TV One LM-1750HD User manual

Instruction Manual
LM-1750HD
Multiple Format 17” Color LCD Monitor

Table of Contents
1.0 Introduction 4
2.0 Specifications 5
3.0 Checking Package Contents 7
4.0 Connecting The Hardware 7
5.0 Operating The Unit 9
6.0 Troubleshooting 11
7.0 Limited Warranty 11
8.0 Regulatory Compliance 12
9.0 Contacts 13

2
1.0 INTRODUCTION
The LM-1750HD is a high performance Multi-format 17” Color LCD Monitor for the
broadcast and professional market. A multitude of video signal formats may be
accurately monitored. The high brightness, wide viewing angle, excellent contrast ratio
and high definition color result in an outstanding image. The unit features inputs for SDI
(either SD or HD) with an active output, HDMI, Analog RGBHV, YUV or YPbPr
Component Video and 2x Composite Video. An YC input is available and can be used
in lieu of one of the Composite inputs. NTSC and PAL Television Standards are
supported and automatically detected. Five Stereo inputs are also provided and dual
internal speakers driven by a 3 watt amplifier provide stereo audio monitoring capability.
Front panel Tally LED’s can be activated external via the DB9 connector. Our
professional video conversion products have been serving the industry for over twenty
years. TV One offers a full line of high quality Seamless Switchers, Video Scalers,
Up/Down/Cross Converters, Analog-Digital Converters (SD/HD-SDI, HDMI, DVI),
Format Converters, Standards Converters, TBC/Frame Synchronizers, Matrix Routing
Switchers, Signal Distribution Amplifiers and Cat.5 Transmission Systems.
1.1 Liability Statement
Every effort has been made to ensure that this product is free of errors. TV One cannot
be held liable for the use of this hardware or any direct or indirect consequential
damages arising from its use. It is the responsibility of the user of the hardware to check
that it is suitable for his/her requirements and that it is installed correctly. All rights
reserved. No parts of this manual may be reproduced or transmitted by any form or
means electronic or mechanical, including photocopying, recording or by any
information storage or retrieval system without the written consent of the publisher.
TV One reserves the right to revise any of its hardware and software following its policy
to modify and/or improve its products where necessary or desirable. This statement
does not affect the legal rights of the user in any way.
All third party trademarks and copyrights are recognised. The TV One Logo, TV One-
Task, AV Toolbox Logo and CORIO are the registered Trademarks of TV One. All other
trademarks are the property of their respective holders.
1.2 Features
The LM-1750HD has many features that enable it to perform in a superior manner:
•Inputs: SD/HD-SDI, HDMI, Analog RGBHV, Component, Composite and YC (S-Video)
•Resolutions up to 1400x900, 1080p
•High Brightness, Pro Grade LCD Panels
•16.7 Million Colors
•5x Stereo Audio Inputs
•Blue Only and Sync Delay modes for easy setup
•Tally LEDs
•130° Left/Right and 120° Up/Down Viewing Angles
•Vertically Tiltable Rackmount Housing

3
2.0 SPECIFICATIONS
LCD Panel
Display Size - Diagonal 17.1” (434mm)
Display Area 14.45”x 9” (367.2 x 229.5mm)
Panel Resolution 1440x900
Dot Pitch 0.255mm
Color Resolution 16.7 Million Colors
Contrast Ratio 800:1
Brightness 250 cd/m2
Response Time 8 msec
Left/Right View Angle 130°
Up/Down View Angle 120°
Aspect Ratio 16:10
Video Inputs
SD/HD-SDI 1x via BNC with Active Output
HDMI 1x via HDMI Type A
Analog RGBHV 1x via HD-15 Female
Composite Video 2x via BNC Connectors
YC (S-Video) 1x via 4-Pin Mini-DIN Connector
YUV/YPbPr Component 1x via 3 BNC Connectors
SD/HD-SDI Input Range
SDTV 480i, 576i
HDTV 480p, 576p, 720p, 1080i, 1080p/30
625i 720x625i @ 50Hz
525i 720x525i @ 59.94Hz
720x525i @ 60Hz
720p 1920x720P @ 50Hz
1920x720P @ 59.94Hz
1920x720P @ 60Hz
1035i 1920x1035i @ 59.94Hz
1080i 1920x1035i @ 60Hz
1920x1080i @ 50Hz
1920x1080i @ 59.94Hz
1920x1080i @ 60Hz
1080p 1920x1080PSF @ 23.98Hz
1920x1080PSF @ 24Hz
1920x1080P @ 23.98Hz
1920x1080P @ 24Hz
1920x1080P @ 25Hz
1920x1080P @ 29.97Hz
1920x1080P @ 30Hz
HDMI Input Range
SDTV 480p, 576p, 720p, 1080i, 1080p
HDTV 480i, 576i
Analog Component Input Range
SDTV – YUV 480i, 576i
HDTV - YPbPr 480p, 576p, 720p, 1080i, 1080p
Analog RGBHV Input Range
640x350 70, 85Hz
720x350 70, 85Hz
640x400 56, 70, 85Hz
720x400 70, 85Hz
640x480 60, 66, 72, 75, 85Hz
800x600 56, 60, 70, 72, 75, 85Hz
1024x768 60, 70, 72, 75, 85Hz

