Twin-Star International 36II100GRG User manual

www.tsicustomerservice.comA113 1
Twin-Star International, Inc; Delray Beach, FL 33445
Made in China • Printed in China • Fabricado en China • Impreso en China • Fabriqué en China • Imprimé en Chine
www.tsicustomerservice.com
1-866-661-1218
MODELS/ MODELOS:
36II100GRG, 47II100GRG
Español P.26

2www.tsicustomerservice.comA113
Table of Contents
Safety Information ......................................................... 3
Warranty ........................................................................ 4
Pre-Operation................................................................ 5
Pre-Assembly ................................................................ 6
Hardware Included ............................................... 6
Product Specifications............................................. 6
Tools Required ........................................................ 6
Package Contents ................................................... 7
Installation Options........................................................ 8
Wall Hanging .......................................................... 9
Pedestal Base ...................................................... 12
Built In Construction ............................................. 14
Fuel Bed Setup Instructions ................................. 18
Operation..................................................................... 20
FCC/IC Information...................................................... 23
Care & Cleaning .......................................................... 23
Troubleshooting........................................................... 24
Replacement Parts...................................................... 25

3www.tsicustomerservice.comA113
SAVE THESE INSTRUCTIONS
When using electrical appliances, basic precautions should always be followed to reduce the risk of re, electrical shock, and injury to
persons including the following:
1. Read all instructions before using this appliance.
2. This appliance is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving
this appliance. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet (0.9 m)
from the front of this appliance and keep away from the sides and the rear. WARNING: In order to avoid overheating,
do not cover the heater.
3. CAUTION: Never leave the heater operating unattended. Extreme caution is necessary if unsupervised children or invalids are
nearby.
4. The appliance is not to be used by children or persons with reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction.
5. Always unplug this appliance when not in use.
6. Do not operate any heater with a damaged cord or plug or after the appliance malfunctions, or if it has been dropped or damaged
in any manner.
7. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualied persons in order to
avoid a hazard.
8. Do not use outdoors.
9. This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate this appliance where it
may fall into a bathtub or other water container.
10. Do not run cord under carpeting. Do not cover cord with throw rugs, runners or the like. Arrange cord away from trafc areas and
where it will not be tripped over.
11. To disconnect this appliance, turn controls to the off position, then remove plug from outlet.
12. Connect to properly grounded outlets only. This heater is for use on 120 volts. The cord has a plug as shown at A in Fig.1 Do not
use a 2 prong adapters. Never use with an extension cord or relocatable power tap (outlet/power strip).
13. This appliance, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with
the current CSA C22.1 Canadian Electrical Code or for U.S.A. installations, follow local codes and the National Electrical Code,
ANSI/NFPA NO.70.
14. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or re, or
damage the appliance.
15. To prevent a possible re, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where opening
may become blocked.
16. This appliance has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint or ammable liquids are
used or stored. This replace should not be used as a drying rack for clothing. Christmas stockings or decorations should not be
hung in the area of it.
17. Use this appliance only as described in the manual. Any other use not recommended by the manufacturer may cause re, electric
shock or injury to persons.
1. Read all instructions before using this appliance.
2. This appliance is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving
this appliance. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet
(0.9 m) from the front of this appliance.
WARNING: In order to avoid overheating, do not cover the heater.
3. CAUTION: Whenever the heater is left operating and unattended, extreme caution is necessary if children or invalids are nearby.
4. The appliance is not to be used by children or persons with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or instruction.
5. Always unplug this appliance when not in use.
6. Do not operate any heater with a damaged cord or plug or after the appliance malfunctions, or if it has been dropped or
damaged in any manner.
7. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualied persons in order
to avoid a hazard.
8. Do not use outdoors.
9. This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate this appliance where it
may fall into a bathtub or other water container.
10. Do not run cord under carpeting. Do not cover cord with throw rugs, runners or the like. Arrange cord away from trafc areas
and where it will not be tripped over.
11. To disconnect this appliance, turn controls to the off position, then remove plug from outlet.
12. Connect to properly grounded outlets only, See Fig.1. Do not use a 2 prong adapters.
13. This appliance, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes,
with the current CSA C22.1 Canadian Electrical Code or for U.S.A. installations, follow local codes and the National Electrical
Code, ANSI/NFPA NO.70.
14. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or re, or
damage the appliance.
15. To prevent a possible re, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where
opening may become blocked.
16. This appliance has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint or ammable liquids are
used or stored. This replace should not be used as a drying rack for clothing. Christmas stockings or decorations should not be
hung in the area of it.22. Use this appliance only as described in the manual. Any other use not recommended by the
manufacturer may cause re, electric shock or injury to persons.
17. Always plug heaters directly into a wall outlet/ receptacle. Never use with an extension cord or relocatable power tap (outlet/
power strip).
IMPORTANT INSTRUCTIONS
When using electrical appliances, basic precautions should always be followed to reduce the risk of re, electrical shock, and injury
to persons including the following:
2
ABFig.1
SAVE THESE INSTRUCTIONS
IMPORTANT INSTRUCTIONS

