Tutti Bambini Alba 211056 User manual

Alba
Cot Bed
READ CAREFULLY
Assembly Instructions
IMPORTANT: RETAIN FOR FUTURE REFERENCE.

Alba
Cot Bed
211056
IMPORTANT: RETAIN FOR FUTURE REFERENCE.
READ CAREFULLY
Conforms to EN716-1:2017+AC:2019 and BS 8509:2008+A1:2011
Tutti Bambini. 1068 High Road, Whetstone, London, N20 0QP
t: + 44 (0) 208 368 5800
e: [email protected]
www.tuttibambini.com

www.tuttibambini.com
Heo,
PLEASE READ THIS LEAFLET BEFORE ASSEMBLY
Dear Customer,
Thank you for buying Tutti Bambini furniture.
Follow the instructions carefully and check that you have all the
elements including the fittings before attempting assembly. If there are
any missing or damaged parts, please inform us before you start the
assembly. Please note that incorrect assembly of your furniture will not
be a basis for a claim against the product being damaged.
In the unlikely event that your furniture is found to be faulty, we ask
that you send an email to:
[email protected] with the following information that can
be found on the white label on the outside parcel.
• Name
• Postcode
• Contact telephone number
• Sales order number (found on white label)
• Product name & colour
• Damaged part number
• A photo or video of the damaged part
Tutti Bambini guarantee your product against faulty manufacture for
a period of 12 months from date of receipt of purchase. This does not
affect your statutory rights.
3

Parts List
www.tuttibambini.com4
12 PC
Qty
4 PC
Qty 1 PC
Qty
A
ID#
B
ID# C
ID#
14 PC
Qty
D
ID#
M6x60mm
Hardware List
Nut M4x20mm
5
1
2
3
4
1
2
3

www.tuttibambini.com
A x 4PCS
C x 1PCS
43
21
Assemble both cot ends （1 and 2）
1
2
3
Assemble the two ends with one of
the cot sides （3) using 4 x A bolts
C
A
B x 4 PCS
A x 4 PCS
Assemble the two mattress support rails
（5）using 4 x A bolts and 4 x B nuts
X 2
5
D x 14 PCS
4
Assembling the cot
5
Assemble the mattress base （4）
using 14 x D bolts
D
D
D
D
D
D
D
D
DD
www.tuttibambini.com
D
5
D
D
D

Assemble the two ends with the other
cot side (3) using 4 x A bolts IMPORTANT NOTE: The bottom
mattress base position is the safest.
You should always use the cot in this
lowest position as soon as your baby
is old enough to sit up
s
5s
6
A x 4PCS
c x 1PCS
c
A
www.tuttibambini.com
Assembling the cot
6
3

1
3
2
5
1
1
Remove part 2 from part 1.
4
1
2
X 2
5
B x 4 PCS
A x 4 PCS
Assemble the two ends (1) with the two
mattress support rails (5) using 4 x A bolts
and 4 x B unts
Assemble the mattress base (4)
using 14 x D bolts
D x 14 PCS
D
D
D
D
D
D
D
D
D
D
D
DDD
www.tuttibambini.com
Assembling into a bed
7

A x 4PCS
C x 1PCS
43
21
Assemble both cot ends （1 and 2）
1
2
3
Assemble the two ends with one of
the cot sides （3) using 4 x A bolts
C
A
B x 4 PCS
A x 4 PCS
Assemble the two mattress support rails
（5）using 4 x A bolts and 4 x B nuts
X 2
5
D x 14 PCS
4
Assembling into a sofa
5
Assemble the mattress base （4）
using 14 x D bolts
D
D
D
D
D
D
D
D
DD
www.tuttibambini.com
D
8
D
D
D
Maximum load：100KG

Safety advice and maintenance
IMPORTANT! KEEP FOR FUTURE REFERENCE:
READ CAREFULLY
1. WARNING: Never leave your child unattended. The safety of your child is your responsibility.
2. The bottom mattress base position is the safest. You should always use the cot in this lowest position as soon as
your baby is old enough to sit up.
3. WARNING: Do not leave anything in the cot or place the cot close to another product, which could provide a
foothold or present a danger of suffocation or strangulation, e.g. strings, blind /curtain cords etc.
4. When choosing mattress, ensure that the height between the surface of the mattress and the top edge of the
cot side is at least 50cm for the lowest position and 20cm in the upper position.
5. There should never be a gap of more than 3cm between the mattress and the sides or ends of the cot.
6. Regularly check that nuts and bolts are secure or evidence of damage, which could make the bed unsafe.
Loose fittings can result in snagging clothes or cords posing a risk of strangulation.
7. The maximum height (i .e. upper surface) of any mattress fitted must not exceed safety mark engraved on the
inside of the cot end.
8. We recommend the use of Tutti Bambini mattress for this cot bed or a minimum mattress
measuring 70cms x 140cm.
9. WARNING: Do not use more than one mattress in the cot. Do not use a mattress with a depth greater than
100mm.
10. Clean with a damp cloth, do not use abrasives or bleach.
11. WARNING: Do not use the cot and changer if any part is broken, torn or missing and use only spare parts
approved by Tutti Bambini.
12. To prevent child injury from falls, the cot should not be used when a child can climb out from the cot.
13. Excessive chewing may damage the wood and cause splintering. If any part is damaged, stop using the cot
until the correct part has been replaced.
14. WARNING: Be aware of the risk of open fire and other sources of strong heat, such as electric bar fires, gas fires
etc in the near vicinity of the cot and changer.
15. All assembly fittings should always be tightened properly and fittings should be checked
regularly and re-tightened as necessary.
16. The cot bed is intended for use for children from birth to approximately 4 years of age. The child’s bed is
suitable for children who have outgrown the cot (approximately 18 months) up to the age of 4 years. The cot can
also be used as a sofa.
17. WARNING: Do not place this child’s bed near heat sources, windows and other furniture.
18. Children are likely to play, bounce, jump and climb on beds, therefore the child ’s bed should not be placed too
close to other furniture or windows, blind cords, curtain pulls or other strings or cords, and should be placed either
tight to any wall or have a cap of 300mm between the wall and the side of the bed.
19. This cot bed is designed to be dismantled for storage or transportation.
20. There should never be a gap of more than 30mm between the mattress and side or the ends of the cot.
Product development dictates that components may occasionally differ from the ones shown in the diagrams of
these instructions. The right to change the specifications and design of the furniture without prior notice remains
with the manufacture.
21. Any additional or replacement parts are obtained from the Tutti Bambini or its distributor.
Guarantee
All our products are produced from the finest quality materials and are manufactured under the
strictest quality controls. We guarantee all our products or parts thereof against faulty manufacture
for a period of one year from date of purchase This guarantee is not effective against accidental
damage or damage caused by incorrect use or neglect. This does not affect your statutory rights.
This product has been designed and manufactured to EN716 -1:2017+AC:2019 and BS 8509:2008+A1:2011.

Notes

Join Us
Follow us on Facebook
TuttiBambiniUK
Follow us on Twitter
TuttiBambiniUK
Follow us on Instagram
TuttiBambiniUK

www.tuttibambini.com