4
1152x864 60, 70, 72, 85Hz
1440x900 60, 70, 72, 85Hz
Composite & S-Video Input Range
Vert. Frequency NTSC 60Hz, PAL 50Hz
Horiz. Frequency NTSC 15.75KHz, PAL 15.625KHz
Audio Inputs
Stereo Audio 4x via 2 RCA Connectors (R/L)
Computer Audio 1x via 3.5mm Mini-Stereo Jack
Tally Control
Tally Input 1x via DB9 Connector
General
Display Element Active Matrix TFT
Video Adjustments Brightness, Contrast, Sharpness, Color, Hue, Black Stretch
Menu Languages English, French, German, Portuguese
TV Standards NTSC/ PAL/SECAM Auto-detect
Color Depth 24 bit
Aspect Ratio Modes 16:9, 4:3, 1:1
HDMI Compliance Version 1.2
SD-SDI 270Mbps (525/625 Line)
HD-SDI 1.485, 1.4835Gpbs
Blue Only Mode For Setup with Color Bars
Sync Delay Mode For Checking Sync
Speakers Internal – Right & Left Channel
Audio Controls Volume, Balance, Bass, Treble, Super Bass
Front Panel Control Buttons
Menu Navigation Menu, Left, Right, Up, Down
Input Select HDMI, PC, YPbPr, SDI, AV1(YC or CV), AV2 (CV)
Power On/Off
Limited Warranty
Unit, except LCD 1 Year Parts and Labor
LCD Panel Panel Manufacturer’s Terms
Mechanical – With Rackmount
Size (H-W-D) 483.5x310x59.7mm(19”x12.25”x2.33”)
Weight (Net) 9.0 kg (19.8 lbs)
Rackmount 7RU - Tilt Up/Down
Mechanical – Without Rackmount
Size (H-W-D) 437x300x59mm(17.2”x11.8”x2.3”)
Weight (Net) 8.0 kg (17.6 lbs)
Wall Mount VESA Standard
Environmental
Operating Temperature -10° to +50° C (+14° to +122° F)
Operating Humidity 10% to 90%, Non-condensing
Storage Temperature -10° to +60° C (-14° to +140° F)
Storage Humidity 10% to 90%, Non-condensing
Power Requirement
External Power Supply 12VDC @ 4A
Regulatory Approvals
Monitors FCC, CE, RoHS
Power Supplies UL, CUL, CE, PSE, GS, RoHS
Accessories Included
1x Power Adapter US, UK or Euro
1x Operations Manual
4x Rackmount Screws
1x Set Rackmount Ears Tiltable Configuration

5
3.0 CHECKING PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make certain the
following items are contained in the shipping carton:
•1x LM-1750HD 17” Color LCD Monitor
•1x Operations Manual
•4x Rackmount Screws
•1x AC Power Adapter Mounting Bracket
•1x AC Power Adapter
Note: Please retain the original packing material should the need ever arise to return
the unit. If you find any items are missing, contact your reseller or TV One immediately.
Have the Model Number, Serial Number and Invoice available for reference when you
call.
4.0 CONNECTING THE HARDWARE
Refer to the illustrations below. The first drawing is the front view of the LM-1750HD.
This drawing will allow familiarization with the overall layout the unit.

