Tumbl Trak Air Pit User manual

Any questions or problems, please call Tumbl Trak at
[phone]
Assembly Instructions
Air Pit
Parts:
A. Air Pit
B. Blower
C. Adjustable Adapter
Parts List
Thank you for investing in
the Tumbl Trak Air Pit.
After opening the boxes,
please check the parts list
to make sure all pieces
have arrived in good
condition. If you have any
questions during this
assembly process, please
call customer service at
1-800-331-4362.
B. C.A.

STEP 1 – Aer unboxing and rolling out
your Air Pit, locate the valve. Remove the
dust cover by turning counter clockwise
to reveal the valve pin.
Step 1 Step 1
STEP 2 – Before inang make sure the
valve is closed. To close valve push the pin
down and turn a quarter of the way around.
The pin should be slightly taller than the rim
of the valve. Connect the adapter to the
hose and insert it into the valve by pushing
down and turning clockwise to lock in place.
Turn the pump on to inate. Put the dust
cover on once inated.
STEP 3 – To open the valve and deate
the Air Pit push the pin down and turn a
quarter of the way around. The pin
should sit just below the valve rim.
Step 4 —Make sure the dust cover remains
on the valve both inated and deated to
prevent parcles from entering the valve.
Step 2
Step 2
Step 3
Step 3
Step 4
Any questions or problems, please call Tumbl Trak at
[phone]