4www.tsicustomerservice.comA113
The manufacturer warrants that your new Electric Fireplace is free from manufacturing and material defects for a period
of one year from date of puchase, subject to the following conditions and limitations.
1. Install and operate this appliance in accordance with the installation and operating instructions furnished with the
product at all times. Any unauthorized repair, alteration, willful abuse, accident, or misuse of the product shall nullify
this warranty.
2. This warranty is non-transferable, and is made to the original owner, provided that the purchase was made through
an authorized supplier of the product.
3. The warranty is limited to the repair or replacement of part(s) found to be defective in material or workmanship,
provided that such part(s) have been subjected to normal conditions of use and service, after said defect is conrmed
by the manufacturer’s inspection.
4. The manufacturer may, at its discretion, fully discharge all obligations with respect to this warranty by refunding
the wholesale price of the defective part(s).
5. Any installation, labor, construction, transportation, or other related costs/expenses arising from defective part(s),
repair, replacement, or othe wise of same, will not be covered by this warranty, nor shall the manufacturer assume
responsibility for same.
6. The owner/user assumes all other risks, if any, including the risk of any direct, indirect or consequential loss or
damage arising out of the use, or inability to use the product,except as provided by law.
7. All other warranties – expressed or implied –with respect to the product, its components and accessories, or any
obligations/liabilities on the part of the manufacturer are hereby expressly excluded.
8. The manufacturer neither assumes, nor authorizes any third party to assume on its behalf, any other liabilities with
respect to the sale of the product.
9. The warranties as outlined within this document do not apply to non accessories used in conjunction with the
installation of this product.
10. This warranty gives you specic legal rights, and you may also have other rights which vary from state to state.
This warranty is void if:
a. The replace is subjected to prolonged periods of dampness or condensation.
b. Any unauthorized alteration, willful abuse, accident, or misuse of the product.
c. You do not have the original receipt of purchase.
www.tsicustomerservice.com
For Customer Service Call 1-866-661-1218
Questions? Our experts are standing by assist you at our Toll-Free help line, we can help you with assembly,
and, if necessary replace damaged/missing parts. Assistance is available 7 days a week/24 hours a day/
365 days per year.
IMPORTANT:
Before contacting Customer Service please have this information available:
 •SerialNumber
 •ModelNumber
 •SalesReceiptorProofofPurchase
1-Year Limited Warranty
Customer Service

5www.tsicustomerservice.comA113
M
a
n
e
g
M
o
d
e
l
/
M
o
d
è
l
e
/
M
o
d
e
l
o
:
4
7
H
F
1
00
G
R
G
S
N
#
:
A
B
-
1
2
3
4
5
-
A
K
ee
p
t
h
i
sn
u
m
b
e
r
f
o
r
s
e
r
v
i
c
e
!
G
a
r
d
ez
c
e
n
u
m
é
r
o
p
o
u
r
l
e
s
e
r
v
i
c
e
!
t
ae
s
t
e
n
ú
m
e
r
o
p
a
r
a
s
e
r
v
i
c
i
o
!
Pre-Operation
1. Remove the product identication sticker from the front of the replace and the twist-tie from the logset.
Product
Identication
Sticker
2. Attach the Product Identication Sticker to this Manual below for future reference. This information is used for product registration and
also is necessary for customer service.
3. Go to www.tsicustomerservice.com for product warranty registration. If you are unable to complete registration save your proof of
purchase for warranty purposes.
Attach Product Identication Sticker Here
Twist-tie