6
The next drawing shows the Input and Output connectors plus the DC Power Input.
Connect the cables from the desired video or PC source to the appropriate input. In the
case of the SDI/HD-SDI input, you may loop the output to another device if you wish.
Connect the furnished AC to 12 VDC adapter and gently rotate the connector barrel to
lock in position. Lastly, if tally operation is desired, wire a mating DB-9 plug for the tally
connector and connect it to the monitor. Shorting pins 1 and 6 on the Tally connector
will cause the Tally LEDs at the top of the front panel to illuminate.
4.1 Power Supply Bracket and VESA Mounting Provision
As seen in the illustration below, a bracket is provided that can be affixed to the left, rear
of the monitor to hold the AC Adapter. If desired, attach the bracket and place the AC
adapter in the bracket is such a manner as to prevent physical interference with other
equipment in the rack.
Four (4) pre-drilled and threaded attach points are provided in the center to allow
mounting of the LM-1750HD directly to a wall or other structure using VESA 100mm
standard mounts available from third party vendors. Please note that the rack ears
remain in place, even when a VESA mount is used. Also, use of a VESA mount may
preclude the use of the AC adapter mounting bracket.

7
5.0 OPERATION OF THE LM-1750HD
After mounting the LM-1750HD in a rack and connecting the appropriate cables and the
AC adapter, press the power button, select the appropriate input and adjust the vertical
viewing angle if desired.
Input selection is made by pressing the appropriate button on the front panel. The
possible selections are HDMI, PC, YPbPr, SDI, AV1 (either Composite Video or S-
Video, but not both at the same time) and AV2 (Composite Video).
Once the input selection has been made, you may choose the image’s aspect ratio and
also adjust the audio volume of the monitor’s built in speakers.
5.0.1 Aspect Ratio Adjustment
The vertical arrows allow you to cycle through three possible aspect ratios: 4:3, 16:9
and 1:1. 4:3 is the standard analog aspect ratio used in NTSC and PAL formats for
most video signals. 16:9 is the de-facto standard for High Definition Video signals as
well as some standard definition video such as the occasional non-HDTV DVD video
signal. The 1:1 selection equals a pixel ratio of 1:1. It allows a display of signals in their
native resolution. If the signal does not fill the screen due to its resolution, it will be
displayed in actual size. Resolutions beyond the capability of the LM-1750HD will not be
visible.
5.0.2 Audio Level Adjustment
To adjust the audio level, use the two horizontal arrows. The right arrow increases the
audio level and the left arrow reduces the audio level.
5.1 Using the On Screen Display Menus
Beyond simple use of the monitor, users should acquaint themselves with the On
Screen Display (OSD) and Menu structure. Within this functionality the user can fine
tune the operation of the unit and often make improvements to the appearance of the
displayed image. Using the OSD menu is not difficult and allows you to adjust the
picture quality of the monitor.

8
5.1.1 Menu Navigation:
To utilize the menu and the OSD, press the Menu button. This makes the Menu list
appear and you will then use the four arrow buttons to navigate the list and make
adjustments. The up and down arrow buttons allow you to scroll through the list and the
left and right arrow buttons allow an adjustment or selection to be made.
The Menu List and Function are as follows:
Menu Item Function
Brightness Adjust Brightness of image - 0-100 Relative Indication
Contrast Adjust Contrast of image - 0-100 Relative Indication
Sharpness Adjust Sharpness of image - 0-100 Relative Indication
Color Adjust Color Level of image - 0-100 Relative Indication
Tint Adjust Color Tint of image - 0-100 Relative Indication
Black Extension Black Stretch
Aspect Ratio Selects 4:3, 16:9 or 1:1 Aspect Ratio
Blue Key Selects only the Blue Channel for Display of Image
Sync Delay ( H/V delay) Used for Displaying Sync and Blanking Timing
Language: English/French/German/Portugal OSD Language
Blue Screen Selects Blue screen or Black Screen upon Signal Loss
Color Mode: Allows Independent Adjustment of R,G or B Color Level
USER R Sub Menu from Color Mode. Sets Red Channel Gain
USER G Sub Menu from Color Mode. Sets Green Channel Gain
USER B Sub Menu from Color Mode. Sets Blue Channel Gain
Load Default: Reverts all settings to factory defaults.
Backlight Sets LCD Display Backlight Level
Sleep Allows Power Down in 15 minute increments
No TV Signal OFF No Function for this Model Monitor
No Signal OFF No Function for this Model Monitor
No Operation OFF No Function for this Model Monitor
Balance Balances Audio Outputs Between the Speakers
Bass Adjust Bass Audio Level
Treble Adjusts Treble Audio Level
Super Bass Enhances Bass Level above Standard Response

