Tumbl Trak FLY RIGHT Quick setup guide

Thank you for purchasing the FLY RIGHT. We hope
you will enjoy years of use with this
product. After opening the boxes, please check the
parts list to make sure all pieces have arrived in good
condition. If you have any questions during this as-
sembly process, please call customer service at
44 (0)2921 167 949.
FLY RIGHT
Assembly/Use Instructions
Assembly/Use Instructions
Parts List:
[A]D2 Knob/Spring Loaded Pin
[B]Pedestal
[C]Base/Column
Parts List
Parts List

 As flyer becomes steady, the flyer can then begin practicing skill
progressions with the basic one leg stunting body positions:
Liberty, Heel Stretch, Arabesque, Scale, Scorpion, Waterfall,
etc. (Flyer should be stretched out before stunting. Flyer may
want a spotter while practice the more difficult skills.)
STEP 1 - Insert the pedestal into the column attached to
the base. Adjust FLY RIGHT to the desired height.
 Place one foot squarely on the base and step up on
the platform balancing on one leg, making sure the
knee is locked out and hips are squared and centered.
 Align body so that proper stunting technique is prac-
ticed: shoulders over knees, knees over toes, core
tight, opposite leg hanging down next to the base.
 Squeeze stomach muscles and focus balancing on one leg.
STEP 2 - Hold the base while adjusting the height so it
will not slip down. Make sure the pedestal is secure with
the pin in place and the knob turned tightly to secure
the pin in place.
 
Product Guidelines
 This device is for persons not ex-
ceeding 68 Kg.
 Only one user on the FLYRIGHT at
a time.
 This product is not intended for re-
lease skills. Only one foot at a time
should be on the platform. To
switch legs, step off the equipment
and switch legs.