6www.tsicustomerservice.comA113
Part Description Part Number Quantity
AA Anchor Screw 3647HF-AA 4
BB Wall Anchor 3647HF-BB 4
CC Screw 4mm x 8mm (2 Pre-Attached) 3647HF-CC 4
DD Screw 4mm x 6mm (3 Pre-Attached) 3647HF-DD 8
EE Screw 3647HF-EE 7
FF Flat Head Screw 3647HF-FF 2
GG Screw (Pre-Attached) 3647HF-GG 2
HH Wall Bracket 3647HF-HH 4
II Small Base Bracket 3647HF-II 1
JJ Washer 3647HF-JJ 4
Pre-Assembly
HARDWARE INCLUDED
AA DD
BB CC EE
FF GG
NOTE:
Hardware not shown to actual size.
PLANNING ASSEMBLY
Before beginning assembly of product, make sure all parts are present. Compare parts with Hardware Included and Package Contents lists.
If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement
parts.
Estimated Assembly Time: 60 Minutes
Phillips Screwdriver
HH
PRODUCT SPECIFICATIONS
Voltage 120 VAC, 60 Hz
Amps 12.5 Amps
Watts 1500 Watts
JJ
II
Tools Required for Assembly (not included): Phillips screwdriver, Drill, Hammer, Level
LevelDrill Hammer

7www.tsicustomerservice.comA113
Part Description Quantity
A Mounting Bracket (Pre-Attached) 1
B Fireplace 1
C Front Frame 1
D Base Bracket 1
EBase 1
F Remote Control 1
G Decorative Rocks Varies
HTransparent Tray Assembly 1
I Fireglass Varies
PACKAGE CONTENTS
Pre-Assembly (continued)
ABC
D E FGHI

8www.tsicustomerservice.comA113
Operation
Installation Options
Option 1
Option 3
Option 2
Wall Hanging....page 9
Built in construction....page 13
Pedestal Base....page 12
The replace can be installed with
3 options:
1. Wall hanging to the wall with provided mounting bracket.
2. Stand with the pedestal base.
3. Built in construction.
Follow installation instructions below based on installation
preference.

9www.tsicustomerservice.comA113
Operation
Installation - Wall Hanging
WALL HANGING TO THE WALL WITH PROVIDED MOUNTING BRACKET
Your new electric replace may be installed virtually anywhere in your home. However, when choosing a location be sure to follow the
general instructions included. For best results install out of direct sunlight. Power supply service must be either completed or placed within
the electric replace prior to nishing to avoid reconstruction.
Sides 2 in. / 5 cm
Floor 2 in. / 5 cm
Top 2 in. / 5 cm
Back 0 in. / 0 cm
WARNING: Keep drapery and other furnishings at least 3 ft / 1 m
from the front and sides of the electric replace.
Clearance to combustibles
Min. 5 cm
2 in.
Min. 5 cm
2 in.
Min. 5 cm
2 in.

10 www.tsicustomerservice.comA113
Operation
Installation - Wall Hanging
3Drilling the Holes
1Removing the Mounting Bracket 2Choosing a Wall Location
Remove the Mounting Bracket (A) from the back of the
Fireplace (B) by removing the two pre-attached Screws
(CC) at the top back of the unit.
Choose a wall location to attach the Mounting
Bracket (A). Position the Mounting Bracket (A)
in the desired location.
Use a level to align the bracket and mark the four holes
with a pencil.
Drill four 5/16 in. (8 mm) holes in the wall.
Insert the Wall Anchors (BB) into the holes using
a hammer. BB
B
A
A
CC