9
6.0 TROUBLESHOOTING
If the LM-1750HD 17” LCD Monitor does not appear to be functioning properly, be
certain that the source and any other device connected to the unit is functioning
correctly by connecting each device currently connected to the LM-1750HD to another
monitor. (In other words, bypass the LM-1750HD to insure that the problem is not with
the source device.) If the signal is present under those conditions, make certain that
power is present to the LM-1750HD. If it is, check all cables for damage. Cables should
be undamaged, as short as possible and should be premium quality.
Note: It is strongly recommended that you use premium cables in order to achieve
maximum distance cable runs and the best performance possible.
After trying the above suggestions should the problem still persist, contact your dealer
for additional suggestions before contacting TV One. Should the dealer’s technical staff
be unable to assist you, contact TV One via our support website:
http://tvone.crmdesk.com. Create a technical support request on the site and our
support team will respond within a short period of time.
7.0 LIMITED WARRANTY
LIMITED WARRANTY – With the exceptions noted in the next paragraph, TV One
warrants the original purchaser that the equipment it manufactures or sells will be free
from defects in materials and workmanship for a period of two years from the date of
purchase. Should this product, in TV One’s opinion, prove defective within this warranty
period, TV One, at its option, will repair or replace this product without charge. Any
defective parts replaced become the property of TV One. This warranty does not apply
to those products which have been damaged due to accident, unauthorized alterations,
improper repair, modifications, inadequate maintenance and care, or use in any manner
for which the product was not originally intended.
Items integrated into TV One products that are made by other manufacturers, notably
computer hard drives and liquid crystal display panels, are limited to the term of the
warranty offered by the respective manufacturers. Such specific warranties are
available upon request to TV One.
If repairs are necessary under this warranty policy, the original purchaser must obtain a
Return Authorization Number from TV One and return the product to a location
designated by TV One, freight prepaid. After repairs are complete, the product will be
returned, freight prepaid.
LIMITATIONS - All products sold are "as is" and the above Limited Warranty is in lieu of
all other warranties for this product, expressed or implied, and is strictly limited to two
years from the date of purchase. TV One assumes no liability to distributors, resellers or
end-users or any third parties for any loss of use, revenue or profit.

10
TV One makes no other representation of warranty as to fitness for the purpose or
merchantability or otherwise in respect of any of the products sold. The liability of TV
One with respect to any defective products will be limited to the repair or replacement of
such products. In no event shall TV One be responsible or liable for any damage
arising from the use of such defective products whether such damages be direct,
indirect, consequential or otherwise, and whether such damages are incurred by the
reseller, end-user or any third party.
8.0 REGULATORY COMPLIANCE
The LM-1750HD has been tested for compliance with appropriate FCC and CE rules
and regulations. The Power Adaptor/Supply has been tested for compliance with
appropriate UL, CUL, CE, PSE, GS Rules, Regulations and/or Guidelines. This Product
and Power Adapter is RoHS Compliant.

11
9.0 CONTACT INFORMATION
Should you have questions or require assistance with this product in areas not covered
by this manual, please contact TV One at one of these locations.
End of Manual
TV One USA
1350 Jamike Drive
Erlanger, KY 41018
USA
Tel [phone]
Fax [phone]
[email protected]
www.tvone.com
TV One Europe
Continental Approach
Westwood Industrial Estate
Margate, Kent CT9 4JG, UK
Tel [phone]
Fax [phone]
[email protected]
www.tvone.co.uk
TV One Latin America
2790 NW 79 Ave
Miami, FL 33122
USA
Tel [phone]
Fax [phone]
[email protected]
www.tvonela.com
TV One Mercosur
Honduras 5849, 2nd Floor, Office C
(C1414BNI) Capital Federal
Buenos Aires, Argentina
Tel [phone]
Fax [phone]
[email protected]
www.tvonela.com
TV One Asia
11F, NO.28, Sec. 2
San-Min Rd, Panchiao City
Taipei Hsien 220
Taiwan R.O.C.
Tel [phone]
Fax [phone]
[email protected]
www.tvoneasia.com
TV One China
Rm.9C, Neiwailian Building
No.518 Shangcheng Road
Pudong, Shanghai
China 200120
Tel [phone]
Fax [phone]
Email: [email protected]
Website: www.tvonechina.com