent fading, avoid placing your nightstand in
direct sunlight.
►Top load weight capacity: 50 lbs.
Drawer weight capacity: 5 lbs.
►To prevent tipping, we have included a Tip Kit set to secure
your Nook Nightstand to your wall. Instructions on page 16.
Dust frequently with a damp cloth,
then immediately wipe dry.
Never use solvents, harsh chemicals,
or abrasives on any finishes.
Clean as necessary with a clean
cloth and a solution of cool water
and mild detergent.

5
Thank you for purchasing a new Tuft
& Needle “Nook Nightstand.” We hold
ourselves to high standards and are
confident that you’ll be pleased with your
purchase. However, if you are dissatisfied
or if you discover a defect in your Nook
Nightstand, simply review our 100-Night
Trial Policy and 12-Year Limited Warranty
and, if you believe that you are entitled
to take advantage of their terms, please
contact us at [email protected].
All products are carefully inspected prior
to shipment. Please carefully inspect your
Nook Nightstand at the time of delivery.
PLEASE NOTE: If your Nook Nightstand or
any part of it arrives damaged, please notify
us within three (3) days of receipt of your
delivery; we will arrange for a replacement
or return/refund as necessary, and you will
not be responsible for any return fees or
shipping charges. Please reach out to us
by email at [email protected] or by phone
at [phone] to report items that are
damaged upon delivery. We reserve the
right to request images of such damage.
All claims for damage ascertainable under
initial inspection must be made within three
(3) days after you receive delivery of the
product; thereafter any physical damage
to the Nook Nightstand that you do not
report within three (3) days of delivery will
invalidate the remainder of your 100-Night
Trial.
For more information about your limited
warranty, visit:
tuftandneedle.com/legal/warranty.
100-Night Trial &
12-Year Limited Warranty 100-Night Trial Policy
PLEASE NOTE: Any physical damage to
the Nook Nightstand that you do not
report to Tuft & Needle within three (3)
days of delivery of your Nook Nightstand
will void the remainder of the 100-Night
Trial. If within the first 100 nights of using
your new Tuft & Needle Nook Nightstand
you’re not completely satisfied—for any
reason—you may return it, if it remains in
like-new condition and is undamaged, for
a full refund. Damaged product will not be
accepted for return. If you return a product
under our 100-Night Trial Policy that we
originally shipped to an address in Alaska
or Hawaii, we will be unable to refund
the shipping fees that you paid for the
original delivery. Please retain your Nook
Nightstand packaging materials to use in
the event you wish to take advantage of the
100-Night Trial.

6
Parts
Leg × 4Drawer top
If any parts/hardware appear to be missing, or further assembly direction is needed, reach out to us at [phone] or [email protected]
A B

7
Threaded bolt × 8 Spring washer × 8 Assembly tool Flat washer × 8
Hardware
Tip Kit
If any parts/hardware appear to be missing, or further assembly direction is needed, reach out to us at [phone] or [email protected]
See page 16.
C D E F
Warning
To reduce risk of tip-over:
►Install included Tip Kit. See page 16.
►Never allow children to stand, climb, or hang on this product.
►Never put heavy objects on this product.

8
Unpack all components onto a soft surface,
placing the drawer top upside down.
1
Assembly
Keep foam band around drawer while
unpacking to prevent drawer from opening.
All paper and cardboard packaging is recyclable.
Help keep it out of landfills by recycling.

9
Place one leg in a corner slot of the
drawer top , aligning the holes.
2
B
B
A
A

10
Place one spring washer and then one
flat washer on each threaded bolt .
Insert into aligned holes and gently tighten
each bolt with your fingers. Repeat for the
remaining three legs.
3
F
F
E
E
D
D

11
Using the assembly tool , tighten the two
bolts on each leg.
4C
C

12
Flip your Nook Nightstand over slowly, as the
drawer may open while turning it over to the
upright position. Twist leveling feet individually
to adjust the height and eliminate any tipping.
5

13
To remove the drawer, squeeze both handgrips
beneath the drawer and pull out gently.

14
Drywall anchor × 2 Drawer screw (short) × 2Braided cableSteel anchor × 2
Tip Kit Hardware
Drywall screw (long) × 2
G H I J K
This hardware can be used to install directly into drywall with or without an available
stud. If you don’t see your wall material listed, consult a local hardware provider.

15
Tools Needed
Phillips screwdriverDrill
L M

16
Attach a steel anchor to the back of the
drawer top using two short drawer screws
and a Phillips screwdriver .
1
Tip Kit Assembly
A
G
G
A
K
K
M
M

17
Place assembled nightstand where you’ll be anchoring
it along a wall. Leave at least 12" between the wall and
the nightstand while you work.
2

18
With the nightstand in position, place the second
steel anchor on the wall at the same height as the
steel anchor on the back of the nightstand, and mark
both holes on the wall using a pencil.
3
G
G

19
Anchoring into drywall
Drill a hole in each mark. Insert drywall
anchors into holes. Using the long
drywall screws , secure the steel
anchor to the wall.
Anchoring into drywall with wood stud
Drill a small hole in each mark. Using the
long drywall screws , secure the steel
anchor to the wall.
4a
4b
I
I
J
J
J
J
G
G
G
G

20
Loop the braided cable through the steel anchor
holes on the nightstand and the wall. Tighten the screw
cap to secure and close the cable loop.
Once your Tip Kit is installed, push your Nook Nightstand
against the wall and start using to hold your book, glass
of water, and phone.
5
H
H